1/35 Copper State Erhardt E-V/4 M.1917

1/35 Copper State Erhardt E-V/4 M.1917 | Full Build

Рет қаралды 29,560

LPJ Models

9 ай бұрын

In this video I build the excellent Copper State Models Erhardt in 1/35
www.vms-supplies.com
www.copperstatemodels.com

Пікірлер: 140

@lpjmodels 9 ай бұрын

I hope you liked the vid

@Skyraider3D 9 ай бұрын

Absolutely nailed it James! Beautiful work. I'm a 1/48 airplane modeller and I am tempted by this kit now! Very cool.

@SprueFascinationChannel 9 ай бұрын

Lovely videography , workflow and final result, James 👍

@MarcGray1990 3 ай бұрын

Now that is how you paint and weather a model! Fantastic build mate! Absolute quality! Love the video and keep it up!

@ModeliteDiorama 3 ай бұрын

just stumbled across your copper state ww1 model videos again and absolutely love them! great references for my ideas!

@davidcole333 5 ай бұрын

I think a bit more rust around the rivets would have been appropriate and I think the kit needs an engine and a figure or two. You did a BEAUTIFUL job with the paint. I love your black basing technique.

@lpjmodels 5 ай бұрын

Thanks David ! I'm a big fan of black basing too. I dont often add a base and figures but I am for the next build. Sometimes the vehicle is enough for me before the next project 😆 I bet these rusted a lot more, like you said, a bit more wouldn't have hurt. Many thanks 😊

@StaplesandVine 9 ай бұрын

A fantastic build as ever. It would look great as a diorama with a couple of figures.... 🤔

@lpjmodels 9 ай бұрын

thanks so much @staplesandvine !

@sjaakvandervrande9414 9 ай бұрын

Amazing 👍👍👍

@lpjmodels 9 ай бұрын

thanks a lot ! :)

@danmeehan1390 8 ай бұрын

Nice choice of vehicle. Great work.

@user-sw9yd1dn7g 9 ай бұрын

Your paintwork is excelent Sir

@user-xk4lh9xl7i 9 ай бұрын

Great build mate! Thank you for sharing your techniques!👍🏾

@lpjmodels 9 ай бұрын

My pleasure!

@alexviktor7975 9 ай бұрын

Hello from Latvija!

@lpjmodels 9 ай бұрын

hi Alex!

@alexviktor7975 9 ай бұрын

@@lpjmodels A Great armor car comes out. I am to like Copperstate models. They have good models from the First World War. But you have great skills in painting. Have old are you made models?

@DutchDaveModels 9 ай бұрын

Nice niche model from CSM. I think they are really the replacement of former WNW in most parts. An engine would have been nice, but this probably will be supplied by aftermarket producers. Excellent build again James. Keep up the good work ✨👍✨

@lpjmodels 9 ай бұрын

Thanks Dutch Dave ! I agree. I have the caudron in the stash and it looks amazing. A bit daunting though 😀

@chris_obarski 9 ай бұрын

Best copper state armoured car builds out there! Thanks a lot James for this fun to watch video!

@lpjmodels 9 ай бұрын

Thanks a lot Chris ! Much appreciated 🙏

@sd7212 8 ай бұрын

Amazing! I really missed your builds :)

@robertbienkowski 9 ай бұрын

Great work!

@lpjmodels 9 ай бұрын

Thanks Robert

@Havco980 9 ай бұрын

Love the way the gril turned out

@lpjmodels 9 ай бұрын

Thanks ! The 3d part was a good balance of detail and finesse

@RB55able 9 ай бұрын

A beautiful build. I love all the shades of gray you incorporate. Your video work is also well executed. Very inspiring. Thank you for sharing.

@robbo1068 9 ай бұрын

Another amazing build, James....I wouldn't change one solitary thing.....it's beautifully detailed by your painting and weathering. Always a pleasure watching your work and the wait was definitely worth it.

@lpjmodels 9 ай бұрын

Thanks Robbo I'm glad you enjoyed the build 😀

@harryhamilton298 9 ай бұрын

Outstanding build.

@basfinnis 9 ай бұрын

Another beautiful finish. Lovely stuff 😉

@runehau1 9 ай бұрын

Really enjoyed this one.

@lpjmodels 9 ай бұрын

Glad to hear!

@jbw3118 9 ай бұрын

Beautiful work, love the modulation.

@lpjmodels 9 ай бұрын

Thanks a lot!

@nt_scale_studio 9 ай бұрын

Looks amazing!!

@lpjmodels 9 ай бұрын

Many thanks !

@VintageSprue Ай бұрын

Absolutely beautiful ❤

@lpjmodels 29 күн бұрын

Thank you! 😊

@Marshal976 9 ай бұрын

Looks great mate, well done!!

@lpjmodels 9 ай бұрын

Thanks a lot!

@tpaul802 9 ай бұрын

As usual, incredible job.

@lpjmodels 9 ай бұрын

Many thanks 😊

@SMAZVidoes 9 ай бұрын

Great build. The painted vehicle name looks more realistic than decal. This machine seems to the ancestor to the similar looking modern day armored vehicles.

