1000mm/s: FULL PRINT STUDY on Voron Ferrari
Рет қаралды 212,761
2 жыл бұрынMore, here in the video description:
I started with a V0.0 Kit from Aliexpress (now it's 0.1, which is better in any respect)*:
Formbot Voron V0.1 Kit (AliExpress) bit.ly/39kfWdC
LDO Voron V0.1 KIT (Caribou3D) bit.ly/3KBxqzL
Recommended Kits for bigger DIY printers:
Voron 2.4 Kit (AliExpress) kit bit.ly/3PklmWE
Voron Trident Kit (AliExpress) bit.ly/3yxMaNe
STL files, instructions and BOM:
247printing.gumroad.com/l/247...
The full print recorded on a FLIR ONE PRO thermal camera is uploaded!
Awesome motion pictures to realize that the part cooling is just on the limit here.
Settings and 247upgrades done on this printer: Please see below!
I started my build with a kit from Formbot (Aliexpress)
A convenient and good quality start, but you may change/add some parts*:
s.click.aliexpress.com/e/_AD5kIa
After tuning the Voron 0.0 to "247 Stage 1", it is possible to do this feasibility study of a full and uncut 1000mm/s print, which opens potentials for faster daily FDM printing at high quality.
The Voron Zero is a very good basis for tuning at low cost, as the moved parts are light weight.
A great open source design by vorondesign.com!
Detailed explanations will follow:
My series "Deep Dive into Speedprinting" is in the work - stay tuned for that!
Support my work at Patreon:
/ 247printing
My Instagram and Twitter - more about my doings and behind the scenes:
Instagram: / 247printing
Twitter: / 247_printing
Next Videos:
- complex print at 1000mm/s (RPI holder) - Preview on Instagram/Twitter/Reddit/Facebook!
- entry to "VzSpeedCube challenge" (speed AND quality matter!)
- a speedprint at flawless quality of a 3D Benchy in PLA: way below 10 minutes
- a print of a 3D Benchy as fast as possible: faster than 4 minutes
- Video Series: "Deep Dive into Speedprinting": Motion, Extrusion, Cooling, Software
- More? My list for content is insanely HUGE - keeps me busy for years...
💚Pizza, Beer and Coffee helps me going on💚
paypal.me/247printing
💚Thanks to all who support/ed my work💚
---------------Settings and Setup:
Filament*: ESUN ABS+ - a great choice filament for strong parts and easy printing:
amzn.to/3Bi0x7k
Layer 1: 200mm/s (requested).
Layer 2: 450mm/s (requested).
Layer 3 to end: 1000mm/s (requested).
T_Hotend = 310C
T_Bed = 80C
Commanded Acceleration/Deceleration: 35.000 mm/s² (rate of velocity change)
square_corner_velocity: 25mm/s (NOT the resulting velocity value at corners)
Nozzle: 0.4mm
Layer Height: 0.1mm
Line width: 0.4mm
Volumetric flow: 40mm³/s
Lengths of straights (between corners): 65mm
Min. lengths of printing @ REAL 1000mm/s: 35mm per straight
Xxxx ALL DESIGNS AVAILABLE SOON xxxX
@ Voron Users / Thingiverse / GitHub
*******UPGRADES 247printing Vzero STAGE 1:
-MOTION* (Part 1: Video Deep Dive)
Nema14 spec Voron V0.1 @1.7A (OMC 14HS20-1504S) amzn.to/3kBO5tm
F623 bearings instead of toothed idlers amzn.to/2UktSgZ
WD40 specialist dry lubricant for rails amzn.to/3ziGaF4
Gates-LL-2GT 6mm belts amzn.to/3kCaAht
- EXTRUSION*: (Part 2: Video Deep Dive)
Slice Engineering Mosquito Magnum (5% off!): www.sliceengineering.com?p=rkjO5IsbY
VolcoMosq Block (+9mm melt) designed by Nitram: • How did I end up with ...
