047 Sliding dovetail hand plane - version 2.0 Part 1 of 3

Рет қаралды 43,097

Күн бұрын

Hello! Some of you noticed on my instagram that i'm preparing few pairs of sliding dovetail hand planes. It would be the same kind of planes as i made in my first video of my channel, but this time they will be normal size. The planes will work in pairs - left plane and right plane for booth directions of cutting.
If you dont know how i made the boxing on this plane blanks just watch my previous video.
As usually i decided to make video of bulding process, but as one part it would be to long so i decided to make it in 3 parts.
Every step is decsribed on the timeline so you can easly read what i'm doing in any moment of the video.
I hope you will like it!
Regards!
BTW. I don't take orders and usually don't sell my planes (exception - i'm gonna sell one pair of this sliding dovetail planes on my instagram profile when they will be done). The most sure way to get some of them is take a part in giveaways for my supporters.
For support click here:
/ @stavrosgakos
or use my PayPal account: esortodox@gmail(dot)com
Big thanks for my supporters!
ANDREW DAWSON
JOSHUA LUCAS
ROSS TOMAZIN
RENE POLAK
LUBOS SULC
RAMINGR
SCOTT MARTIN
BRIAN NEWTON
ŁUKASZ JASIŃSKI
WALTER GRUBE
PMEWUK
MIKE ETHERINGTON
MELINDA JOHNSON
SOTIRIS ZACHAROPOULOS
ARTUR PIETREK
WILLIAM C ALLEN
ANDREJS STROKINS
PATRYK MIKOŁAJCZAK
MACIEK LASZCZ
ALLEN MOCK MD
ANDIEJOY
RICHARD JOHNSON
PAWEŁ CUDNOCH
....................................................................................................
For more check my instagram profile:
/ stavros_gakos

Remember to subscribe my buddy, Łukasz Giergasz
(with engilsh subtitles)
Click here:
• Finał renowacji. Moja ...
Drawings tools: (0:00)
Drawing: (0:13)
Marking the bed location: (0:18)
Marking the breast location: (0:21)
Marking the bed 50 deg: (0:24)
The iron (i'll show it closer in the 3 part): (0:34)
Checking the breast location with the iron: (0:38)
Marking the breast (the wear) angle: (0:46)
It is too narrow to put the iron at this moment, it will be open later: (0:48)
Marking the location of the abutment: (0:50)
Marking the abutment 60 deg: (0:54)
Marking location the tail of conical escapement: (1:12)
Marking location of the escapement center : (1:17)
Marking left side of the escapement: (1:32)
Marking the place for the wedge: (1:53)
Left hand planes done: (2:01)
Right hand planes to go: (2:06)
Repeating the same process: (2:15)
Cutting the bed and the breast on the band saw: (2:51)
Remowing the waste: (4:04)
Drawing the escapement on the second plane of every each plane: (4:35)
Drillng the hole for escapement: (5:27)
Marking the place for the wedge: (6:22)
Removing material to make flat surface during the drilling: (7:07)
Drilling: (9:46)
Ready for the next step: (11:24)
Thank you: (11:27)

Пікірлер: 138

@kieronrobertson575 3 жыл бұрын

Stavros, you are single-handedly reviving the lost skills of wooden plane making and I love it. I have read a lot of books and watched some old videos but you demystify the process. Thank you.

@StavrosGakos 3 жыл бұрын

You're welcome Kieron :)

@melindajohnson3394 3 жыл бұрын

I must admit that this drill press is something I covet each time you use it.

@NineteenSeventy0ne 3 жыл бұрын

Slow and precise, sharp bits don't need speed. Nice piece of kit, quiet too.

@nerfytheclown 3 жыл бұрын

Same. An extremely sensitive-seeming tool. I LIKE my drill press, but I would LOVE that one.

@pmewUK 3 жыл бұрын

Ditto, I love tools that utilise ergonomic mechanics as opposed to electricity. I've never come across one in person.

@rogerhodges7656 3 жыл бұрын

I cringe every time he starts to drill with that drill press!

@nealpedigo2842 3 жыл бұрын

As do I! I have a 1940s electric press, but one like his would do nicely in my shop. I wonder who makes that model?

