1/24 Lamborghini Diablo full build. Italeri 3685

Рет қаралды 43,814

Күн бұрын

Hi, for those who want to see the complete assembly of Lamborghini Diablo without separate episodes, I did all the steps in one video. Enjoy watching! If you like it, like and subscribe to the channel.
In social networks, you can find me here:
Facebook / scaleautoshop
Instagram / scaleautoshop
Vkontakte scaleautoshop
my scale modeling pages:
ongoing projects www.scalemates.com/profiles/m...
projects on the shelf www.scalemates.com/profiles/m...

Пікірлер: 49

@davidhinkson8856 3 жыл бұрын

Reminds me of the Testors/Bburago Diablo I built in the early 1990s, yellow diecast body, flocked interior, opening doors and bonnet. Loved that model, and always liked the more subdued look of the Diablo compared to the later Countach models and everything that came afterwards.

@Scaleautoshop 3 жыл бұрын

agreed, Diablo has own charm forever, that is hard to replicate.

@robinsmodels 2 жыл бұрын

thanks for sharing

@Scaleautoshop Жыл бұрын

Thanks for watching!

@kyleSD70MAC 4 жыл бұрын

I love the color you picked for it! That nice metallic red.

@Scaleautoshop 4 жыл бұрын

My wife think so too 😀

@ZiggysDesk 4 жыл бұрын

Great build! came together nicely 👍🏻👍🏻

@Scaleautoshop 4 жыл бұрын

thanks a lot :)

@cameronholmes7483 4 жыл бұрын

That was one beautifully crafted car from a kit. Keep up the great work.

@Scaleautoshop 4 жыл бұрын

Thanks a bunch!

@pius222 4 жыл бұрын

great build, have the same kit, glad I saw this vid in the event I am going to build it.

@Scaleautoshop 4 жыл бұрын

Have fun with this kit ✌

@rarejer 4 жыл бұрын

Sigh! Another stunner! Your work is very good!

@Scaleautoshop 4 жыл бұрын

Thank you so much 😀

@jean-rogerleyris3506 4 жыл бұрын

sublime !!

@Scaleautoshop 4 жыл бұрын

thanks :)

@dmitryobolonskiy2854 4 жыл бұрын

sehr gut!

@Scaleautoshop 4 жыл бұрын

Danke!

@keithsmodelsandrcs6593 4 жыл бұрын

Awsome bro perfection 👍😍

@Scaleautoshop 4 жыл бұрын

Thank you so much 😀

@gamer197730 4 жыл бұрын

Great job, man! I’ll subscribe for more!

@Scaleautoshop 4 жыл бұрын

thanks for subscribing ヾ(•ω•`)o

@jamieroseman4429 4 жыл бұрын

Of call your builds so far this one has impressed me the most. Your masking skills are amazing. I know this is an older kit too so the engineering isn't all that great. You had to fix a lot of things.

@Scaleautoshop 4 жыл бұрын

Thank you for watching my builds😊 I am constantly learning. I hope that the next Audi R8 LMS also comes out great.

@shaunswesey5179 4 жыл бұрын

Oh yea also what did you use on the panel lines? Which panel line scriber do you reccomend? Thank you! Grate build!

@Scaleautoshop 4 жыл бұрын

in my case tamiya panel liner black, you can also use enamel paint diluted with turpentine or white-spirit (AK has odourless thinner). I tested a lot of scribers, all of them mostly fit (blade thickness up to 0,2mm gives 5mm in 1:1 scale)

@shaunswesey5179 4 жыл бұрын

Thank you for your Reply!

@shaunswesey5179 4 жыл бұрын

Hey oky so good so far! What grade sandpaper u using to sand your putty down? Thank you

@Scaleautoshop 4 жыл бұрын

Usually i use 400 then 800, but if you apply then primer microfiller (mr surfacer 500 for example), is enough 400 because microfiller gives about 500-600 roughness.

@emiliolopez2814 2 жыл бұрын

Amazing, how long did it take you? I found one of this on my dad's old stuff

@Scaleautoshop 2 жыл бұрын

thanks, may be 40 hours + -

@kirandc24 4 жыл бұрын

Great build pls make a agera rs............

@Scaleautoshop 4 жыл бұрын

thanks! i did not hear about this kit. which manufacturer made that kit ?

@kirandc24 4 жыл бұрын

@@Scaleautoshop I believe frontiart

@FS-wl6uo 4 жыл бұрын

Hey mate what are the brand of your mesh used and where can I find then? Would be nice if you put your tools used in the description. Nice build, i’m building one of these on my own, lots of gaps and issues to fix! Not an easy kit, bit beautiful model after all!

@Scaleautoshop 4 жыл бұрын

yes, that was not an easy kit, lot of issues. I did not right understand which mesh you meant ? for flocking? tea infuser

@FS-wl6uo 4 жыл бұрын

Scaleauto shop sorry, its the micro mesh you used to polish, the abrasive fine pads (before using the compounds)...

@derekburnett2728 4 жыл бұрын

Okay, awesome looking build. However, at 5:09 in the video you taped the entire body so you could shoot your black trim. If I had done that it would’ve left tape marks all over it. What do you do to keep that from happening? Dry time, mix ratio, etc? That is one area where I am struggling. The only time it doesn’t happen is if I use a three part clear. Anytime I’ve used a single stage clear like that is when I get into trouble. There’s got to be a step I’m missing.

@Scaleautoshop 4 жыл бұрын

It depends on the type of coating. from my experience: If it's 2K clearcoat, mr hobby clear, tamiya LP clear - ok (of course wait a day) If it is a lacquer paint (like tamiya LP, mr color) - ok If it is an acrylic matt - still ok If it is acrylic gloss or enamel - not ok

@derekburnett2728 4 жыл бұрын

Scaleauto shop Maybe I’ll give a few more days and see what happens.