E3D Hemera (Bowden config) amzn.to/3zdvAzk
Capricorn Bowden Tube amzn.to/3kBrgWE
50W heater (24V) amzn.to/2UmOIwa
PT1000 temp sensor amzn.to/3ivfdY2
Boron Nitride Paste @ heater, thermistor and heat break amzn.to/3kvPem6
- COOLING* (Part 3: Video Deep Dive)
4010 blower fans (24V) on updated toolhead amzn.to/3irazKT
optimized air ducts for part cooling with aluminium tape insulation amzn.to/3zhbuEs
External Static Cooling: 4x4020 fans (24V) amzn.to/3zcap0D
4x40mm heatsink at AB stepper motors amzn.to/3irvLAh
4010 noctua fans (5V) at heat sinks / stepper motors amzn.to/3yaZy6f
25mm axial fan (5V) for stepper drivers amzn.to/3eDf4AW
- Software / Firmware / Controllers (Part 4: Video Deep Dive)*:
Klipper Firmware: www.klipper3d.org/
Raspberry Pi Zero W (Mainsail): amzn.to/3xR9l21
Raspberry Pi 3B (Input Shaping and Octoprint): amzn.to/2UwIMAu
Alternative: Raspberry Pi4: amzn.to/3kBt4io
Simplify 3D, multi processes used: www.simplify3d.com/
-------------------------------------------------------
My modest video gear*:
iPhone 11 Pro: amzn.to/2VZYswJ
Smartphone video rig: amzn.to/3iriub5
GoPro Hero 9: amzn.to/2UZI9Q5
FLIR ONE PRO: amzn.to/2UWAe67
Similar to the soft boxes I use: amzn.to/3xRes2d
Similar to the tripod I use: amzn.to/2V1I6mw
*Amazon links are affiliate links at no extra costs for you!
#247printing
#JoinTheSpeed
#volcomosq
#VzSpeedCube
#SpeedBoatRace
@247printing 2 жыл бұрын
Layer one and layer two are printed slower to build up a base for crazy things to happen! *Video description is updated: A lot of details added!* Make sure to check it out and please comment if you have questions on this project - as usual I try to answer all of them!
@maxbiagi3091 2 жыл бұрын
MONSTER!! "ShtUp and take my momey!!!!""" 😂😂😂😂 where is available ??? 😂😂😂
@247printing 2 жыл бұрын
😂 paypal.com/paypalme/247printing 🙊
@247printing 2 жыл бұрын
Printer basis: Voron V0.0 at vorondesign.com 247upgrades: published soon for free 👍
@MrSpeakerMBurns 2 жыл бұрын
What fan mod are you using to get the fans on the sides like that?
@247printing 2 жыл бұрын
@@MrSpeakerMBurns Hi Jason, these are my concepts/designs I am evaluating at the moment. As soon as I am satisfied, the mods will be explained and provided ☺️
@hobbyelectronix9433 2 жыл бұрын
Me: Lookin at my Ender 3 My Ender 3: “Don’t you dare…”
@247printing 2 жыл бұрын
A million thumps up! Nice one
@Reburned32 2 жыл бұрын
Really good one :)
@247printing 2 жыл бұрын
Come on….
@jasonwoody8041 2 жыл бұрын
If if i try that with my ender 3 i swear a piston would materialize and blow out the electronics enclosure, lol.
@247printing 2 жыл бұрын
@@jasonwoody8041 looking over to my E3………Ran away back to China
@BlueJeebs 2 жыл бұрын
You know the printer is fast when it's playing techno as ambient background music.
@Kalvinjj 2 жыл бұрын
And the print head itself is the speaker
@roundoneusa 2 жыл бұрын
when your printer is literally camellia
@Thetreetroll 2 жыл бұрын
🌲🌲🌲🎯🌲🌲🌲
@travisborges1048 2 жыл бұрын
😂😂😂
@jastnorn 2 жыл бұрын
I keep waiting for the drop.
