10 Lumion Tips to Speed-Up Your Workflow

Рет қаралды 27,297

Күн бұрын

I’m going show you 10 Lumion tips you didn’t know about that will speed up your workflow!
🔷 Try Lumion for free: bit.ly/48HCP4K
🔷 Get Lumion: bit.ly/3ObnbX0
🔶 Lumion FREE Training: nunosilva.pt/lumion-training
👉 NEW Lumion Render Course: nunosilva.pt/new-lumion-course
Best PBR Textures: nunosilva.pt/pbr-textures
▶ How I created this Villa in the NEW Lumion: • How I Created This Vil...
▶ What I do before starting any Project: • Do this before startin...
My Site: nunosilva.pt Contact me for business inquiries
Instagram: / nunosilva3d
Artstation: www.artstation.com/profeta
Linkedin: / nunosilvapt
Behance: www.behance.net/nunosilva3d
If you have any questions, ask me in the comments below the video.
Computer Specs & Gear: kit.co/nunosilva
This is done using Lumion Render rendering software for architectural visualization. It’s a great 3D render software that saves a ton of time for architects because it helps you achieve the level of detail and realism not available in any other similar software.
Lumion Render is fully compatible with most 3D modeling software, including Revit, SketchUp, ArchiCAD, 3ds Max, Rhino, AutoCAD, Vectorworks, and many others.
#tips #lumion #rendertutorial

Пікірлер: 135

@NunoSilva3d 5 ай бұрын

Which one was your favorite? And don't forget to comment if you want part 2! 🙌

@ShomitSarkar 5 ай бұрын

Yes, part 2, please. Today, i learned the K key and the V key...didn't know these 2

@NunoSilva3d 5 ай бұрын

Awesome!@@ShomitSarkar

@dbstudio6930 5 ай бұрын

can't wait for part 2, very good job!

@sarubobby7023 3 ай бұрын

Same @@ShomitSarkar

@ArtDesigner-uz1nn 3 ай бұрын

@@NunoSilva3d Lumion Need to fixe Reflection plan add more than 10 plan and fixe lumion shaders

@mustafasarkisla 5 ай бұрын

The moment I hear you say "What's up guys, Nuno here." My day becomes good. Thanks man, you're a blessing.

@NunoSilva3d 5 ай бұрын

🙌 glad to hear that!

@dhimiterlati1994 5 ай бұрын

Thank you Nuno, please part 2!

@NunoSilva3d 5 ай бұрын

Sure!

@user-dl1vj3gm9k 23 күн бұрын

Thanks Nuno Very helpful! Waiting for part2

@atomixdigital 5 ай бұрын

Yes another video like this please !!

@user-ws5xn5rn1q 5 ай бұрын

Very helpful!!! Please part 2!!

@WaliuSDZ 4 ай бұрын

Thanks for everything nuno we learned a lot from you ! Waiting for part 2

@HamedBabaei-gx5xs 5 ай бұрын

Thanks Nuno for your learning course

@MahKhaRah 5 ай бұрын

This is great!! Waiting for part2

@IsraelLealeve 5 ай бұрын

Maravilloso video Nuno! Siempre son muy útiles! Esperamos con ansias la segunda parte

@nadjibbenahmed9838 5 ай бұрын

Thanks again you are the best 🎉

@jablounmariem 5 ай бұрын

Thank you, Mr. Silva. I loved the trick of positioning objects on inclined surfaces the most!

@NunoSilva3d 5 ай бұрын

Glad it was helpful!

@kennymarroquin2612 5 ай бұрын

Thank you Nuno! please part 2!

@NunoSilva3d 5 ай бұрын

Sure. :)

@kez2282 3 ай бұрын

thanks for the help!

@Lumion3D 5 ай бұрын

Stellar as always! Thank you Nuno 🚀👏

@NunoSilva3d 5 ай бұрын

My pleasure! 🙌

@user-tk5il5fi2l 5 ай бұрын

🙏 please part 2!!!! and thank you very much for all of your tips!!!!

@architecturewithwalz9322 5 ай бұрын

This deserves 1000 likes per person. You are awesome Nuno. Thanks for sharing

@NunoSilva3d 5 ай бұрын

Wow, thank you!

@haceneabdennour75 2 ай бұрын

thx for all you do

@MuhammadFarisDarfia 5 ай бұрын

thankss mann

@TheMiguel715 5 ай бұрын

Thanks! Great advices and tips. Excited for the part 2

@NunoSilva3d 5 ай бұрын

Glad you enjoyed it!

@Ravil81 5 ай бұрын

Thanks, friend!

@sasikumar5822 5 ай бұрын

❤❤❤ wow - you very helpful for me .. waiting for your 2nd part video

@NunoSilva3d 5 ай бұрын

Glad to hear that!

@bradvanburen3803 5 ай бұрын

Very helpful Nuno! I did not know the rotate trick. Keep making more videos!

@NunoSilva3d 5 ай бұрын

Glad it was helpful!

