1025r: Your Forks Are Lifting Me Higher

Рет қаралды 38,689

Күн бұрын

I explain why I picked the Frontier AP10F 42" pallet forks. The purchase helps me finally see if my vision is a fail or success when combining it with my carryall.

Пікірлер: 53

@qfdforme 4 жыл бұрын

Very good video. After researching fork lifts I have decide on the 36” Frontier forks as well. Artillian are nice but ridiculously priced when shipping is added in. The front loader work platform requires a delicate touch to the hydraulic controls. Plus, a hydraulic failure could be scarey. Thanks again for your well done video. Bill

@1rustytree 4 жыл бұрын

They are great! My neighbor showed me the one he made several years ago, and I built one that since rotted out and I just got done with the new one all treated this time!

@wlsteffen 4 жыл бұрын

I like your idea of using your tractor and the tote to get the height you need to get the projects done safely. Thanks for the useful video. I wish I had your foresight!! Wayne from Wisconsin!,

@ataleofthreecabins1025 4 жыл бұрын

Stay healthy Wayne!

@deeremt9532 4 жыл бұрын

Love the idea for the carryall. A set of pallet forks has some many possibilities.

@motorzeit24 4 жыл бұрын

Another great Video! I guess you made a very good choice. These forks are way better than the clamp on. Thanks for sharing!

@jerryhoover4698 4 жыл бұрын

Thanks for the idea. I built one and love it.

@hphillips7425 3 жыл бұрын

I agree about the clamp on forks. The worst implement I ever purchased

@benc.7446 4 жыл бұрын

Another nice video. Glad you got the forks, I know the clamp on ones are less expensive but limited in use. Forks are a must haveI for a tractor. I use my forks as much or more than the bucket

@ataleofthreecabins1025 4 жыл бұрын

Looking forward to seeing how much I can more I can do with them.

@shawnboss5542 4 жыл бұрын

Nice team work and great idea !!

@tycanavan3705 4 жыл бұрын

FYI, there is a sweet spot on the joystick that you can lift and curl/level at the same time so you don't have to tilt down so drastically on each sequence. It is splitting travel in half or diagonally lifting to the right/left depending on lifting or lowering.

@LongBinh70 4 жыл бұрын

CPR is currently being performed on quarantined OSHA inspectors all over the country! 😁

@garrytalley8009 4 жыл бұрын

OSHA is a joke. They announce when they are coming and companies let their employees know before their inspections. They never inspect anything randomly and seldom find a thing.

@hartleyhomesteadmichigan6041 4 жыл бұрын

Forks look like a good addition!

@coffeebert6644 4 жыл бұрын

Thanks for doing the review I looked at the artillian forks as well and then choked on the cost of shipping them I think I will be calling my jd dealer up as well

@joshritz9823 8 ай бұрын

That was brilliant, very good idea thanks for sharing

@mikebreazeale2563 4 жыл бұрын

Great video as usual. Thanks for sharing...

@medic4076 4 жыл бұрын

As a fellow Firefighter may I suggest a seat harness at minimum with a couple of carabiner (real ones) and a short piece of 1/2 inch kermantile rope for a little fall protection. Maybe throw in a hard hat. Stay safe brother.

@coder010 4 жыл бұрын

I paid quite a bit more for my artillian 36” forks. Nice job, thanks for sharing

@martineastburn3679 4 жыл бұрын

I created a 4x8' pallet using Yellow wood 4x4 and some 2x6 oak. The tines of my pallet forks fit into long boxes and I built it on the forks then turned it over and mounted the board. It is useful to haul long limbs and a bunch of brush as well as anything else I can put on the pallet. It is heavy, so I don't put it up high. Nice video.

@garrytalley8009 4 жыл бұрын

You must have a tractor with a lot of lift with all that weight.

@coxlawncare6492 4 жыл бұрын

Another great video!

@outdoorswithlarryrobin 2 жыл бұрын

Forks and operator work well🚜🪵🇺🇸

@flash1034 3 жыл бұрын

FYI. Artillian stuff is made in the USA with USA steel. The other options you listed are from China.

