1/7th Scale Super 7 Mad Beast Electric Powered Monster Truck Overview

Рет қаралды 60,405

8 жыл бұрын

www.nitrorcx.com/03c60-madbeas...
The new Super7 MadBeast is Exceed RC’s newest monster truck and it is bigger and badder than ever. The new Super7 continues the lineage of the MadBeast line of trucks. A line known for its superb durability, reliability, and outright monsterous power. This new variation comes fully equipped with a revamped brushless powertrain and an improved chassis and suspension design. This new rugged design features improved performance and durability to maximized raw bashing power. The Super 7 is here and lives true to the saying "bigger is always better".
The new MadBeast EP features a rugged 540L brushless motor rated at 2400kv and a 100-amp XeRun programmable waterproof ESC. This new motor is shielded by an huge heat sink to safely allow maximum torque potential. This massive monster truck is powered by dual 7.4v 3300mAh LiPo batteries wired in series to generate a peak 16.8v of power. The MadBeast is equipped with anodized aluminum chassis plates and roll bar giving this 1/7 scale monster a super strong frame. Dual aluminum shocks with threaded collars and oil filled can be found on all 4 corners of the MadBeast EP to ensure that no terrain is too rough for this beast of a truck. The new slipper clutch design implemented on this truck protects the gears from the abuse of rough jumping and throttle smashing. The spur gear is heat treated aluminum to take a beating from high voltage power. This awesome new platform rides on huge wheels and custom low profile tires with extreme all-terrain tread. This wheel and tire combination gives the best of both worlds. High ground clearance and performance handling is the name of the game. The MadBeast Super7 is fully-loaded with upgrades to handle anything you can throw at it and is sure to be the king of the electric monster truck class.

Пікірлер: 96

@roynelson7613 8 жыл бұрын

that was one hell of a review really like that man awesome job bro I got to check this bad boy out

@mikealexis 8 жыл бұрын

Something about the body and chassis does not look right...my two cents..

@wouldstock1 8 жыл бұрын

This does look promising. I've made some mods to my 1/8th scale mad beast and so far she's been holding up rather well on 6S. I'm curious if the front skid plate from this with all the steering servo saver components will fit on the 1/8th scale Mad Beast. The servo horn/saver combo that comes on the original is absolutely horrible. If anyone can chime in on this, it would be helpful!

@hirevinrs4 6 жыл бұрын

I own the mad beast ep 1/8th scale ... Is it possible to order the esc and motor off this kit for my mad beast?

@bachoyboy 7 жыл бұрын

will exceed rc ever make a taller monster truck tire for this truck? would be nice. i like the compound it ses now. soft. would look more scale if a little bit taller. thx.

@ravenlorans 8 жыл бұрын

Compatible with the HPI Savage 1/5 Scale Conversion Kit? When are you coming out with your own 1/5 Scale Conversion Kit for the HPI Savage? (asked Several months back)

@KevinMillard68 8 жыл бұрын

nice truck id like to put it to the test

@brianhilligoss 8 жыл бұрын

why a 10th scale motor in a 7th scale truck makes no sense.

@DocWolph 8 жыл бұрын

+brian hilligoss Seems to work well, even on 4s. Good starter motor system for something that big.

@tYpHoNrc 8 жыл бұрын

its a knockoff savage with kershaw motor mount and large rustler vxl wheels lol

@Nlangkirby135 6 жыл бұрын

Will this be restocked soon or is it discontinued? Jus curious.

@ravenlorans 8 жыл бұрын

Why are the 1/5 Scale SC's out of Stock all the time? Do they sell that well or did you discontinue them? Still Waiting for the 1/5 EP Monster Truck so why did you only go 1/7th?

@tomaswolsink7620 8 жыл бұрын

that's a awsome truck what is the top speed on this thing??

@elfocker 8 жыл бұрын

That shell looks like a tmaxx 1.5. Rear wheels are past the shell. What's up with that?