@mozkitolife5437 2 жыл бұрын
"Oh, some extra filament dripped out while it was warming up. I'll just grab tha AHHHH my fingers are gone."
@eideticex 2 жыл бұрын
@SaltyBrains Dunno about that. The filament cools pretty quickly, can grab it firmly fresh out of the nozzle. Only thing that really burns is that damn heat block, even through a silicone sock it's not just hot but engineered to dump heat into things rapidly, your fingers are no exception.
@second-pair 2 жыл бұрын
@@eideticex Aye, but at those speeds it'll probably slice some fingers off before they even get to the stray filament.
@justincasey9730 2 жыл бұрын
Hahaha
@GantryG 2 жыл бұрын
Now THAT is the speed that 3D printers should be going. Finally hitting the speeds that inkjet printers are in the range of 👍
@247printing 2 жыл бұрын
Thanks mate! Still a long and rough way to go, but I am confident seeing the progress ☺️
@epicipodmodz 2 жыл бұрын
@@247printing seeing this made me giggly like I was a kid. This technology excites me so much it’s very mesmerizing to see it move like that and how fast it builds models. Especially compared to my ender3 😂 very awesome!
@247printing 2 жыл бұрын
I am happy to see this excites you that much! I 100% share this and the best part is: Everyone can do it on a quite budget machine like the Voron Zero! I strongly believe this speed trend will slowly conquer the commercial machines also the next years!
@overlord5066 2 жыл бұрын
This here is perfect example of why proper cable stress relief should be followed on all printers. Imagine how long wiring connections would last without it on this thing !
@G11Marksman 2 жыл бұрын
This is definitely to the point where that printer needs to be incased in an enclosure with a dead man's switch tied to the opening. This thing could take a hand off.. incredible engineering here
@Vilvaran 2 жыл бұрын
Not necessarily - those belts would still flex just enough for the drive pulley to slip, if not just stalling the steppers outright... At worst, it will break your finger (could take off a pinky if it was a freakish accident), most likely it'd ruin the belt and/or the print... But surely, no "assisted printing" is possible here!
@naidta9802 2 жыл бұрын
Crazy fast!! Love it. Keep up the good work!
@247printing 2 жыл бұрын
Thanks mate! Stay tuned for more 👍
@MrRhysMoore 2 жыл бұрын
I love the that speed printing is advancing, some seriously good improvements will come because of it and it will be a good challenge for the community to innovate and collaborate too! Im currently designing my own printer to compete.
@247printing 2 жыл бұрын
The speedprinting community is a blast - four months ago I was stuck to 70mm/s - 100mm/s!
@hanswerner6882 2 жыл бұрын
@@247printing printing 150 with ender 3 stock pla
@mornejoubert8416 2 жыл бұрын
This is unreal! Ideal for printing templates prior to going for quality.
@TheGeordietheWitchandtheWench 2 жыл бұрын
Insane!!!!!!!! Watching the spool turn!!! Want!!!!!!!!!!!
@iPrint3D 2 жыл бұрын
ABS+ at insane speeds....Beautiful.
@cosmiccrunch8591 2 жыл бұрын
That's incredible! Awesome job and 2 thumbs up to Nitram for making this possible!
@247printing 2 жыл бұрын
Thanks a lot and absolutely: Nitram and his Volcomosq were VERY important for this!
@3DLL. 2 жыл бұрын
i love this thing and scary how fast it can go. tempted to build one, have loads of ABS to use too. well done bro awesome video.
@247printing 2 жыл бұрын
Thanks mate! Go for it - the last four months with that little guy were a blast!
@mrdamianopl 2 жыл бұрын
Awesome job!
@247printing 2 жыл бұрын
Thank you buddy!
@naidta9802 2 жыл бұрын
Amazing !!! i love your filming !
@mikaelbackstrom 2 жыл бұрын
Would love to see it print something else but just a rounded rectangle wall. Amazing speeds.