@jamescochran8509 4 жыл бұрын

Put candle wax on fork rails to make them slide left and right easy.

@edsmith4414 3 жыл бұрын

Thing I don't like about the JD forks is the lack of a 'back rack' on them. Most pallet forks come with a high enough rack on the back that you can tip things back onto the tractor hood (or in your lap) if you tilt them backward while up higher. Folks should also be aware John Deere uses a proprietary quick attach deal on their loaders that only works with John Deere stuff. (The reason you HAD to deal with JD dealer on those forks) Most other tractors have gone to SSQA (skid steer quick attach) setup on their tractros, and there is a world of aftermarket attachments set up with that standard.

@ashlandgunclub1000 4 жыл бұрын

Farm equipment dealers are open, they fall under the war powers act. Seems like my forks are used more than my bucket.

@jeffpape2501 2 жыл бұрын

Very helpful video, thanks! Has anyone considered using an IBC tote cage with a plywood bottom on forks for this kind of work?

@Retarded229 Жыл бұрын

I use one it has a heavy duty plastic pallet so no need for plywood

@miketaylor819 4 жыл бұрын

Wanna go a little higher? Flip those forks upside down. It’ll take some trickery getting the carryall on but you get what I’m talking about. I’m pretty sure ttwt did this in an episode?? Can’t remember but I do it with my titans occasionally. Your gonna love those forks!!

@genedameier8746 3 жыл бұрын

Can you make a set of plans for your box lift attachment ? Incl a lumber and hardware list. Post it with a future video. If you can, Thank You.

@ataleofthreecabins1025 3 жыл бұрын

Here's how I put mine together. kzfaq.info/get/bejne/fb9_q8t22qu2eoU.html

@kadenwrobel8488 4 жыл бұрын

I am very interested in buying your clamp on forks

@tfknauss 4 жыл бұрын

Like it.

@kubotaforever9453 4 жыл бұрын

I noticed when you were trimming your tree that you got your gas service located. You guys planning some excavation work soon?

@ataleofthreecabins1025 4 жыл бұрын

When the weather is right, I'm going to try and run some underground romex to my shed. Going to try using a subsoiler mounted on the tractor. I have a gas line and sump pump drain to contend with.

@kubotaforever9453 4 жыл бұрын

Wow! That would be a fun project to watch! Don’t forget your KZfaq audience for that one😂 Great videos by the way! I blame you and tractor Tim for making me sell my bx and want a 1025r, I prob should change my name soon lol Thanks again for your 🎥

@genedameier8746 3 жыл бұрын

@@kubotaforever9453 , TTWT also has a "Kenny" Kabota. I haven't bought my tractor yet. Leaning toward a 2025. Been described as a 1025 on steroids. Also a series 1 1/2. Larger but not the big frame 2 series.

@michaelchadwick3497 4 жыл бұрын

Just wondering, why do you travel with your backhoe boom offset to one side?

@ataleofthreecabins1025 4 жыл бұрын

Mostly to get my shed door closed when I put it away it need to be in that position.

@suqmadiq68 2 жыл бұрын

If you're working in tight spaces, it reduces overall length by quite a bit.

@kevinashby3784 3 жыл бұрын

I. Would do that on my 50 hp. But nit a lawn tractor like that.

@suqmadiq68 2 жыл бұрын

Well, if the wife was ever interested in getting rid of you......

@jlp186 4 жыл бұрын

Isn't that a grapple on your shelf already lol

@ataleofthreecabins1025 4 жыл бұрын

It's a Brush Crusher. No third function needed.

@travelinthru9519 3 жыл бұрын

If you're going to talk during a video shut the damn music off

@ataleofthreecabins1025 3 жыл бұрын

Sorry, I use the music as the drone does not record audio and if there were audio problem during non drone footage. I usually spend a lot of time mixing the sound so it stays level and not over bearing. Take Care, Tom

@timsawyer7443 3 жыл бұрын

I'm not a great fan of the music myself, but it was tastefully done, and certainly not as offensive as your VERY smart-alec comment. Suggestion as you're "Travelin Thru" -- try being nice.