Please show us how you remove the handle first from the vehicle

Glad I found this. Should be noted that when the handle is still mounted in the door, the slot where you access that clip faces downward. A little hook tool is your friend it getting it off of there!

Outstanding. I only spent half an hour being frustrated before finding this video. Why so many people leave out crucial information like that little clip I will never understand. Thank you sir.

I don’t know how this video doesn’t have 100k + views. You just saved me so much time and aggravation.

This video was just the insight I needed! Thank you so much for posting it. The clip was a bit challenging to get out, but I did manage to do it. Since I was just fixing a broken lock, I didn't need to remove the handle. A tip for those trying to get the clip back in without removing the handle or maybe even if you do - insert a 11mm socket into the lock hole while you're pushing the clip back into place. It'll just snap right into position. Thanks again for the video; I wouldn't have been successful without it!

Thanks for the video, my husband was trying to figure out how to remove lock and I found your video. Two min later Im a hero.

I watched this video twice before working on this project and I still had to go back and see it again when I got stuck. This video is a life saver. Thank you!

I just spent the last 6 hours trying to replace the cylinder. The metal plate and clip was the biggest issue. This video really helps he understand on how to remove the metal plate. Thank you for sharing.

Thank you. Was trying to take the cylinder out. Couldn't figure out why the cylinder didn't come out until I saw your video. Tq again

Glad the video helped you, i try to show how to videos without telling my life story first, and just get to the details.

Thank you! I was able to replace and transfer lock to the new door handle. All good now. I appreciate this video

Life saver video!!! Thank you. I just spent 3 hours changing the lock cylinder from inside the door. (I thought it to be much easier than taking all this apart). I could do it again in less than an hour, now that I have a real visual of what comes apart and how. That clip does come out very easy once it is understood where it is to pull. It is where that groove is. The cylinder does slide right in once the clip is back in place. Hardest part was getting the clip back in place. It was very tricky and my neck is tweaked from looking at that awkward angle and through one of the fastener holes. Thanks again!

Oh man, this is why i like the internet! You sir have saved me a big headache trying to take this off! God bless you! God bless youtube! And god bless america!

Thanks for this video because i am planning to replace my broken handle.

Thank you so much, I had been struggling for R&I the handle. It is extremely useful. Thank you so much again!

Thanks a million for this video, I can't tell you, how much time and frustration you saved me.👍

Thank you for sharing, God bless you and your family. This video helped me, I was trying so hard to get it out.

Thank you for the video. I knew something was preventing the removal - that bloody hidden clip. That was the ticket. Much appreciated.

It took you an hour to figure out, I took me 30 seconds because I watch your video , 😂

I just want to thank you for this video saved me about 1 lol i didn't want to stress so found this helpful video good work bro

LIFE SAVER!!!!!! Spent a cotton pic'n hour on that stupid thing. 1:30 into your video I put the phone down, had the lock changed and the door back together within 7 minutes. Thank you kind sir.

Thanks for adding this. Wish I only spent an hour on this.

Ok I did replace the door lock cylinder on 7/13/2020. Yes is wasn't fun but got it!!! I suggest using a small hook awl. I bought a 4 piece hook and pick set. ULLMAN from Amazon. Took a while but was able to get the hook awl behind and over the C clip. Put a glove on please. Had to pull very hard then came loose. Put a white plastic trash bag in bottom of door because it will drop down there. Then, push out old cylinder from the outside towards inside. You will need to push new cylinder into place firmly, then you can push the C clip straight up, not at an angle. I attached and twisted small gauge safety wire at bottom center. If you drop clip, you can find it. Dont have to remove the wire after. Ugly job but success! Thanks for this awesome video. Note:, you can't remove the door handle without removing the door lock cylinder first. I did Not remove the door handle or the bolt behind the door lock cylinder!!

Thank you man for your video helping me a lot

Thank you very much for the exact explanation, I tried for half an hour to find how to download it

Thabks i try for days find some like this is the same for acura mdx 2003 thanks again bro

YES!!!! Couldn't have done this job without the video. ROCK ON!

Such a big help! THANK YOU!!!

Thank you so much for the video. Helped a lot!

Thanks this helped a lot! Old one got brittle and just broke off when I took it off

Thank you for making this video🙏

Excellent demo with handle out of the door!

Muchas Gracias! Me has ayudado muchísimo!

Likewise saved me time and probably damaging this a further...thanks for the video!!

Thank you very much, for this Detail (Clip) Video

You’ve made an outstanding video that has saved people (including me) probably countless hours of frustration. Thank you.