@Lance_Tonkin98 5 ай бұрын

Waited for this!!😎 thanks man I've learned a few things now even after years of using Lumion😂, a part two would be amazing!!

@NunoSilva3d 5 ай бұрын

Sure, if more people ask for it, I'll plan a part 2 soon! :)

@sethmoyer130 5 ай бұрын

A d5 version would be great too !

@Ramprasath_ 5 ай бұрын

All is my favourite❣️. Definitely need part 2👍💥

@NunoSilva3d 5 ай бұрын

Sure 😊

@JamesAkanbi 5 ай бұрын

Kindly release the part 2. Thank you chief

@NunoSilva3d 5 ай бұрын

Thank you!

@thebullishpepe4491 11 күн бұрын

Thank you! These are extremely helpful tips! 👍

@NunoSilva3d 10 күн бұрын

Glad it was helpful!

@khushilK. 5 ай бұрын

Really useful tips! Thanks

@NunoSilva3d 5 ай бұрын

My pleasure!

@Ekon001 5 ай бұрын

Good video Nuno! A couple of tricks I didn't know about. Thank you.

@NunoSilva3d 5 ай бұрын

Happy to help!

@healthwealth2847 5 ай бұрын

Thank you so much 👏👏👏

@NunoSilva3d 5 ай бұрын

You're welcome 😊

@betraouiabdechaker8131 5 ай бұрын

Thank you for the helpful tips 👌❤️ before even watching the video haha

@NunoSilva3d 5 ай бұрын

Haha! Enjoy! :)

@kasunarunodha4754 5 ай бұрын

Perfect 👌👌 Waiting for part 2

@NunoSilva3d 5 ай бұрын

Sure 😊

@nisoneji 5 ай бұрын

thanks you! Part2 please. Keep on posting ! amazing skills !

@NunoSilva3d 5 ай бұрын

More to come!

@boriszlatkovdesign 3 ай бұрын

always the best :)

@ImaneZouaydi 5 ай бұрын

Amazing your videos are the best

@NunoSilva3d 5 ай бұрын

Glad you like them!

@ronaldofuellas8671 Күн бұрын

Thanks a lot, well said.

@jaimeromero8345 5 ай бұрын

Thanks Nuno! Looking forward for part 2...

@NunoSilva3d 5 ай бұрын

Working on it!

@a7medsala7aldin. 5 ай бұрын

Waiting for part 2😊

@NunoSilva3d 5 ай бұрын

Great!

@allemeshkin 5 ай бұрын

Nuno this is awesome!!!!)))

@allemeshkin 5 ай бұрын

DO you know why lumion crash when i press raytrassing render?But worked 2 month ago. Nvidia 3060

@NunoSilva3d 5 ай бұрын

Hard for me to say. You can contact Lumion support and send them your log files.

@rashedibnafiz 5 ай бұрын

Make a part 2!!! Great content!! A personal request for you, discuss about the Orthographic views a bit!

@timeatalamasz3631 5 ай бұрын

Part 2 yes!

@ravibhatt8812 5 ай бұрын

"Thank you for part -1🙏🏻! Looking forward to part 2. Could you please include tips on light placement, especially for up-down wall lights in house elevation? It's been challenging to adjust cone angle, rotation, and brightness. Your guidance on this would be highly appreciated.

@NunoSilva3d 5 ай бұрын

You're welcome! 👍

@jaimecolodro1588 5 ай бұрын

Great video

@NunoSilva3d 5 ай бұрын

Thanks!

@jithinmj8112 5 ай бұрын

you are awesome bro,,,,

@NunoSilva3d 5 ай бұрын

Thank you!

@ramy-hits 5 ай бұрын

Part 2 please and thank you in advance 🙏🏻

@user-je3ny2bv1s 5 ай бұрын

Amazing Video NUNO we need part 2

@NunoSilva3d 5 ай бұрын

Thank you!

@Unboxit01 26 күн бұрын

The First One Saved me Alot! ❤ Please Tell me your PC Specs and U have only Lumion and SketchUp That's Why It's Fast???

@PedroRimoldi8 5 ай бұрын

More videos like this!

@NunoSilva3d 5 ай бұрын

You got it! 💪

@takimohcene8366 5 ай бұрын

Sehr interessant

@axesata 4 ай бұрын

You should do a similar video for D5 as well. Been trying it out recently.

@user-to8et3wi4o 5 ай бұрын

Nice

@archimolar 5 ай бұрын

Part2 please and thank you 🎉

@mortadaslama6572 5 ай бұрын

think you mr nano we need more videos ❤❤👌👌

@NunoSilva3d 5 ай бұрын

Working on it!

@yousifelgenaid9855 5 ай бұрын

Part 2 please ❤

@shribalajipalace 5 ай бұрын

nice video

@anesmellahi7976 5 ай бұрын

very helpful hank you is there a part 2 ?