@yagzcanucuncu8772 8 жыл бұрын

look like savage xl

@philliplyn6487 7 жыл бұрын

Nice truck how much is it going for and the speed can accept Lipo with six app

@xplosive_rc5516 8 жыл бұрын

The video you guys made doesn't do this justice!! But the motor is way too small for 1/7. And it should take 6s, the stakes are high now

@julianschmidt9951 8 жыл бұрын

+Xplosive_RC Yes, this motor is way too small :O

@timmydix 8 жыл бұрын

And the tires look like proline trenchers

@xplosive_rc5516 8 жыл бұрын

+Timmy Dix yes I've noticed. It's not always the tread that makes a tire but the materials and how sticky they are. How hard can it be to make a new tread. Also the body is going to suck to find a new one, in 1/7th scale.

@ravenlorans 8 жыл бұрын

+Xplosive_RC At $500 I Agree but they are "trying" to keep the costs down. It's enough to get you up and running tho. Granted a 180amp set up and a 750plus size motor would have been 100 times better but at what cost?

@xplosive_rc5516 8 жыл бұрын

+ravenlorans these Chinese manufacturing companies can make it larger with minimal cost difference, they already are reusing the same parts mostly

@Madtown_66 7 жыл бұрын

yes I agree their parts are always out I guess I'm going to have to find someone else to buy future vehicles from. PS can anyone help me find someone 1/7 scale mad Beast body mount post of course they are out of stock if you can help please send me a link please sorry did not proofread this

@DocWolph 8 жыл бұрын

I REALLY hope that most RC body makers are quick to make some good alternatives. The body is a weird unlicensed Ford Raptor and it just looks wrong. But everything else looks promising.

@wesley30534 5 жыл бұрын

Did the take that from the savage

@Madtown_66 7 жыл бұрын

first and foremost yes I agree with most of the comments. any suggestions on upgrades if anyone can help please let me know thank you I would appreciate it

@aksummit9072 8 жыл бұрын

Why are most things sold out on nitrorcx.com

@ramrod126 8 жыл бұрын

Confused. You say from 1/10 to 1/16...what about the 1/8 that has been out forever? I bought a 1/8 four years ago.

@pitaracer 8 жыл бұрын

It kinda looks cheap...

@Madtown_66 7 жыл бұрын

I may or may not know someone that know someone that may or may not work there and yes they were always out of parts I heard it from a good source sometimes up to 6 months before they even get new parts and new product in!! just saying that's what I heard.

@cheifblaccfoot2256 8 жыл бұрын

gotta add to collection

@michaelstewart3042 6 жыл бұрын

All rc is upgradeable most folks gonna make it their own any way can't beat for price put some big joes or Louise tires on that bad boy gonna pull trigger on something exceed on Monday when they open lol

@HvdE1000 8 жыл бұрын

Why is it that every body stuck on rc cars is too small. like a 1/10 scale with a 1/9 scale body, this one a 1/7 scale with a 1/8 scale body. for the rest lots off plastics

@frogginwithsteve7790 8 жыл бұрын

I am probably going to buy one but is it water proof

@ravenlorans 8 жыл бұрын

+Ford Raptor If you had Watched the Video and checked their Link and read, YES the Electronics are Water Proof.

@frogginwithsteve7790 8 жыл бұрын

+ravenlorans Well I only watches the video for now.

@ravenlorans 8 жыл бұрын

+Ford Raptor 3:00 and 5:50

@frogginwithsteve7790 8 жыл бұрын

I know but thanks for your help man!

@frogginwithsteve7790 8 жыл бұрын

But I was only worried about the motor

@nickanulli4417 8 жыл бұрын

A lengthened 540? That's like powering a semi truck with a weed wacker motor

@lukebornemann9556 7 жыл бұрын

LOL

@saltystripesfishing2980 8 жыл бұрын

looks toyish but its not bad and if you want an e savage but dont got the budget then get one of thies

@peacewithmyself 8 жыл бұрын

+The Rc Master6042 esavage is cheaper and no longer made

@barharborbasher249 8 жыл бұрын

If you need a reliable Beta tester let me know !

@jogarganera 8 жыл бұрын

tires are a copy of proline trencher

@snakebiterc2373 8 жыл бұрын

those knock off proline trenchers tho

@PaRCQuadRacers 8 жыл бұрын

$500.00 ????? I could see maybe $300.00 tops for this truck.

@eddiecastro5088 7 жыл бұрын

NO 6S WTF REALLY AND ITS $500 NO WAY

@lukebornemann9556 7 жыл бұрын

it needs 6s

@Vincent-team-magic 6 жыл бұрын

1/10 motor on 1/7 chassis on 1/8 tire with 1/8 body... 4/33= this car is 1/8.25 scale, not an 1/7 ;)

@davidmyersretiredaerospace8038 4 жыл бұрын

Looks like a cen truck.