@247printing 2 жыл бұрын
Incoming! I’ll be showing off some stuff with focus on quality at speed ☺️👍
@10magicalfingers27 2 жыл бұрын
@@247printing the world awaits. I personally love to watch it print PARTS for something.. With good quality and speed.. Id watch it 24 7
@247printing 2 жыл бұрын
I made another test print yesterday evening. Printed a functional part (RPI holder for the Voron Zero). Max speed at 1000mm/s. What I have seen so far: 😳 this is real rapid prototyping. Around 15min for a full functional part (length 11cm) at 0.1mm layer height. Preview this evening on Instagram!
@10magicalfingers27 2 жыл бұрын
🤤🤤🤤🤤🤤
@pirobot668beta 2 жыл бұрын
Don't discount 'easy prints'! Smooth walls, consistent feed, even line-width? Five Stars all the way!
@antoniorios3856 2 жыл бұрын
Thats a cool printer, I like the fan ducts on the side of the print bed
@DarshanRayate1 2 жыл бұрын
Awesome speed Printing 👌🤩
@ristopaasivirta9770 2 жыл бұрын
This is what everybody thinks 3D printing looks like. Well done!
@247printing 2 жыл бұрын
Thanks mate! Let’s hope this will be the standard at some point or we get some revolutionary tech from the aliens 😂
@ristopaasivirta9770 2 жыл бұрын
@@247printing I am convinced humans have already gotten two technologies from aliens: the synthesizer and the kaleidoscope :D
@angst_ 2 жыл бұрын
The bronze color is nice and the brown belts are a nice touch.
@247printing 2 жыл бұрын
Thanks a lot! Fell in love with this ESUN ABS+ brown :)
@JohnWhitehurstNX01 2 жыл бұрын
Man that printer sure knows how to drop the beat too....
@luke2642 2 жыл бұрын
Nice. Subscribing so I don't miss that video series! Looking forward to the benchies and the deep dive series!
@247printing 2 жыл бұрын
Thanks buddy, I hope it will be up to your expectations!
@headfog7621 2 жыл бұрын
Wow that's what I've been wanting.... subscribed 🤟
@247printing 2 жыл бұрын
I thank you very much!
@rkaidia 2 жыл бұрын
From the original cupcake cnc to speed running the benchy, my how time has flown
@thetrcg 2 жыл бұрын
Waiting for this to be remixed into a techno edm bop
@CyrusDemar 2 жыл бұрын
That is absolutely amazing! I went from "Yeah that's a pretty fast bottom layer!" to "What the f***********!" I'm amazed that the ABS even had time to shrink enough to have a little lift in the front left corner. Can't wait to see what the future brings.
@247printing 2 жыл бұрын
So nice how you describe your experience of the video! Thanks a lot, thought a lot about how to make it half way watchable ☺️
@CyrusDemar 2 жыл бұрын
@@247printing You did well! Like... Really well. :-)
@247printing 2 жыл бұрын
Thank you so much! ☺️
@bagoston325 2 жыл бұрын
When it started doing the base layers I was like okay that's fast what But when it started doing the layers after that with the "infill go brr" I started laughing. I have never thought we're gonna reach this level in such a short amount of time but here we are. You, dear sir, are a madman. Thank you.
@247printing 2 жыл бұрын
I thank you so much for this awesome comment!
@maximum231 2 жыл бұрын
Hi ! The quality seems to be very good considering this speed ! Can not wait to see more "difficult" pattern's ! Keep experimenting, it's a feast for the eyes (and ears) ! :)
@247printing 2 жыл бұрын
On my Instagram there is a little preview of a complex design printed at that speed - full video incoming ☺️
@boasdelely1550 2 жыл бұрын
I need to see a benchy at that speed!
@247printing 2 жыл бұрын
There are fast benchies on my channel (this printer still at original specification). A faster one on the upgrades will follow (sub 4min.)!