@mmartinu327 9 ай бұрын

It looks like MRAP, tall and blocky.

@lpjmodels 9 ай бұрын

Thankyou ! I agree

@PGNogueira 9 ай бұрын

Excellent as always.

@lpjmodels 9 ай бұрын

Thanks again!

@davidnash1220 9 ай бұрын

That is super cool brilliant finish and a great subject 👍

@lpjmodels 9 ай бұрын

Thanks a lot David

@scale_history5584 9 ай бұрын

You do such amazing work on these CSM vehicles!

@lpjmodels 9 ай бұрын

Glad you like them!

@ferbieticklater7429 9 ай бұрын

Nice one James. As always a great job!

@lpjmodels 9 ай бұрын

Thanks Ferbie !

@lesthiele4921 9 ай бұрын

That was a totally excellent build, as others have said your presentation style is perfect, bext regards from a Kiwi living in Australia 👌👍👌👍

@lpjmodels 9 ай бұрын

Thanks Les !

@MrKersey 9 ай бұрын

Great presentation of your modelling skills, well done!

@lpjmodels 9 ай бұрын

Thanks a lot !

@scale_jelly_lydon5813 9 ай бұрын

Fantastic video and a great finish to the kit.👍

@lpjmodels 9 ай бұрын

Thank you! Cheers!

@jorgemorfinstoopen 9 ай бұрын

Congrats! This process will be very helpful for my next project.

@lpjmodels 9 ай бұрын

Thankyou and good luck !

@brockbeckstedt6483 3 ай бұрын

Brilliant!

@richardehrhart6744 9 ай бұрын

Great build! Love the name of it. Gotta get me one!

@lpjmodels 9 ай бұрын

You should!

@ScaleHangar182 9 ай бұрын

Really nice build.

@lpjmodels 9 ай бұрын

Thanks @scalehangar182 much appreciated

@danteogilery7948 9 ай бұрын

Great result 👏

@lpjmodels 9 ай бұрын

Thank you!

@robertlucic7598 9 ай бұрын

Fantastic James. I have this kit in my stash and am moving it to the front of the queue. Thanks for the inspiration.

@lpjmodels 9 ай бұрын

Hope you enjoy it!

@ModelMinutes 9 ай бұрын

Nice to see those exension tubes are helping get those close ups! That Phot-etch looks crazy! Another awesome build bro! :D

@lpjmodels 9 ай бұрын

Thanks mate ! I'll have to start giving you a video credit for getting onto those things 😀

@jessejones640 9 ай бұрын

Great job!

@lpjmodels 9 ай бұрын

Thanks!

@laghelach2654 8 ай бұрын

Comme d'habitude un véritable travail d'artiste... BRAVO !!!

@lpjmodels 7 ай бұрын

Merci !

@sergiovasconcellosocriativo 9 ай бұрын

Amazing job! Thanks for share. Cheers

@lpjmodels 9 ай бұрын

Many thanks!

@simonleach6632 9 ай бұрын

This is yet another beautiful build, looks amazing mate, properly nice job, especially painting those decals on! I'm really tempted to try one of these copper state armoured cars now, every single one you've built on this channel look like awesome kits!

@lpjmodels 9 ай бұрын

Thanks Simon, they are great kits, plenty to choose from now too

@jonhking5570 9 ай бұрын

Nice to see a nother model from you James looking forward to seeing some more very soon you should but this one on a simple Sean

@lpjmodels 9 ай бұрын

Thanks John, I'll see if I can get round to it !

@wadejustanamerican1201 9 ай бұрын

Nice build!

@lpjmodels 9 ай бұрын

Cheers Wade ! 🍺

@guaporeturns9472 8 ай бұрын

You are definitely a skilled model builder

@lpjmodels 7 ай бұрын

Thankyou ! I try my best

@truthhurts9241 5 ай бұрын

Hi James, have to say, that is another beautiful model, thanks for sharing it with us. In return I'll give you a little titter. I was avidly watching you painting but thought there was something slightly askew with the model, couldn't put my finger on it. It wasn't until you were putting the decals on that I realised it doesn't have "Normal" tyres on it. I think I had a small "senior moment."

@ModellingWeekly 9 ай бұрын

Absolutely gorgeous work mate :)

@lpjmodels 9 ай бұрын

Thanks Mr Weekly !

@ModelkitStuff 9 ай бұрын

I love CSM kits and you can certainly bring the best out of them, nice job.

@lpjmodels 9 ай бұрын

Thanks mate !

@hhyling8483 9 ай бұрын

really nice model and paint job!

@lpjmodels 9 ай бұрын

Thank you! Cheers!

@tomsstuff7636 9 ай бұрын

Great to see those more "esoteric" armoured cars built in such high quality! Having had the chance to see a somewhat similar (though later) Daimler DZVR 21 in person at a German museum those nearly steampunk aesthetics did leave quite an impression in 1:1 scale as well 👍

@lpjmodels 9 ай бұрын

Thanks Tom. I had to Google it and its a total unit ! Love to see it in person

@jimsminimodelsmccrea 9 ай бұрын

really enjoyable video, especially the weathering nice one.

