10-Piece GEARWRENCH Bolt Biter Deep Extraction Socket Set

10-Piece GEARWRENCH Bolt Biter Deep Extraction Socket Set - [86071]

Рет қаралды 176,590

Күн бұрын

We stripped several lugnuts on our 1969 Chevy C10 pickup truck to the point where they were round. Using just the GEARWRENCH Bolt Biter Deep Extraction Sockets and an impact wrench, we removed the lug nuts with no issues. However, one of the lugnuts did require that we use the 13/16- for the most stripped lugnut.
GEARWRENCH Bolt Biter 86071 Set: imp.i284638.net/jWeJkn
Keep current with our great content:
Facebook: / shoptoolreviews
Twitter: / shoptoolreviews
Instagram: / shoptoolreviews
KZfaq: / shoptoolreviews

Пікірлер: 78

@michaelelder5432 3 жыл бұрын

I believe they can be used in forward, to help bust a seized bolt or nut. Sometimes, if you torque the fastener forward, then reverse again, it helps to break it free.

@b-2466 3 жыл бұрын

I love gearwrench. They may not be the best but for wrenches and sockets they're my preferred brand.

@EliTeTritton 3 жыл бұрын

The straight design on the flute is for left and right hand threads if I’m not mistaken

@btrswt35 3 жыл бұрын

Socket manufacturers, STOP laser engraving sockets! Stamped or embossed markings ONLY!

@aerialenthusiast7435 2 жыл бұрын

Why is stamped or embossed markings better?

@Darksider182 2 жыл бұрын

@@aerialenthusiast7435 stamped markings done wear off the way laser etching does. I have a set of sockets that I can't read anymore because the laser etching wore off.

@aerialenthusiast7435 2 жыл бұрын

@@Darksider182 ohhh okay I see thanks for the reply mate

@keegankent4402 3 жыл бұрын

I can’t believe they didn’t even skip a beat with the impact on them!!

@AverageJoeHotRodShow 3 жыл бұрын

They work both ways for us with some old cars that came with left hand thread wheel studs on one side.

@Shoptoolreviews 3 жыл бұрын

60’s Mopar?!

@AverageJoeHotRodShow 3 жыл бұрын

@@Shoptoolreviews early 60’s Buicks used em too. We had a 62 Buick invicta.with em.

@laukc7085 3 жыл бұрын

I would love to see some extractors like that be tested on wheel locks. Most wheel locks have anti theft rings that just spin with traditional spiral fluted extractors. Also maybe use a rim with deeper lug nut opening cause most cars now days have very deep seated lug nuts.

@mikejensen1473 2 жыл бұрын

A cold chisel and a ball peen hammer will defeat the anti theft rings very quickly

@laukc7085 2 жыл бұрын

@@mikejensen1473 12 point sockets work pretty well on them too. Hammer one on and it will usually force the theft ring down and then will bite on the face of the lock nut.

@wayned3137 3 жыл бұрын

I’d like to see how the sockets look like afterwards

@petergross135 3 жыл бұрын

The forward is for rusted threads where when taking it off you have to go backwards and then forwards to clean out all the crap in the threads.

@AverageJoeHotRodShow 3 жыл бұрын

Or if you have a pre 75 MOPAR or early 60’s BOP GM with reverse thread lug-nuts on one side of the car.

@bobit8742 11 ай бұрын

this is what i am talking about, real world sh*t. Using it like an average joe would use the crap out these things. This channel always been honest and the truth 😊

@bobsundquist2039 2 жыл бұрын

I got that Makita after watching your review. It is a great tool. Use it all the time.

@Shoptoolreviews 2 жыл бұрын

Good choice! Glad to hear you like it. Thanks for watching.

@bobsundquist2039 2 жыл бұрын

@@Shoptoolreviews waiting for the 18v ratchet review. Might be getting one for Father's day.

@kuba7875 3 жыл бұрын

Great ,,real" test , another must have tool. Thank you

@Shoptoolreviews 3 жыл бұрын

Great to hear. Thanks for watching.

@johnbailey9682 2 жыл бұрын

You did a great job oh yea you got a thumbs UP .

@andyb9994 3 жыл бұрын

I've always liked GW brand stuff, good products.

@OnTarget100 2 жыл бұрын

Awesome video.

@Shoptoolreviews 2 жыл бұрын

Glad you enjoyed it. Thanks for watching.

@nikking5277 3 жыл бұрын

Was genuinely impressed 👏, need to get me one of those

@djivan69 3 жыл бұрын

Wow Tim... I for sure will get it. Thanks for the video

@jamallaidley4718 3 жыл бұрын

I can testify they work 💪

@404notfound..... 3 жыл бұрын

Wow! Impressive!! On order !!

@Shoptoolreviews 3 жыл бұрын

Awesome, that's great to hear. Let us know what you think. Thanks for watching.

@james10739 3 жыл бұрын

The straight flute would also be useful for left handed thread

@Shoptoolreviews 3 жыл бұрын

That is correct, it works well for left-handed thread as well. Thanks for watching.