@dekurvajo 2 жыл бұрын
It will looks like a speedboat
@247printing 2 жыл бұрын
@@dekurvajo Quality PLA Benchy (almost!) flawless: 7 minutes. Dang, so many videos incoming 😬
@kerbodynamicx472 2 жыл бұрын
That's why I like Vorons. Not only do they look cool, they sound like techno-rock while printing t full speed!
@nelsondisalvatore9812 2 жыл бұрын
That thing is flying!
@eastonjanecek9802 2 жыл бұрын
Love the BTT ducks
@MrButuz 2 жыл бұрын
Man your inspiring me to get one of these next year! :D
@247printing 2 жыл бұрын
Do it! Loads of fun to work with it 🤩
@MrButuz 2 жыл бұрын
@@247printing Shame the delivery estimate is February for an LDO kit. It'll be worth the wait though!
@ikmalxhakim4419 2 жыл бұрын
Print quality at that speed was better than my printer at 25mm/s😢😢😮
@akura2 2 жыл бұрын
those layers are hella smooth tho... dang!
@oliverwhite2031 2 жыл бұрын
Omg speeed that moves so fast!!!!
@themiddleman9376 2 жыл бұрын
I thought this was sped up!! Only realised this was 100% real speed when I saw the timer!! Hatte off for you
@247printing 2 жыл бұрын
Thanks mate!!!
@juschu85 2 жыл бұрын
I'm pretty sure that also improves inter-layer adhesion. The filament doesn't have much time to cool down and get solid before the next layer is applied. So you can make much more sturdy and usable prints in vase mode.
@michaelcerniglia1604 2 жыл бұрын
It's the other way around you want the layers to cool down at least a little before the next later is applied
@juschu85 2 жыл бұрын
@@michaelcerniglia1604 But why? I would expect molten plastic to stick better to other molten plastic than to solid plastic.
@Micington 2 жыл бұрын
Awesome work mate! Can you do a difficult shape on one of your next videos? Man! That extruded must have some good grip!
@247printing 2 жыл бұрын
Thanks mate! Yes, I am working on some upgrades and a complex print at that speed will be done soon! Preview video on my Instagram.
@ZenMuff1n Жыл бұрын
-can you print me a phone case -yeah. Just give me a few seconds.
@rushildasari7502 2 жыл бұрын
this is like the baby of inkjet and 3dprinting
@koreaquirks7300 2 жыл бұрын
Awesome.
@MatterLabz 2 жыл бұрын
Just wow!
@oorangejuce 2 жыл бұрын
Superb!
@247printing 2 жыл бұрын
YOU are SUPERB :)
@KeithOlson 2 жыл бұрын
The speed is *mindblowing,* but then you notice how high the quality is and reality completely breaks down.
@247printing 2 жыл бұрын
It’s quite ok for that speed - but right - it’s way better at 800mm/s 😬
@b3bs 2 жыл бұрын
Holy Moly! 😮
@Yngwiejmalmsteen08 2 жыл бұрын
That’s great I’m buying one without question
@beebees3d 2 жыл бұрын
That’s insane but awesome
@AuthenTech 2 жыл бұрын
Insane! I’ll take one please 😁
@247printing 2 жыл бұрын
Hey Ben, I can recommend to build one: Lot of fun, a lot to learn and a great result :)
@alivevilaalivevila6665 2 жыл бұрын
awesome
@Liris777 2 жыл бұрын
Nice!
@TechBuild 2 жыл бұрын
Great to see this printer printing at such high speeds. Have you tried printing other shapes and structures at the same speed?
@247printing 2 жыл бұрын
Thank you! Please have a look at my Instagram - there I have a crazy preview on this ☺️
2 жыл бұрын
While I was watching the video, my Sidewinder X1 started crying softly in the corner...
