Рет қаралды 8,848
$100 DIY PLATFORM BED
This easy DIY was inspired by the Urban Outfitter’s version that is upwards of $600. My version, depending on size and species of wood you choose can be completed for about $100.
Wall colors: SW Tricorn and Pure White
pocket screws: amzn.to/2OPVEf5
Kreg jig: amzn.to/2vwpwpV
sconces: amzn.to/2Hi7kmL
white duvet:
rstyle.me+hu1phTL3gWfPBsrlnWnmXQ
lumbar pillow:
rstyle.me/+dZqoGQCtxZEraCcEVj...
alternate bun feet (mine were from Lowe's):
amzn.to/2Hfp568
another option for mounting pieces: amzn.to/37kioKD
Find the rug here:
boutiquerugs.com/chester-che-...
PLEASE NOTE: Some links are affiliate links. You will never pay more for products purchased through affiliate links.
Here are the supplies I used to create a king size bed.
-rails and center bracing: 5 2x6 boards (or use smaller board lengths and widths for smaller beds or different preference)
-cross bracing: 5 2x3 boards
- 4 bun feet (or 4 appropriately sized legs instead of attaching bun feet to 4x4 blocks)
-(the way I did this requires T-nuts for the bun feet, but not if you use a full leg
-corner brackets
-16 1”lag screws (size to fit the opening of your bracing. These would also need to be smaller if you choose thinner rails)
- 16 1.5” lag screws for attaching to the legs
-a box of 1.5” pocket screws
-stain of your choice
Find more projects and inspiration at www.thesimplefarmhouse.com
Www. the.simple.farmhouse