Thank you very detailed video straight to the point

Tanks for your video it's very helpful for me... Hands to work

4 years ago and still help... thbks you

Niiiice thank you.for this vid.saved me some time after 20min i said no way need to.research this and found this vid.

Super video !!!

Big help. Thank you.

Thank you for the info. I almost raged at the door.

Thanks, easy to follow😊😊

Thank you for the video. Do you happened to have the part number of the handle? is to replace the broken

Great video sir ty

Thank you so much my dude!

I wish i found this 2 hrs ago! Thanks

The plastic piece bracket with the the roller cracked and needs to be replaced. Honda doesn't seem to offer this. Any ideas where to get a replacement?

Is it possible to take door handle off door before removing the lock cylinder? My door handle is still on the door and in seems impossible to get door handle off without first removing lock cylinder

really good tips

Tnks for the video👍🏻👍🏻👍🏻👍🏻

Thank you, thank you, thank you!

What a pain in the arse!!! Thanks for the help though!

How did you take it out?

Bless this man

Buen video . Amigo saludos .

Awesome! Thanks!

Not related, but helped me replace the lock of my 99 hrv. conceptually the same, just different execution.

Is that the door handle to the back trunk door

AWESOME................. Thank You......

Thank you so much bro

Thank you

Thanks so much. 👍

But *HOW* did you remove this.........that is the question??????? The video is on HOW to remove it.....BUT YOU HAVE ALREADY REMOVED IT.........I wanted to know how you get the whole thing out!

Thank you so much

Not all heroes wear capes 🫡

Thank you.

Thank you 🙏

Thanks!!!

Nice one thanks

This is perfect

So I have a question about my 02-04 (05-06) CRV passenger door lock itself that you showed here... So my Drivers Side Door was either replaced at one point, or the door handle was broken and somebody replaced the handle and forgot to swap in the original Door Lock (either way its NOT THE ORIGINAL DRIVERS SIDE KEY LOCK cause it WON'T FIT MY KEY)... But my KEY DOES MATCH up an WORK in the LOCK on the PASSENGER SIDE DOOR! So my question is... Can I swap that Lock over to the DRIVERS SIDE Door? And if so would I have to flip turn it left to right ways (like a wooden Top toy would spin)? Or spin it 180° (like doing a cartwheel on the grass lol) so that the N side of the Lock in it's vertical key slot resting position (12 o'clock position), is now in the S 6 o'clock position, and the former South position is now at the North position for the Passenger Lock to be able to now work on the DRIVERS Side? I know that twisting the key one way or the other will pull the lever, or retract the lever, as well as the metal rods to lifting up the plastic door lock (the physical plastic lock you can pull up with your fingers on the inner door panel just below the glass window 😆), so I don't want to install it only to find out that it possibly might be wrong... The gold metal lock tumblers I noticed are on the top side of the Lock facing N at the 12 o'clock position, but I'm not sure if they can still be at the 6 o'clock position or not because then I'd assume they'd be slid down and open even without a key, causing you to be able to get into the car by just simply inserting a screwdriver 🪛 and freely turning it without even using a key (instead of the typical tumblers keeping lock locked into stationary position and from turning like they're supposed to do). Any suggestion would be of help but It seems as though the lock could be swapped to the DRIVERS SIDE

Thak you my friend

saved me a lot of grey hairs

This shows how to take it apart you should have done this while it’s in the door still

Can You tell us, how's to take out the the handle from the door, please!

Ok but how did you get the handle out from the door ?

Also, good to know the Honda dealership can order the dang C clip for the door lock cylinder if you loose or bend yours. $4.25 with tax!

Thx

Tq

To good explain

it is impossible to get that pin out, it just will not come out. they make it so hard to get to that it will drive you insane, decided I will live with having to open the drivers door from the inside.

Its the drivers outer door handle

Gawd this suck so so so bad, doing one yesterday .. kicked my ass so hard

You never say how to get it out the door to get the clip out side is simple

how removed, that front the door,not show how ,out is easy.

Very sorry ,its difficult to show inside the door shell w a camera, just imagine a thin piece of sheet metal , and a little wiggle

damn jesus clips strike again smh

Wanted to believe this video was of anymore value than the 10 seconds of “remove the clip at the bottom” but it’s not (no suggestion to how to actually remove it outside of being able to rotate the handle 360° degrees). 4 minute video that could have been 20 seconds...

So on other words you had such a hard time you didn't record it lol - USELESS

Thank you