Passenger wiper of my '05 Chevy Cavalier stopped working. I go step by step on different causes and show how to fix the problem. Replacing the wiper linkage solved my problem.
Пікірлер: 34
@WeAreUnity.10 ай бұрын
Thank you!!! Fixed my wiper in under 2 minutes. Just had to tighten that wiper bolt, 13mm nut. SO everyone reading, try that first before you think it was the linkage like I thought it might be cause the wiper was acting crazy.
@IncomeOptionsTrading10 ай бұрын
glad it was useful and a quick fix!
@WeAreUnity.10 ай бұрын
@@IncomeOptionsTrading Me too!!
@sangeli19012 жыл бұрын
My linkage broke a few years ago cause I turned the wipers on with a thick layer of snow and ice on windshield. $200 later the mechanic charged me for parts and labor. Fast forward to this year and I accidentally did the same thing but only the passenger side was out of alignment. I wasn't going to pay another $200+ for the repair and I was going to order a new transmission off eBay and save money. After watching this clip I was able to determine that the passenger side spline was worn out. I got out the JB Weld and put a dab where the wiper arm connects to the transmission spline, now its good to go! I'll see how long it lasts!
@IncomeOptionsTrading2 жыл бұрын
awesome to hear!
@palacios923 Жыл бұрын
Nice ! I fixed my wiper thanks to you.
@IncomeOptionsTrading Жыл бұрын
Glad it helped!
@mattestes4758 Жыл бұрын
Mine did same. I drilled where connected to where arm attaches. Tossed me nut an bolt on it an fixed. Few min time an don't cost anything.
@ozziebramhall63503 жыл бұрын
Thanks man! Very informative!
@kevblaxk7818 Жыл бұрын
Thank man
@carmelahearle957 Жыл бұрын
Very good video! thanks
@iflax0042 жыл бұрын
Thanks for making this!
@IncomeOptionsTrading2 жыл бұрын
Glad it could help!
@DanielRodriguez-nk7nb3 жыл бұрын
THANK YOU! YOU SAVED ME! 😂😌
@IncomeOptionsTrading3 жыл бұрын
Glad I could help!
@leeleviner81593 жыл бұрын
Thank you..
@debbiesmall377 Жыл бұрын
I was looking to see how to change the motor driver side motor wiper doesn't move
@AJ1990.3 жыл бұрын
How did you pry the center linkage off? It looks riveted. I have the exact same issue. I'm going on a road trip and I need to get this fixed. Dont want to get stuck in a storm with this issue. If you could get back to me that would be incredible.
@IncomeOptionsTrading3 жыл бұрын
I don't remember exactly as it was quite awhile ago. I think I just pried it off with a screwdriver.
@AJ1990.3 жыл бұрын
@@IncomeOptionsTrading ok. Thank you man. I appreciate you getting back to me. So you just took a flathead and popped it off? Was putting it back on as simple as just snapping it back in place? If you cant remember its cool.
@IncomeOptionsTrading3 жыл бұрын
@@AJ1990. If you're talking about the connection with the white piece shown at 3:06 (I can't add an image to the comments) then yes I just pried the existing one off with a flathead and was able to snap the new linkage together onto the existing metal piece just fine. Hope that helps and makes sense.
@AJ1990.3 жыл бұрын
@@IncomeOptionsTrading thank you.
@AJ1990.3 жыл бұрын
@@IncomeOptionsTrading I did what you said and it worked. Thanks man. I really appreciate it.
@ItsKCs Жыл бұрын
Where u buy it?
@IncomeOptionsTrading Жыл бұрын
Online at probably any auto shop. I used 1A Auto
@truecrony Жыл бұрын
Autozone sold me new bushings which I replaced but the bushings won't snap together with all the force I dare apply. Any suggestions? Replace the entire linkage as you did? Curious why you didn't just replace the bushings? Yet, also stumped as to why my bushings won't reconnect. Thank you all.
@IncomeOptionsTrading Жыл бұрын
Unfortunately I think you have to replace the whole linkage, which is why I did instead of just trying the bushings
@markwilder10092 жыл бұрын
1996 Chevy 1500 pick up truck driver side window wipe stuck
@markwilder10092 жыл бұрын
1996 Chevy truck 1500 drive window wipe stuck
@MrBradshawbenjamin Жыл бұрын
I would be nice if you recorded yourself removing those clips instead of just explaining it, because I'm trying to pop the head up but I'm afraid I'm going to break it and I would have much more confidence and understand your explanation better if I saw you do it.