@gunsmoke132 2 жыл бұрын
Eh, the sidewinder is built for a different purpose. It has strengths over this printer. Speed just isn't one of them 🤣
@247printing 2 жыл бұрын
@@gunsmoke132 true, but I can only find one: Build volume ☺️👍
@emileballard4417 2 жыл бұрын
WAUW!!!! realy impressive man! i realy like the cooling fans on the side realy good idea. my printer also can get this fast but the extruder motor/hotend cant haddle it. need to step up my game.
@247printing 2 жыл бұрын
Thanks a lot! That's truly the challenging part here... Getting motion, extrusion and cooling done :)
@bowieinc 2 жыл бұрын
Amazing, I was hoping you’d show the spool feeding out and you did:)
@247printing 2 жыл бұрын
It seems many people like to see that 😬 Thanks!
@4Abaddon4 2 жыл бұрын
Insane
@mag_rag3504 2 жыл бұрын
Printer goes Brrrrrrr :D
@samrob52 2 жыл бұрын
Hot end 310. Wow. Epic.
@thenamelessone123 2 жыл бұрын
@247printing This is fantastic, we definitely need to see the finished prints for every video you do, it feels incomplete just seeing it mid-print!
@247printing 2 жыл бұрын
Very true! I try to do better the next video (complex model to print).
@wastedwizard5112 2 жыл бұрын
Looking at this, we need to find a way to make printheads lighter. If we manage to put more components onto the frame and move less weight in the axes, higher speeds with less frame flex would be possible...
@247printing 2 жыл бұрын
Absolutely, exactly this! I am working on radical measures for weight reduction - first tests on Instagram ☺️
@D3ltaLabs 2 жыл бұрын
That's insane fast
@Rouverius 2 жыл бұрын
Seriously, this looks almost like a time-lapse.😲
@rodrigomartinelli741 2 жыл бұрын
@0:43 nice of your neighbour to turn on the lawnmower right when your making a 3 minute video
@247printing 2 жыл бұрын
Haha yeah! :D
@SirLANsalot 2 жыл бұрын
I don't doubt larger printers could do this, as what really holds back a printer form printing faster is the extruder itself unable to feed fast enough. Upgrading the parts like the belts for the printer head and the bed would also be needed. Case in point, I have twin Nep-Nep 2's from Elegoo, and I run the prints at 80mm and have had zero extrusion issues or layer issues during printing (200/60) using Hatchbox PLA. Edit: One thought also that might be an issue for bigger printers is the print bed also has to move at that speed, and if you use a Glass bed, it will be too heavy to try and make those quick snappy movements and would most likely break the belt. On this printer he has in the video, you can see the bed doesn't move and is only responsible for the Z axis movement, X and Y are only the print head moving which is much lighter.
@247printing 2 жыл бұрын
Hi John, larger printers could do that, but you have to deal with the weight of the moved masses. Here we are on a CoreXY motion system, which is nice (but maybe not the best) for going fast. Bed slingers can be tuned to be fast, but they have their very own downsides in order to so - like you mentioned. It can be summed up quite easily: In order to go fast(er) on any printer you have to deal with the motion-system (including the frame stiffness), the extrusion-system, the cooling-system and you have to tweak/handle the firmware/slicer accordingly. It all depends from each other. I worked on all of those aspects mentioned and this preview is a result for the tuning measures. Concerning your example on the Nep-Nep 2's: Besides the material it depends on the layer height, line width and the max speed of your print settings, if your hotend can handle the extrusion. 80mm/s at a common 0.2mm layer height and around 0.4x perimeters are no big challenge. You can calculate quite easily if your settings are out of range for the extruder/hotend you are using - unit is [mm³/s]. In this video: 0.1mm layer height, 0.4mm perimeter and at 1000mm/s results/demands a peak (~continuous) flow of 40mm³/s, which is quite the limit for my hotend combination (Mosquito Magnum with extended custom heater block). For comparison: An E3D V6 is at around 10 to 15mm³/s, where most of commercial printers range atm. Thanks a lot for watching and commenting!