@karolskakes388 3 жыл бұрын

Your work is so organized and neat. Your work reminds me of the old timers - "Make it well the first time, and it will serve you well". Thankyou for sharing your time with us!

@dirdick43 3 жыл бұрын

Great work I can't wait to see parts 2 and 3. The boxing video showed how precise you are. The jigs to mark and drill plane angles is pure genius.

@StavrosGakos 3 жыл бұрын

Thanks Richard!

@ryandavis7593 3 жыл бұрын

Greetings from the high plains of Texas. I am building a new router plane while also building a new shelving unit for my sons bedroom. My son and I are also finishing up a new kindling box of curly maple for a family at church. Thank you for keeping me inspired to make some saw dust. We pray that you and your family stay healthy during these times.

@ryandavis7593 3 жыл бұрын

P.S. I love your drill press. I have a 1914-15 Yankee drill press with self feeding. It doesn’t have some of the features yours has but makes a similarly pleasing sound.

@StavrosGakos 3 жыл бұрын

Thanks Ryan! All the best for you and your family :)

@sheslop888 Жыл бұрын

Great work! Love your drill press!

@adamsomkowski4460 3 жыл бұрын

Sama przyjemność oglądać fachowca w pracy. Pozdrawiam

@StavrosGakos 3 жыл бұрын

Dziękuję Adam :) pozdrowienia

@worklion50 3 жыл бұрын

I am sipping coffee here in south Texas, thinking... Sir, I have long believed the "old" countries held the greatest crafts-persons. Thanks for proving my point! Your are like a genius beaver! lol... Wish you were a neighbor. Keep you and yours safe in these uncertain times.

@StavrosGakos 3 жыл бұрын

Thank you very much :) all the best for you!

@worklion50 3 жыл бұрын

@@StavrosGakos I put my money where my mouth is...

@StavrosGakos 3 жыл бұрын

That was really kind, thank you very much :)

@worklion50 3 жыл бұрын

@@StavrosGakos I meant what I said, your a smart person with a great channel... I help my brothers...

@StavrosGakos 3 жыл бұрын

@UlisesUlises-xc6wp 3 жыл бұрын

Thanks Master! ✨🌳✨🌳

@luizgabriel3388 3 жыл бұрын

Thank you, Gakos! As a update, my first two trys of plane making fail. The first one I take to much of one parte of the escapment and the other I aim the bed at 55° and end at 60°, but I will continue to try!

@StavrosGakos 3 жыл бұрын

Keep trying Luiz :)

@wolfman75 3 жыл бұрын

Very Nice!!! Great Video!!! Somehow I missed this one. Now onto PT 2!!! Thank You!!!!😎👍😃

@finn127 3 жыл бұрын

Batching them out good friend! Liking the workflow!

@ottogobey3462 3 жыл бұрын

really enjoying this series. Amazing work.

@willmarshall5775 3 жыл бұрын

Interesting to see the use of jigs and lay-out tools! Very industrious, great video!

@StavrosGakos 3 жыл бұрын

Thanks Will!

@pavlospapas9497 3 жыл бұрын

oglądam twoja pracę od jakiegoś czasu Jesteś Artysta w swoim fachu.... Pozdrawiam z Konina

@StavrosGakos 3 жыл бұрын

Dziękuję :) pozdrowienia z Brodnicy!

@pmewUK 3 жыл бұрын

Another great work in progress video. I like the jig you made for your pillar drill, simple and effective. 👍👏

@StavrosGakos 3 жыл бұрын

Thanks Paul!

@luizgabriel3388 3 жыл бұрын

Your videos are increasingly getting better and better at quality!

@barkebaat 3 жыл бұрын

I'm back because I forgot to leave a comment. This is it : COMMENT ! I understand it helps with the KZfaq metrics and such. The very best content as usual :-)

@StavrosGakos 3 жыл бұрын

Thanks:)

@tabhorian 3 жыл бұрын

You sir are a god. I look forward to all of you videos.

@peirob 3 жыл бұрын

Your manual drill press is amazing. I love it, and all your projects also. Congrats

@StavrosGakos 3 жыл бұрын

Thanks Peiro!

@slomkaadas9603 3 жыл бұрын

Aż miło oglądać... Świetna robota, dzięki za kolejny film. Pozdrawiam

@StavrosGakos 3 жыл бұрын

Dziękuję Adam :) pozdrowienia!