@ch33kmanddmc44 Жыл бұрын

Great video. I just bought an extractor set before I seen this set. I hope it works because I do like the +& - sizes. I hope the Mechanic God's favor me to extract these nuts. LoL

@lukeancill8470 3 жыл бұрын

Game changer/time saver!

@BobSmith-dm3vp 2 жыл бұрын

The price sure jumped up on these after your review!

@cujoedaman 3 жыл бұрын

I would have liked to see a hand test with a breaker bar.

@EVnewbie 3 жыл бұрын

Let's try to strip out the lugs on this 69 Chevy..... Good thing it worked or... For Sale 69 Chevy--needs three new lug nuts.

@danfarbrace6308 3 жыл бұрын

Very impressive. I'm off to see if they are available over here in the UK.

@Vteccer666 3 жыл бұрын

not much use for european cars as wheel bolts are usually smaller ie Audi wheel nuts are 17mm

@weduhpeople8504 3 жыл бұрын

Im triggered you didn’t use a Milwaulkee gen 2 mid torque!

@rangerdanger9485 3 жыл бұрын

Start at nine minutes and 15 seconds if you don’t wanna hear him talk for 10 minutes

@josephwetzel4288 19 күн бұрын

Can or could you use these on perfect undamaged bolt without marking?

@shepherdsfleetservicesllc8147 Жыл бұрын

Nice

@MrSupernova111 2 жыл бұрын

Not bad!

@pinchuszelishovsky633 3 жыл бұрын

Can I used them for non extracting just a a regular socket set is it going to damage any of the lug nuts??

@Shoptoolreviews 3 жыл бұрын

No, you will definitely damage the lug nuts if you use these. Thanks for watching.

@averystorey6486 3 жыл бұрын

Does this mean if you lose your keyed socket you can use these? If you have some you should try it, it would be a great video!

@arthurgarcia4389 3 жыл бұрын

Depending on the type. Won't work on all i assume because the smallest size is 19-3/4. Then theres the one with the spinning sleeve common on bmw. I think they'd work for most tho

@emmanuelalva6597 Жыл бұрын

Try it on a rusty truck with lug nuts that have been in for more then a year

@kenyatta932 Жыл бұрын

Why didn't u show the inside of the sockets after the use

@tjac4801 Жыл бұрын

Are they thin and deep enough for aftermarket rims?

@Shoptoolreviews Жыл бұрын

That really depends on which rims. They are not exactly thin, so they may not work on some of the slimmer lugnut orifices. Thanks for watching.

@TheDirtbikerdude 3 жыл бұрын

👍

@johnb1121 3 жыл бұрын

I want 2 know why there s 1 thumbs down is it because there not Mac rbrt

@johnconner3901 2 жыл бұрын

Or if it's left hand thread

@weduhpeople8504 3 жыл бұрын

I have lock nuts that are completely round smooth on the exterior so the key engages on the inside with angled shark tooth shaped teeth. Im afraid wheel thieves would be able to remove them with this. 🥺

@mercury0214 3 жыл бұрын

Yup they will

@mercury0214 3 жыл бұрын

Still though I wouldn’t worry to much your average tire thief isn’t to smart I’m sure and they’ll most likely see your car and give up and go to an easy one! I have them too but the same worry crosses my mind a lot my work area isn’t to good!

@racecitypatriot5017 2 жыл бұрын

If someone really wants to steal something their going too. Like the old saying says. " A lock only keeps a honest man honest."

@2nd66tube2 3 жыл бұрын

If your on the side of the road with fucked up lugnuts and just happen to have this kit and didn't buy proper lugnuts to replace them you deserve to be stranded on the side of the road

@nixaeagle141 3 жыл бұрын

I was cringing , don’t mess up The Ansen Slots .

@Shoptoolreviews 3 жыл бұрын

Don't worry, we were being very careful. ;) Thanks for watching.

@beerwrenchgarage 2 жыл бұрын

Awesome video! Win a set of these sockets here: kzfaq.info/get/bejne/nMdjp8mmzpqYaXk.html

@jackw.3480 3 жыл бұрын

Try a rusty bolt.

@SLOBALT2009 2 жыл бұрын

140ftlbs? I don't think so...

@mikecon7634 3 жыл бұрын

Looks like you stole those wheels off of Hutch's Torino.

@saturnmedia1 3 жыл бұрын

Under 100 views. Woohoo

@harveyadams5453 3 жыл бұрын

Not impressed at all I seen the comment section you have a lot of inexperienced talkin loud and saying nothing... All of us technicians whose experience is vast. Knows that 140 foot pounds is nothing for a lug nut you would have to go to approximately 190 ft lb along with extreme rust and corrosion along with being super rounded then see if that product could remove them

@BryceMR2SW20 3 жыл бұрын

Why are you torquing wheel nuts to 190ftlb? 🤔

@jessejuliano5336 3 жыл бұрын

Lame test...how bout removing theft deterrent lugs?

@Lawrence-Joseph-Norse 3 жыл бұрын

Repent to Jesus Christ! Are you a sinner? Saint Luke 5:32 KJV I came not to call the righteous, but sinners to repentance. Saint Luke 13:3 KJV I tell you, Nay: but, except ye repent, ye shall all likewise perish.