10 Steps to Calculate a Volume in Agisoft Metashape with GCPs

No video

10 Steps to Calculate a Volume in Agisoft Metashape with GCPs | Aerial Surveying

Рет қаралды 24,934

Aerial Surveying

Күн бұрын

Пікірлер: 25

@AlteredGamersSA 2 жыл бұрын

That was so simple! I remember the 10 year old agisoft program, u needed a degree in applied maths to use it....

@madronesky5603 2 жыл бұрын

good education

@informationforu5082 4 ай бұрын

without gcp s it is possible or not

@dronense5538 2 жыл бұрын

Awesome dude, thanks!

@aerialsurveying 2 жыл бұрын

Thanks!

@kritidetsuksunan7934 2 жыл бұрын

Thank

@user-iq2jn5qi2s 2 жыл бұрын

Thanks for the lesson! Nice lower third can you share it at the link below the description?

@aerialsurveying 2 жыл бұрын

Sure will do.

@jerseyshoredroneservices225 Жыл бұрын

When calculating stockpiles is it important to filter the sparse cloud and dense cloud? Are reprojection accuracy, filter buy confidence, etc just a waste of time?

@bmoore493 Жыл бұрын

Can this be done with the standard edition, or do you have to have the professional edition for volume calculations. Can it be done without gcp,s?

@jerseyshoredroneservices225 Жыл бұрын

Is there an extra process to go through when the material is bound by retaining walls or is in a bunker? Thanks!

@loak24 2 жыл бұрын

Hello! do you suggest to do the drone captation through a 3D map OR PhotoMap? thanks

@aerialsurveying 2 жыл бұрын

Hi, I Assume you are referring to the Capture being Nadir (Camera Straight Down) vs Oblique (Tilted on an Angle), both Methods in One Project can produce Optimal Results.

@loak24 2 жыл бұрын

@@aerialsurveying thanks, I was referring to the choice one has to make when starting a new mission in GS PRO

@MrDennisrsjr Жыл бұрын

Question on GCPs. We have imported gcps into the project but we do not see any white flags on the images to align our markers. We've been using Metashape for a few months now and this is the first time we have encountered this. Any idea on what we may be doing wrong?

@MrDennisrsjr Жыл бұрын

For reference, we have converted all cameras to the state plane coordinate system which our gcps were shot in. We do see the blue flags on the maps, just no way to align them.

@jeanjoy9731 2 жыл бұрын

How is autodesk recap compared to agisoft metashape for generating DEM from drone survey?

@aerialsurveying 2 жыл бұрын

Hi, Sorry im not familiar with Autodesk Recap.

@jeanjoy9731 2 жыл бұрын

@@aerialsurveying Thanks, i have found that Agisoft is much better than Recap

@mwapedaka9677 2 жыл бұрын

hi can i do the same in pix4d?

@aerialsurveying 2 жыл бұрын

Hi, Sure, this can be done, though some Methods are a little different in Pix4D. We plan on doing a video of this soon.

@mwapedaka9677 2 жыл бұрын

@@aerialsurveyingI can’t wait sir

@bankole_sulton Жыл бұрын

Whem optimising, you said select all your cameras. That's wrong. You are selecting camera/model parameters

@jerseyshoredroneservices225 Жыл бұрын

What is the significance of choosing different Base planes? Best fit plane, mean level plane and custom level have shown dramatically different results. When we get a result how can we check to make sure it's accurate? The more I dig into this the less confidence I have. Almost seems like the software is just making an educated guess 😞

@felipepresser 2 ай бұрын

I do not know if you are familiar with GIS tools, but you can calculate the same amount of volume by using surface volume tool in ArcGIS. It is a good way to compare both. In regards to the base planes, I prefer using custom level, especially in areas where I do not have GCPs or in cases where there are some walls or other interferences such as trees or machinery. Hope this fits to you.