@grzegorzchilkiewicz5652 3 жыл бұрын

jak zwykle ogląda się z przyjemnością

@StavrosGakos 3 жыл бұрын

Dzięki!

@oldyoung9379 3 жыл бұрын

This is called the small series. Beautiful work like usely. Thank's.

@heartsparkdollar 3 жыл бұрын

I hope a pair of them are for me! I do enjoy watching you make your planes.

3 жыл бұрын

Fajnie ogarnąłeś tą małą linię produkcyjna. Pozowlę sobie zapierdzielić kilka rozwiązań do produkcji moich znaczników :-)

@StavrosGakos 3 жыл бұрын

Dzięki stary, zapierdziel co chcesz :)

@MichalMech 3 жыл бұрын

@@StavrosGakos uważaj bo przyjedzie i zapierdzieli wiertarkę :P

@StavrosGakos 3 жыл бұрын

Mam dwie 😉

@Vincent-S 3 жыл бұрын

Aaaaa Another plane/pair of planes I want to make. And thank you so much for having some very clear video of the processes, it really helps with learning how to do stuff like this. Still mad jealous of your drill press, too ;)

@StavrosGakos 3 жыл бұрын

Thanks Vincent!

@cezarytomalski8354 3 жыл бұрын

Teraz to mała fabryczka, aż miło popatrzeć jak pracujesz, ale dla mnie najlepsza będzie trzecia część filmu. Już nie mogę się doczekać!

@wolfparty4234 3 жыл бұрын

I love this channel and your work!!! ❤️❤️❤️🔥🔥💪🏼👍🏻👍🏻🤣

@michaelbartrum4269 3 жыл бұрын

Just discovered your channel a couple of days ago and it is awesome!!!!

@StavrosGakos 3 жыл бұрын

Welcome Michael!

@oneshotme 3 жыл бұрын

I'm back lol As you was marking it out I was lost hahaha Can't wait to see you finish them and know they'll be beautiful tools as always Enjoyed your video and I gave it a Thumbs Up

@mariovergara727 3 жыл бұрын

Gakos, you're a master!

@15reuben 3 жыл бұрын

Thank you Gakos, I don't know if you read my post on instagram or not but I'm glad you used the hand cranked drill press again. I have the same one but have no clue how it should work. I'm slowly repairing it. This helped alot! Thank you very much!

@StavrosGakos 3 жыл бұрын

Hey Reuben! I wrote to you on ig

@JimDockrellWatertone 3 жыл бұрын

Looks like you're in full on production mode. Making a whole bunch of beauties.

@StavrosGakos 3 жыл бұрын

Yup, small bunch ;)

@maciejkicun2948 3 жыл бұрын

Ło Panie, toż to prawdziwa manufaktura już :)

@viorsa8200 3 жыл бұрын

Cómo siempre excelente trabajo , esperando con impaciencia la parte 2/3 ,un saludo cordial y por supuesto un gran like desde Narón, Galicia (España)

@StavrosGakos 3 жыл бұрын

Thank you! Regards:)

@UlisesUlises-xc6wp 3 жыл бұрын

Me encanta su trabajo con las garlopas, usted me inspira Maestro Stavros Gakos. ✨🌳✨🌳

@StavrosGakos 3 жыл бұрын

Thank you :)

@kevinbrauer7635 3 жыл бұрын

IT would be so nice if you make a Video about you're drillpress! I've never seen something like this before but it's a pleasure to See you working with it.

@stanbrackhage 3 жыл бұрын

I could never make 8 like that in row. I would end up making some critical mistake and carrying it through all the pieces and then crying.

@fordboss9275 3 жыл бұрын

Practice makes perfect!

@mr.bigote3129 3 жыл бұрын

Waiting for part 2 and 3 and those plane to be sold or as a gift to a lucky friend???just notice that your making bunch of them...kudos..stay safe..

@StavrosGakos 3 жыл бұрын

Thanks! One pair of them will be for sale, check the description of the video :)

@drawlele 3 жыл бұрын

You know if you count the video where you put the boxwood edging on then you could call this video 2 of 4. I for one can’t wait for the finished products. Love your plane builds

@StavrosGakos 3 жыл бұрын

I take that video as boxing theme :) thanks!

