1 Battery QRP with QCX Mini Part 2

1 Battery QRP with QCX Mini Part 2 - Power Test ? !

Рет қаралды 3,620

Күн бұрын

QRP Labs QCX Mini with 1 small battery - how much power did it really make? QRP Amateur Radio and more -
follow along with me as I Rediscover Radio !
Scroll down for contents, links and more information.
Click here to Subscribe to our channel:
/ @q26video
1 Battery QRP - Power Test
I decided to try making contacts ona QRP radio using just 1 9v Battery - and it was surprisingly successful - so - how much power was I really putting out?
In this video I show how I measured the QCX transceiver output and how it changed as the battery drained...
00:00 Introduction
00:50 How to measure RF output
01:57 Power from different voltages...
03:53 What I learnt from this experiment - 3 conclusions
06:11 What's Next?
I'll be making more videos about my radio and electronics projects:
- subscribe to our channel to follow along.
--
Links mentioned in the video:
Tuning up your QCX+
• Tuning up your QCX+
Measuring RF Power
www.qrp-labs.com/qcxmini/rfpo...
QRP Labs:
www.qrp-labs.com/
Bamatech TPIII Ultra Compact Twin Paddle:
www.bamatech.net/morsetasten/...
--
Q26 is a KZfaq Channel, a website and an online store.
Click here to go to our Website for more information and our shop:
www.q26.co.uk/
Other Videos to explore include:
Using and Coding an Infrared IR Diode and Keypad with Arduino
• Using and Coding an In...
Using and Coding a Microphone Sensor with Arduino
• Using and coding a Mic...
How to connect and program LCD I2C Displays & Adapters with Arduino
• How to connect and pro...
--
Subscribe to our channel for more videos on Electronics, 3D Printing and more:
/ @q26video
Click the Bell icon for video alerts.
Q26 Videos by Mortimer Rhind-Tutt

Пікірлер: 18

@bill-2018 9 ай бұрын

Nice video going on from the previous one. All QRP here, FT817ND, h/b h.f. ssb/cw rig, Wireless 19 Set 2 Watts cw on low h.t., one valve xtal cw 40/60m tx, Pye Bantam a.m. on 4m. My Pixie, 350 mW out on 60m got me 180 miles QSO and a SWL report from 220 miles. G4GHB

@HALEdigitalARTS 10 ай бұрын

Excellent series of videos, sir. Thanks!

@n4jaw Жыл бұрын

Mort, another excellent video on the QCX mini. I've got two 40 & 20 meter which I call Bada Bing and Bada Boom. I do quite a bit of Parks on the Air activations in the states via bicycle and find these little rigs with an EFHW are idea for my portable operations. QRP RULES!

@acestudioscouk-Ace-G0ACE 28 күн бұрын

This is a good follow up and very interesting, thanks! Would I be correct in thinking that during your lunch break, the battery was able to recover enough for a final fling?

@ai5dd 2 ай бұрын

QRPp levels, good show OM. 72 de AI5DD

@mikemiles3068 Жыл бұрын

Very interesting video❗️73 KV5P

@mikemiles3068 Жыл бұрын

👍❗️73 KV5P

@doghouse94087 Жыл бұрын

At the end of the QCX-mini instructions is a section on tuning the rig. Hans also has an excellent 45 min video on how to tune the QCX/QCX+/QCX-mini. As an example he used a 30M QCX+ and said that it is not at all unusual for the 20 & 30M radios to begin with low output power. The 30M radio he used in the video started with output power of 0.7W. After removing windings on one toroid and spreading wires on a couple of other toroids he managed to improve the output to about 4.3 W. At the conclusion of the video he was able to supply 13.8V and had RF power reading of 6.4W. After you tune your radio try the batteries again. I would like to see the result. We did our smoke test last night on our QCX-mini and NO SMOKE. In the middle of tuning it now. Search for this and you will get his video on KZfaq.“How to optimize your QCX/QCX+/QCX-mini for best performance.” Thanks Joy

@Q26Video Жыл бұрын

Hi Joy I have linked to this video in the description and mention it in this video. In my other videos I show the tuning up process & make suggestions about preparing for it during the build. My three QCX txcvrs normally run at 5w or a bit more & are fully optimised. This video is just a fun experiment about low power and unsuitable batteries😀😀😀 I hope your build goes well & that you have a lot of fun with your QCX !

@hyperionsixzeroeight5064 Жыл бұрын

Did you measure the battery voltage under load or open circuit? It should be measured while transmitting I think.

@Inkling777 Жыл бұрын

Thanks! I'll have to try my QCX mini with a 9 volt battery, although I prefer 18650s.

@Q26Video Жыл бұрын

I use 18650s too Michael, most of the time - really great batteries! (and Panasonic Eneloop on less power hungry devices). Glad you enjoyed the video, 73 Mort/G4BSK

@jamescrofutt8767 Жыл бұрын

Try a rechargeable 9 V the battery your using has high internal resistance and limits output to about 1 watt, rechargeables will allow higher output at least for a while, find the highest capacity you can find are usually good for several quicker contacts like Pota, Sota, and contest exchanges, they can last longer than you may think good luck and lots of fun experimenting, 73 -J

@mucsbela Жыл бұрын

Excellent video. I liked your one battery experiment very much. Now, there is a polarity protecting diode in QCX Mini. That drops the incoming voltages by 0.6V approx. What if you shortcut that? Then your power could be bigger also the battery would last longer...Do not you want to try this? 73 de Béla HA4BM from Hungary.

@Q26Video Жыл бұрын

Thanks Bela - I'm pleased you liked the video and yes, taking the diode out is an option I have considered...73 from Mort/G4BSK

@bill-2018 9 ай бұрын

I think I'd keep the diode for safety, reverse voltage by accident is not good. G4GHB

@gliderrider Жыл бұрын

Try an eveready lithium 9volt. They really put out! It’s what I use in my 4state qrp crickets. And they last a long time. Don’t bother with those 9volt lipo rechargeables. de n5vwn