@damiantremont1366 8 жыл бұрын

90 % of their products are always out of stock. I would buy one but I'm used to traxxas support and parts are always available. you get what you pay for. xmaxx is much better for only 300 bucks more.

@crazyplayer0919 7 жыл бұрын

only $300! more, boy you rich

@damiantremont1366 7 жыл бұрын

never had any issues

@AnthonyGman 7 жыл бұрын

Lol traxxas sucks? You must be confused.

@gda882002 7 жыл бұрын

i couldnt agree more ,,,,traxxas sucks

@damiantremont1366 7 жыл бұрын

Greg Ashcraft my experience In the last few months everybody makes junk. my opinion. I was basically saying nitro RC dosnt stock anything.

@evanfelder7114 8 жыл бұрын

hm...

@trevyy240 8 жыл бұрын

they stole the tire tread from proline trenchers

@NCJminecraft 8 жыл бұрын

a 1/7 electric doesn't make sense. not enough power to push it at fast speeds over a long period of time. a truck at this size needs to be nitro or gas to account for the size and to allow fast runtimes that last over the 5 minutes this truck likely provides in its stock settings

@xplosive_rc5516 8 жыл бұрын

Incorrect, not trying to be rude and I understand the love of nitro. Electric can definitely take on 1/7th or 1/5th but it needs a larger motor, unlike this one. It also needs about 5000mah batteries or more and it will surely last enough time for fun.

@DocWolph 8 жыл бұрын

+NCJminecraft A typical 2100Kv Motor with 4s-6s will be more than enough. With 6s, which this thing can carry without mods, tends to be overpowering for 1/8 scale buggies, truggies, and trucks. Getting such a large machine upfront, if you haven't had anything that big before, you want to get used to it moving at a good clip before making it nutso fast.

@twrecks116 8 жыл бұрын

if this were a TRUE 1/7 scale truck, i might have liked it...... being a STRETCHED CHASSIS 1/8 truck....its been done to many times! NOTHING about this is 1/7 scale...only the NAME! build one from the GROUND up as a TRUE 1/7! then WE Might take a look?!

@roberthartmann782 5 жыл бұрын

Looks like a toy compare armma or redcats. Cheaply made under powered and I don't think do wheelies... Lol!!

@Raul-yd8yg 8 жыл бұрын

Its a fairly nice truck but it does look a bit retarded with those wheels and the body so high and small. The motor is a 1/10 scale in a 1/7 which is a bit way too small

@507JoseBrown 8 жыл бұрын

this rc is very expensive... i could found tuff 1/8 brushless 6s ready trucks for the same price

@da9duck303 8 жыл бұрын

+carmelo jose But this is 1/7 scale...

@garylowe8601 8 жыл бұрын

$499 down from $650 atm. I would say that's good.

@507JoseBrown 8 жыл бұрын

Da9el GS just 10cm larger...

@507JoseBrown 8 жыл бұрын

Gary Lowe arrma kraton is 480 and its has a lot of good reviews and is very funn

@jammer2150 8 жыл бұрын

+carmelo jose arrma kraton can be purchased for $430 with tower coupon code

@nickanulli4417 8 жыл бұрын

The truck that sadly attempted to be an X maxx and have trenchers while being a ford raptor.

@rcking9546 8 жыл бұрын

Yup lol

@alfiebailey6165 7 жыл бұрын

Definitely and a savage with the tvp chassis

@hillninjasadventures5169 6 жыл бұрын

Detroit Metal & RC's its a clone of a savage

@hardyb311 5 жыл бұрын

I take the ax7 over this 4 sure

@RSmerlinRS 8 жыл бұрын

needs bigger motor...200amp esc...2x 3s 5000mah lipos. weird body/wheels combo cheap & chinese

@holdupgotlag2437 8 жыл бұрын

90% of their stuff is as cheap as it gets all plastic and yet still expensive for what you get

@ravenlorans 8 жыл бұрын

+holdup gotlag Just go to Amazon and get Plasti Mold. Build your own parts for less and with a Much Stronger Material. Or Buy a 3-D Printer and Print your own parts.