@SirLANsalot 2 жыл бұрын
@@247printing I have managed to get .05mm layer hieights (the lowest an FDM can do) and have pretty much left it at 80mm for almost anything I do now. I could sit and tweak it and probably push it to 100mm but ghosting starts to become an issue with the bed. I hope to get my hands on a Neptune X when Elegoo starts making more. The X is, of course, a copy of the Ender X and is an X/Y printer, bed never moves except for handing the Z. So with those and a tuned extruder you could probably get some crazy speeds well above any bed slinger type could dream of. Still a fun crazy vid LOL.
@raeliean Жыл бұрын
Loving these videos. Can you push it to failure? 1200mm/s , 2000 mm/s, 3000mm/s. Might come out terribly - but seeing which parts are failing and where improvements need to be made to achieve those speeds would be very interesting.
@Vslot 2 жыл бұрын
Wow 🔥🔥👌
@247printing 2 жыл бұрын
YOU are wow!
@DejanGjorgjevikj 2 жыл бұрын
Printing ABS semi-openframe with fans blowing hot air form both sides at the hotend level... at this speed. Nice.
@247printing 2 жыл бұрын
Thanks mate! But it's actually ambient air for cooling from the sides - The print is so fast that internal stress or warping don't have a chance - the part does not cool down fast enough :)
@HyperMakes 2 жыл бұрын
Me: Wait, it's one of the best Voron V0's out there in the world? 247printing: Always has been 🔫🙂
@247printing 2 жыл бұрын
I was thinking about your comment for some days… and… I am convinced now: It is.
@ligangt85 2 жыл бұрын
amazing！ Just it
@ichthusstudios3585 2 жыл бұрын
WOOOOOOWWW!!!!
@dragonfist 2 жыл бұрын
high quality benchy without any issues and fast - WHEN???
@247printing 2 жыл бұрын
Very soon!
@johnroyal4913 2 жыл бұрын
Wife at 2:00am “What in the hell is that noise!!!?!?!??”
@247printing 2 жыл бұрын
oO, don't wake up the wife at 02:00 with machine noise :D
2 жыл бұрын
Duck pool 😊
@247printing 2 жыл бұрын
This time: A fence ☺️👍
@aeropacio 2 жыл бұрын
this is totally insane
@zelder12 2 жыл бұрын
If theres not already there should be a competition to see who van get the fasted and best quality prints on the voron printers
@247printing 2 жыл бұрын
Competitions like you mentioned should have a quality focus - I fully agree! Have a look at the #VzSpeedCube challenge - I’ll make an entry!
@Puzzlers100 2 жыл бұрын
I'd love to see this upgrade do the speedbenchy again, once you are done with the mods
@247printing 2 жыл бұрын
Two of them incoming: Quality (PLA)
@SkyCandyVisuals 2 жыл бұрын
🤓Holy smokes and I was excited about my ender 5 plus 🥴 well looking up this thing now...
@mistaecco 2 жыл бұрын
I love my prusa, but daaaaaaamn - I think I gotta start planning out A voron BOM
@247printing 2 жыл бұрын
My MK3S+ still is my favorite printer even though it’s slow - great over all experience!
@bassam.2023 2 жыл бұрын
I'm deviant enough to have been turned on by this video. Can't wait to build my own! :)
@VectorGameStudio 2 жыл бұрын
Tell us what you modified 😬😵💫
@247printing 2 жыл бұрын
I’ll add all the information in the description as soon as I get my hands on a PC ☺️👍
@starscreen.202 10 ай бұрын
This will never be possible on my cr-10 v2; initially, I was skeptical, but it's a fantastic printer.
@Mr.Mister001 2 жыл бұрын
Wow... Subbed
@247printing 2 жыл бұрын
Thanks a lot Sir!
@jesselindberg4473 2 жыл бұрын
Nice speed
@jimviau327 2 жыл бұрын
I want one like that Mom !
@czuowiekwiadr0 2 жыл бұрын
so fckng awesome :o
@247printing 2 жыл бұрын
You are awesome! Thanks for commenting and liking 😘
@vincenemeth6522 2 жыл бұрын
POV: you ordered something at 23:59 with same day delivery.