@andrewmcdonald2067 5 ай бұрын

Hi Nuno, thanks again for your brilliant, clear and concise tutorial!! You are a life saver! and YES please, PART 2 would be great!! Could you also do a tutorial about Transparent drapery / curtains. I have wasted over a week trying to do transparent curtains , and still cant get it to work. The problem is everything keeps changing and the only tutorials I can find use old Lumion 7 etc. Can you put something together on this topic that's relevant for Lumion 23, bring together all your tips from all your past tutorials in a single video ( which maybe could be updated for LU23 + 24 + 25 etc as it all changes). Keep up the good work and thank you for all your help.

@Lumion3D 5 ай бұрын

Hi Andrew! Sorry you're having trouble with this. Just letting you know this will be covered in an upcoming tutorial for Lumion 2024. At the moment, you can't do subsurface scattering on curtains for L23 - but that will be possible in Lumion 2024! 🌟

@andrewmcdonald2067 4 ай бұрын

@@Lumion3D thanks for letting me know!! cant wait!

@mohammadrahnavard3709 5 ай бұрын

part 2 plssss🙏🏻🙏🏻🙏🏻🙏🏻

@ronaldcurimilma7998 5 ай бұрын

Genial Nuno Felicidades 🎉 Me gustaria sugerirte hacer un tutorial de renders exteriores ya que es donde mas falla en esta nueva versión, usando raytracing y sin el. Ya que pude notar muchas fallas y un retroceso a su versión 12.5. Saludos desde Ecuador 🇪🇨

@NunoSilva3d 5 ай бұрын

Check this video: kzfaq.info/get/bejne/ebSbp9lnrKy1dn0.html

@michael_monty1269 4 ай бұрын

Keyboard shortcuts... aaahh yes!

@MostafaMohamed-vq9oi 5 ай бұрын

please Nuno , Make a video showing the best way to get models with materials and right textures from 3dsmax without need to use online convertion and make it as an offline mode

@lkabrams 5 ай бұрын

Part 2 on material emissive( how to stop emissive materials from flickering)

@marcrondon2076 5 ай бұрын

part2 thanks

@umarmuhsin9358 5 ай бұрын

We want part 2

@coolwavesful 5 ай бұрын

We need 2nd part plz

@3dinaradesign 5 ай бұрын

this Lumion version is very good, by my computer spec is way below the requirement...ooooo..booy...

@vivekvishwakarma4731 5 ай бұрын

Part-2 please

@DevPalliSri 5 ай бұрын

Are Mentioned Tips Also Works On Lumion 12.5? Thank You.

@NunoSilva3d 5 ай бұрын

Yes, they do! :)

@maheshlalm6387 5 ай бұрын

Hi boss can u pls put part 2

@ibrahimconteh8368 5 ай бұрын

Hy Nuno i am a student and i have been using Revit for modeling do you offer patron for beginners from revit to lumion step by step..thank u

@AlabasterCambricTH7206FC 4 ай бұрын

I have a question Nuno.. when I add surface imperfections i got from ambientcg, my lumion only accepts PNG files not TGA files like in your video...

@savyasachimondal1196 5 ай бұрын

please upload e complete guide video about Lumion ray tracing. I am facing some issues, like small molding surface is being faded due to denoiser of Lumion. How can I overcome this issues. Please help me in this issues.

@NunoSilva3d 5 ай бұрын

Increase samples.

@Lumion3D 5 ай бұрын

Hi! Just letting you know you can always contact our support team through the website - they'll assist you in no time 🤗

@savyasachimondal1196 5 ай бұрын

@@NunoSilva3d even I did, but the issues did not solve. They need to Update, the ray tracing, with denoiser.

@abdihakim4634 5 ай бұрын

Part 2

@user-dt8yr1mt8j 5 ай бұрын

👍

@timeatalamasz3631 5 ай бұрын

🎉

@andru.velfer 5 ай бұрын

Very good tips Nuno! Can't wait for you to release a similar version focused on the D5 Render workflow, would be awesome.

@Azad-qm2pm 5 ай бұрын

Hi Nuno. Just a quick question: Dont you think Lumion does not have any advantages after D5's last updates ? I mean pricing, render quality, rendering time, total number of objects, etc. D5 seems to have passed Lumion in all this categories. Why would people still buy Lumion anyways ?

@brians5650 5 ай бұрын

😱

@b_aba4448 5 ай бұрын

i will make of stage design, and i will added a light/ spot light with change colour everytime.... how are you do ?????

@NunoSilva3d 5 ай бұрын

Use the Animate Light Colors effect.

@user-og9rq8vp5h 5 ай бұрын

for example all tree change diffrent size and height how can =)

@NunoSilva3d 5 ай бұрын

Just select all, and on the top right corner you have an option to scale them randomly.

@ebramnabil8923 5 ай бұрын

When i put a light in space of my building in lumion , it's go through the walls of building. How can i overcome these problem please ?

@NunoSilva3d 5 ай бұрын

Spotlights don't have that issue. If it's area light or point light in older versions of Lumion, you need to adjust the falloff and intensity for that not to happen.