1/76 RC Drift Nissan Skyline GTR R34 by Turbo Racing C64 radio control toy car

Рет қаралды 59,689

Күн бұрын

This is an older design with no metal weight behind the front bumper. The chassis is not balanced evenly so I could never get this to drift well but I see others drift well with the metal weighted ones.
#drift #rc #skyline

Пікірлер: 48

@traviswalker8933 2 жыл бұрын

The thumbnail made me think it was a video game lol

@marinoriccobono8831 10 ай бұрын

I think its because the grooves in the wood that cause the gryo to trip out. It needs a smoother service. I love this video man. I bought one on ebay the ( C75 ) because of your video. I can't wait to drive this... especially because of my two cats.. they will go nuts

@smallmodelcollector 10 ай бұрын

Thanks. I find it best to vacuum before running because the cat hair will get in the axles.

@playstuff5782 2 жыл бұрын

You defiantely need to tune/adjust controller settings for different surfaces. It also takes practice and requires good controller throttle and steering dicipline to drift well.

@playstuff5782 2 жыл бұрын

I have both colors. If you take the time to tune, find a good surface, use slight controler adjustments .. these are awesome! Takes practice to drift consistantly and nicely but high reward once you get it down!

@smallmodelcollector 2 жыл бұрын

Do you find it turns easier in one direction? I think the left right balace might not be even.

@ANDREWF891 Жыл бұрын

@@smallmodelcollector might be one wheel drive?

@mikesmith42069 Жыл бұрын

@@smallmodelcollector that can happen when one wheel gets more gunked up than the other, causing a friction imbalance

@thomasmartin5182 Жыл бұрын

i'm really interested in buying one/some of these. Do you happen to know the range of these things? I'm thinking about buy some for my nephews. Also, if you have more than one car going at the same time, are there any issues with regard to frequency/reception between car and control? Basically, do they 'cancel eachother out' and none of them work? Thanks

@x_x19xx Жыл бұрын

@@smallmodelcollectorhi just want to put my 2 cents out there. Have the very same one and that happens because it's still in factory tuning. You can either tighten or loosen the front wheel screws to get that whipping drift effect. Quite iffy to tune though but very fun once fully calibrated

@neil7930 Жыл бұрын

Buy a plastic race mat, is best surface to use these on. Also can adjust the steering with the screw located next to the wheel, make sure both wheels are on the ground when you turn, can adjust with screws next to wheel.

@evanmeneilley3228 9 ай бұрын

So much for the box art 😂

@cuttlefishpie3731 Жыл бұрын

Try taping some flattenned out lead fishing weights

@Sleazzy559 Жыл бұрын

That’s shits hard but u should take the counter steering off and try to do a drift track that would be a coo possibly funny and good learning video 🙏😂

@bwest6275 Жыл бұрын

I think the balance of the car is problematic. Perhaps you can try adding some weight and shifting it around the chassis to see how it helps or not.

@mikesmith42069 Жыл бұрын

the cars are perfectly tuned and balanced out of the box, but you eventually pick up dust and hair in the wheel axles, which alters the turning balance

@johndel3500 Жыл бұрын

LMAO NOT THE ANT 23:55

@jeancarlosvaldezgomez8260 5 ай бұрын

I have a question, does it only drift on glass or it drift in some matirials like wood, etc. if you now can you make a list of some of them pls.

@zeldadiecastracing 2 жыл бұрын

Very nice bro

@jspeedrc Жыл бұрын

Cool 😎 👍🏽

@GonzaloMenta28 Жыл бұрын

Hello, How are you? how many Drift cars can I have driving at the same time. for example 4x C61 or 1x C61 1x C62 1xC63 and 1xC64? Each of them with their own controller

@jp7g229 Жыл бұрын

Throttle control is very important for drifing. There are couple of videos teaching you how to adjust the turning if one side is better..

@RCmadness888 Жыл бұрын

turn signals would ruin it, who the frog signals while drifting....at best, put hazards on, that would be nicer.

@rileyvosper411 Жыл бұрын

Where can I buy one?

@danielconwell3419 Жыл бұрын

does the regular tired help it drift better or does the brass one help more?

@ronaldovillafuertecordova2911 Жыл бұрын

Hi, where did you buy it? Please, I want to get one

@Lloyd_workshop Жыл бұрын

Is there anyway to replace the tires

@glockybalboa600 Жыл бұрын

How long did delivery take

@DanhNguyenster64 Жыл бұрын

If u use a diecast body maybe itll drift better? More weight

@smallmodelcollector Жыл бұрын

That's an interesting idea. Maybe I'll try it someday.

@FPSWildlifeAngler 10 ай бұрын

where did you get it ?

@mikesmith42069 Жыл бұрын

had to return mine, hair kept getting clogged in the front axles which ruined the performance, and I couldn't take them apart enough to clean it out. shame because they would've otherwise been perfect for drifting inside on our hard floors. if Turbo Racing fixes this flaw I'll buy another one in a heartbeat.