@Mobile_Dom 2 жыл бұрын
with how easy it is to make my nema14s on my V0.1 skip at normal speeds id be worried to breathe near that thing!
@247printing 2 жыл бұрын
I am actually wearing a full face mask while recording this ☺️
@Lucas_sGarage 2 жыл бұрын
why? i dont get it
@joesephrodrigues 2 жыл бұрын
@@Lucas_sGarage nema 14's arent high power jobbers
@247printing 2 жыл бұрын
@@Lucas_sGarage I am allergic to the ABS fumes and it protects my eyes from maybe parts flying around ☺️👍
@evanbarnes9984 2 жыл бұрын
THIS. Fuck yes, THIS is what 3d printers should be! None of this 40mm/min bullshit that my old CR-10 does
@raeliean Жыл бұрын
@247printing it seems the infill path may be causing some unnecessary slow-down here, where just doing a perimeter pass 3 or 4 times would be faster than the back and forth shaking. On some of your other videos as well - I think slicing needs to be overhauled for high speed printing as current slicing wasn't made with those kind of kinematics in mind.
@yojimbo2821 2 жыл бұрын
that toolhead design...i want it
@247printing 2 жыл бұрын
Delivered soon, for free, at 247printing ☺️
@007JAKICA 2 жыл бұрын
this could potentially print a vase in less than 10 minutes. Just wow.
@247printing 2 жыл бұрын
Thanks a lot! Yes there is a lot to try out at that speed!
@SiriusXification 2 жыл бұрын
Oh man, voron's so fast it doesn't even go Brrr
@danz409 2 жыл бұрын
printer go burrrrrr!
@nazariimoroz6216 2 жыл бұрын
I can't wait for you to make an in-depth video on your printer upgrades, are you planning to make one any time soon?
@247printing 2 жыл бұрын
I am working intensively on my first “real content” here: A series of four videos explaining Motion, Extrusion, Cooling and Software/Firmware in deep: “The Deep Dive to Speedprinting”.
@Niohimself 2 жыл бұрын
pre-ordering videos isn't even a thing but I would totally pre-order that one.
@247printing 2 жыл бұрын
@@Niohimself Thanks buddy, same for me: I never pre-order! Please have a look at my channel trailer - here I tried to promote "The fastest Voron Zero" in a cinematic way. Maybe you like it. My designs for the Voron Zero will be available for free as soon as they are 100% tested.
@SD-xo3im 2 жыл бұрын
@@247printing That would truly be awesome for a beginner like me!
@rickkeys2345 2 жыл бұрын
@@247printing please make the videos fun, not long and boring
@FoxSock 2 жыл бұрын
thats it im building one of these
@sleepy-monax 2 жыл бұрын
Printer goes brrrrrrrrr
@SilkyWayFPV 2 жыл бұрын
holy f... I want this thing
@chzbrgla 2 жыл бұрын
the only thing faster than that, is me, smashing that like and subscribe
@247printing 2 жыл бұрын
Dang thank you, that gives me honest goosebumps reading this!
@deathcube2006 2 жыл бұрын
Thats a well tuned printer, congratz. I wonder what speed would it be possible with a thicker filament
@247printing 2 жыл бұрын
Thank you very much! You mean 2.85mm filament?
@ThePowerfox18 2 жыл бұрын
Bigger diameter needs longer to heat up. I think as long as the extruder can keep up a smaller diameter is better
Immersed
Рет қаралды 33 МЛН
Oscar's Funny World
Рет қаралды 13 МЛН
Matt The Printing Nerd
Рет қаралды 8 М.
Made with Layers (Thomas Sanladerer)
Рет қаралды 621 М.
diy chen
Рет қаралды 631 М.
KOMPUKTER
Рет қаралды 32 М.
JOON Italian
Рет қаралды 480 М.