@professor62 3 жыл бұрын

Beautiful, meticulous work, as always, Stavros. I really like your mortise chisel: did you make it yourself? Can’t wait for the next installments!

@StavrosGakos 3 жыл бұрын

Thanks! That was an ordinary chisel with squared sides, i just rebuild it :) i can make a video about it if you want.

@dariuszlitwinczuk4665 3 жыл бұрын

Dobra robota

@StavrosGakos 3 жыл бұрын

Dziękuję!

@scottanderson2581 3 жыл бұрын

👏🏻as always a master at work. Still no finger snap??? Amazing work, I love how you set out your work with the worst looking pencils and pens Still your planes speak for themselves Can’t wait for the next parts then some dovetailed boxing 🥰

@StavrosGakos 3 жыл бұрын

Finger snap works when is rarely used 😉 dovetailed boxing is high on my list 👍 thanks!

@scottanderson2581 3 жыл бұрын

@@StavrosGakos you are right, too much of a good thing is bad. Next time you do I’ll be like ‘yeah whoop whoop’ It makes me smile 😊 Can’t wait on dovetailed boxing...amazing Just started making my own planes, well jointing metal. Managed a dovetailed brass and steel, peened. Next the tongue and groove for the sole Then who knows an infill mitre plane??? I wish you luck my friend, keep making awesome vids

@StavrosGakos 3 жыл бұрын

That's great! Do you have an Instagram account? Good luck!

@scottanderson2581 3 жыл бұрын

@@StavrosGakos ahh just get that, yes I pop into Instagram No I don’t post stuff, well not yet. Been getting lots of support on FB unplugged woodworkers Bill Carter is a member, he’ll give advise when needed.

@StavrosGakos 3 жыл бұрын

I have no Facebook :)

@makenchips 2 жыл бұрын

Question, have you ever considered to using a fine ball point pen to mark out lines?

@StavrosGakos 2 жыл бұрын

Yes, sometimes i use it 👍

@prestigiotablet9118 3 жыл бұрын

👍👍👍

@620cowboy 11 ай бұрын

Hi, I have cut a blank to make these. I thought a one inch blade would be good, but trying to figure out the overall starting dimensions. Could you help me with that please? Thank you in advance

@StavrosGakos 11 ай бұрын

Hi, please write to me on my Instagram profile, i'll send you the drawings.

@italocianci4090 3 жыл бұрын

compliments. what wood is it?

@StavrosGakos 3 жыл бұрын

Thanks! Brech, boxwood and pear

@arkansasboy45 2 жыл бұрын

What is the other piece of wood that makes up the bottom of these blanks and how is that added?

@StavrosGakos 2 жыл бұрын

Hey David, you can find the answer in the video no 046. Cheers

@tonyennis1787 9 ай бұрын

Do you have a recipe that shows which layout jigs to use and in what order?

@StavrosGakos 9 ай бұрын

I showed it in the video 👍

@TheFeuergnom 3 жыл бұрын

the next part will reveal the wonders

@theDugonator 3 жыл бұрын

Do you have any advice for solving issues with plane tracks? Also, love your videos, you’ve inspired me to start making and selling planes myself. I hope to be as talented of a craftsman as you one day. Thanks.

@StavrosGakos 3 жыл бұрын

Hey Ben, thank you :) What kind of plane tracks do you mean? Regards!

@theDugonator 3 жыл бұрын

@@StavrosGakos Thanks for responding. I keep having little grooves on my surfaces created by the corner of the blade. I hope you know what I mean. Even with the lightest cut I can take, I still get these, and the only thing I can do is painstaking plane or scrape them out. I was just wondering if you had any ideas for solutions. Thanks again.

@awldune 3 жыл бұрын

This is a great video and all, but what it REALLY needs is several dozen more timestamps in the description :P What would actually work well is making those timestamps into captions. Many YT channels like this one that don't have narration use captions.

@StavrosGakos 3 жыл бұрын

Thanks, i described everything on the timeline, please read description. Regards!

@nurgle11 3 жыл бұрын

That was a fun watch and can't wait to see the next instalments. Did you make the pig sticker (mortise chisel) at 7:07?

