Thank You. Thank You.. Thank You!!!! For making this video and for being Blessed!! Was stranded in NYC last night at 3 a.m. ... Watched the video..Found a Garage to borrow tools.... and BAM..... My car started and I was able to get home.... Thank You so Much for Posting this.... I was able to drive 2 hrs home and get my 9 year old to his football game this morning...You are the BEST!!

DUDE!! I owe you big time!!! My 09 Altima froze up on me, I tried your fix, and with a few tries I did it!!! Decided to just remove that lil black button, as the spring in it kept making the part flimsy. Also, had to remove the mother board thingy to get to the gear wheel. it was jammed, and stuck in lock. I removed the little motor thing (easy) turned the gear wheel until it was unlocked, put it back in making sure that the little motor part was fit into the gear grooves properly. I was unable to put the top back on since I jacked it up trying to get the damn thing open. I put the $950.00 (what they were going to charge me for the part) part back in its place after it started over and over. I did this two weeks ago, and it's still starting every time. Also the steering wheel still locks! The key light stays lit but I dont care. It starts!! It cost me 3-4 hours of labor and it did jack up my fresh nail polish but I can now drive to get a manni, so was well worth it! MUAH!!!

You ARE FANTASTIC THANK YOU My MAN I had to manually turn the while wheel at the same time as gold wheel on the side to get the lock down! Press the black button like u said and it turns on! 2009 altima!

thank you so much. I was stranded at work and read about what it was. I was so stressed out when I found out how much it was but thanks to this video we tried it and it worked and saved us money!

I fixed my car with this video, it was really helpful and to others that might be questioning it, it works 100%, thank you

on God u the mechanic of the year salute

Thank you from Russia!!! You the best!!!

Good looks on this video!My shit sitting in my driveway now and just got off the phone with these clowns and told me the same thing about some damn 1,200.

There's a steering lock bypass module for altimas and maximas and 370z on ebay and it works. plug it in and go. no programming, no tools, no catch

THANK U SOOOO MUUUCH BRO U JUST SAVED ME 1000$ THXXX MAN U THE BEST BROOOOOO:) IM SO HAPPY

Last Wednesday I tried the push down method with a screw to hold the one inch block. That did not work after two days. I replace the fuse and open the case to push the smaller switch today. I will drive the car and check again in three days. Ken

Man, I love you. Thank you for help.

You gotta file a complaint with NHTSA so this part can be recalled , towed and fixed for free!! if enough people complain NISSAN has to deal with it. My car is used and the previous owner replaced this same part and now it's broke AGAIN!!! Not cool-- look it up and file a complaint -- NHTSA AND WITH NISSAN!!!

I dont have actuator under mines and that cord is no where under mines what should i do ?

How do you take off the steering lock module box from the bottom of the steering wheel? I pulled down on it but it doesn't budge. Is it attached to screws or something?

Hey I got a question what if I got the car accessories to cut on and I pull fuse and the car is not starting what do you think will be the problem?

ma brother, awesome video fam! one question tho, how the hell do i unscrew them side bolts/screws that securing this piece in place? cant seem to find a tool that can pop em out

how do you remove it from the steering column?

If your lock does not push down u camn twist the white wheel and the gold small screw on the side to get the lock down!

I have a car like this that has this issue but my problem is. I have a new box but I cant find the cords that plug into the box. I have taken the dash apart and unraveled the tape to see if the wires had been cut and I cannot find that plug for nothing in this world. 2010 altima

my pro you're very good at this. ...but I have problem in 2 scrolls, it's jam I can't open it.

you are THE MAN

What did you use to pry it open, I'm having no luck.

thanks my pro... I will arrange something to Open it white. any update I will inform you.

thanks it works

Bro did you have to put it back into that lock thing or do you just let it hang?

yes sir. I'm talking about the 2 scrolls ..

I'm thinking about the first 2 scrolls to remove it from the sterin.

I gave Nissan $975 for this part it cost $600 for the part. it took them less than 10mins. I say buy it from a salvage yard and replace the 3bolts and ride

I ordered a harness that has the brown wire cut imma see if I can start it like that if not I'm opening up that sucka and pushing that shit back hopefully it works

once you do this does the car start every time or will it give you an issue again?

How did you get your key to work mine isn’t?

Thank u soo much you dave me $1200 god bless u son....

how do you take off the box??????

Thanks! I'm gonna have to have someone help me try this

do you put the box back in or where do you put it?

it's taking me a while to get this thing open hope I don't damage it

I need your help im clueless

Man I can't seem to get the part to unscrew what tool did u use to unscrew it

man trynna find out if u still have pro pumps

Is this a quick fix only

how do you take that box off ?

that red light is your alarm system its normal

thanks bro u saved my ass!!

how you open it?

cwt and now this. never buying another nissan

how to take This part a loose

My car has this problem now

altima 2010

my car is alt image 2010