@lpjmodels 9 ай бұрын

Thank you so much 😀

@marcingalezowski2880 9 ай бұрын

Nice, I really like what you doing.

@lpjmodels 9 ай бұрын

Thankyou !

@jonfoisy1237 9 ай бұрын

I think your hand painted markings look better than the decals. More realistic.

@lpjmodels 9 ай бұрын

Thanks, I was a little worried about it

@jonfoisy1237 9 ай бұрын

@lpjmodels No worries James. Whenever possible I hand paint or ab markings using masks. Not a big fan of decals although sometimes they're necessary

@oldschoolbiker9768 9 ай бұрын

Perfect 👍

@lpjmodels 9 ай бұрын

Thank you! Cheers!

@htc4898 9 ай бұрын

Thank you.

@lpjmodels 9 ай бұрын

You're welcome!

@TheUncleRuckus 9 ай бұрын

This is a super cool build but I'm disappointed there was no engine supplied with the kit, especially since finding a period correct engine somewhere else is going to difficult. It just seems odd to have such a detailed hood/bonnet with all those hatches that could be posed open that there's no engine, seems like if they wanted to go that route it would've been easier to mold the hood with nonfunctional hatches. I like the hand painted lettering on the hood better than the decal tbh, looks more authentic to me. 👍👍

@lpjmodels 9 ай бұрын

I understand, as a lazy modeller I don't mind but I can see why it would be annoying. I think also less plastic kept the price down

@roadweary5252 9 ай бұрын

A little late to the party but it came out amazing! Well done

@allanrichards3752 9 ай бұрын

A very nice build and I really like the modulation on the grey paint. CSM do some very good models

@lpjmodels 9 ай бұрын

Thanks Allan , it came out ok. It's a little more subtle in person but that works welln

@rorogaulois5700 5 ай бұрын

You and a csM kit it s a wonderful moment in video.I’m fan of your work.But I m angry at you.Because of you I want to buy all the CSM kitseven if I would never have your talent 😊 thanks sir for the great pleausure moment when I see your videos

@lpjmodels 4 ай бұрын

Thanks @rorogaulois7500 thays very kind, remember the finished build is only part of the journey 😀

@saburu79666 9 ай бұрын

✌🏼😎👍🏼

@lpjmodels 9 ай бұрын

hi Sy !

@adrianrichards247 5 ай бұрын

Based on the Lancaster that I purchased from CS and followed your build ….and though I say it myself did a more than half descent job …I have now purchased this one ……..so based on the past one …see you sometime in May / June …..seriously though great modelling …..are you going to do one of the CS first WW planes with the struts and wires …hope so

@AgentHKG 7 ай бұрын

❤❤❤👍🏻👍🏻👍🏻

@alxandorbond3399 9 ай бұрын

Ждем'с

@lpjmodels 9 ай бұрын

hope you enjoyed it !

@kiwiruna9077 9 ай бұрын

Hi James, I like what you have done there, I wish we could get Copper State kits' at a price that include costing me a kidney and it is good to know I'm not the only one with sausage fingers🤨.

@lpjmodels 9 ай бұрын

That's a shame, here most are about £30‐40

@user-zw7gp8xb8f 9 ай бұрын

🤝🎥👍

@derekparnell3574 8 ай бұрын

awesome looking kit, and as normal a cracking build. When is this one out? And you talk about sausage fingers try the same with oldman hands lol.

@lpjmodels 7 ай бұрын

Thanks Del ! I find myself with shaky hands lately. Not good ... it should be out now ish !

@johntreloar8203 9 ай бұрын

Nice work James, it looks great, needs a diorama base?

@lpjmodels 9 ай бұрын

Thanks John. I'll think about it. With low mojo it's hard to stick with one thing atm 😀

@johntreloar8203 9 ай бұрын

@@lpjmodels Hang in there James, we all go through it, just keep at it and you'll be fine.

@warbirdgamer 9 ай бұрын

Can we see some modern jets maybe in a dogfight diorama

@lpjmodels 9 ай бұрын

I dont have a lot of modern in the stash. I'm overdue doing one though

@mmartinu327 9 ай бұрын

It looks like current MRAP, tall and blocky.

@lpjmodels 9 ай бұрын

I agree, it's like we've come full circle

@waardlafrance110 9 ай бұрын

@user-me1ef8ym1c 9 ай бұрын

I think I might be going a bit crazy but I have looked at this video on two monitors and my phone and can't seem to figure out how green the model is. Does it look quite green in person or would you say its more overall grey ?

@lpjmodels 9 ай бұрын

It's roughly RAL 7010 as a mid tone , it sits inbetween panzer grey and field grey ( like the tamiya shade ). I used a colour picker app from a screenshot to get a rough idea from a photo I know represents the colour well.

@user-me1ef8ym1c 9 ай бұрын

@lpjmodels Thanks for the reply. The model looks great 👍