@StavrosGakos 3 жыл бұрын

Thanks Andrew! It was rebuild of an old flat chisel with squared sides :)

@Krzysiek106 3 жыл бұрын

Bardzo fajne oprzyrządowanie stworzyłeś. Czy można już składać zamówienia na strugi ?

@StavrosGakos 3 жыл бұрын

Dzięki Krzysiek! Jakiś czas temu zdecydowałem, że nie będę przyjmować zamówień. Mam zamiar oferować to co zrobię, to umożliwi mi bycie bardziej zorganizowanym :) pozdrowienia!

@JanSzymonGoowacz 3 жыл бұрын

Sztamajza piękna wręcz.

@StavrosGakos 3 жыл бұрын

Dzięki, przerabiałem ze zwykłego dłuta :)

@JanSzymonGoowacz 3 жыл бұрын

@@StavrosGakos właśnie zaintrygował mnie niski kąt ostrzenia. Mam kilka ale dużo większych. Kilka wygrzebałem ze stodoły nieopodal, a jedną całkiem nową ale z lat 70 tych kupiłem na targu z kurczakami, gołębiami i chińską bielizną za całe 10 pln. Ale one wszystkie raczej są ostrzone na ~ 45* a tu masz ze 20 może. Aż korci mnie przeostrzyć którąś tak nisko, bo szczerze to nigdy nimi nic nie zrobiłem, bo kultura pracy żadna.

@StavrosGakos 3 жыл бұрын

@@JanSzymonGoowacz to było zwykłe dłuto płaskie, odcinałem nowy kąt po rozhartowaniu, na Instagramie znajdziesz post z realizacji 👍

@thepigmeat9553 2 жыл бұрын

How long did making these dovetail planes take from beginning to end?

@StavrosGakos 2 жыл бұрын

About 4 months of my free time

@nathanleroux6509 2 жыл бұрын

hello, where do you get your irons for your planes ?

@StavrosGakos 2 жыл бұрын

Hey, for this project i bought some NCV1 steel and my buddy cutted the raw shape on cnc

@nathanleroux6509 2 жыл бұрын

@@StavrosGakos thank you, do you have any advises for what steel to choose and where to get them ?

@StavrosGakos 2 жыл бұрын

It depends what kind of steel CNC can cut (it is calibrated for each steel to get good results). First ask what kind of steel they can cut, later find it. Better option can be watercutting but it would be more expensive. Almost every knifemaking shop have few kinds of steel wich can be used for plane blade. Cheers!

@harryspier865 Жыл бұрын

What kind of wood do you use for this plane

@StavrosGakos Жыл бұрын

Beech, pear and boxwood

@michabiaochleb1188 3 жыл бұрын

Z jakiej stali noże? Sam będziesz hartował? Robota jak zwykle... MISTRZOWSKA!

@StavrosGakos 3 жыл бұрын

Dzięki Michał! NCV1

@jaydwy8069 3 жыл бұрын

This is awesome. Wonder how this guy learned to make planes?

@StavrosGakos 3 жыл бұрын

Thanks Jay! I learned it during building planes 😁

@jaydwy8069 3 жыл бұрын

@@StavrosGakos lol nice

@matteocerantola1079 4 ай бұрын

Hello! What are the dimensions of the plane body? And the bed angle?

@StavrosGakos 4 ай бұрын

Hey, about 240/85/20, 50deg

@matteocerantola1079 4 ай бұрын

@@StavrosGakos Thank you!!!

@vincentnikonchuk4776 4 ай бұрын

Are these planes for sale?

@StavrosGakos 4 ай бұрын

Hey Vincent, please write me an email esortodox @ gmail . com

@anrigagiev6302 2 жыл бұрын

🤚👐💎💥💪👍👍👍👍👍👍👍

@oneshotme 3 жыл бұрын

I guess I missed the first one so be right back lol

@irvinwittmeier5208 3 жыл бұрын

!;-)

@tayyabsafdar7069 2 жыл бұрын

Why so many?

@StavrosGakos 2 жыл бұрын

One pair for me, one for a gift, one for sale and three for my friends 🍻

@tayyabsafdar7069 2 жыл бұрын

@@StavrosGakos lovely 💡idea. I had this type, used them once or twice but seeing you making them has given me the full utility knowledge of them, hopefully I also make one first and then the other. Regards.