10HP Mini Quad THRASH + Top Speed Test!

Рет қаралды 1,481,775

Күн бұрын

We put a Tillotson 10HP 212cc engine on the smallest four wheeler we've ever seen, and it's a total death trap! Ike takes the quad off road, does wheelies, and we do some top speed runs. It's top speed is relatively low, but it feels very fast because it's so light!
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: bit.ly/3T8njaF
----------------GO POWER SPORTS PARTS IN TODAY'S VIDEO---------------
Tillotson 212cc engine: bit.ly/2Y8DFU6
Stage 1 performance kit: bit.ly/2YatrCP
Split sprockets: bit.ly/2TWGPv4
Engine mount: bit.ly/2Jry5sU
Go Power Sports: bit.ly/3QKyODE
NEW MERCH: www.cars-camera...
Equipment we use: www.amazon.com...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Пікірлер: 1 200

@tomframeli8579 5 жыл бұрын

Stretch it about 2 1/2 feet, widen the rear end and put a little larger sand tires on it. Also, at least stage 2 on the engine. Love the content of the channel guys. Please keep up the great work.

@DeliciousDeBlair 5 жыл бұрын

I agree! Stretch the back end like a mountain rail or a drag bike! (~_^)-b

@lcbcreation8205 5 жыл бұрын

Yes you know what's up

@joeofloath 5 жыл бұрын

I had a similar one and stretched it. Loads of fun!

@thedude738 5 жыл бұрын

This is exactly what I was thinking too, I'd love to see them do this!!!!!

@BuzzLOLOL 5 жыл бұрын

Should do 65 MPH as is... too fast for that sketchy little thing... and no brakes?

@krudlumpstv7854 5 жыл бұрын

3 minuets and 45 seconds into the video John has the biggest voice crack 😂

@faresalsalahi9764 3 жыл бұрын

lol

@CarsandCameras 4 жыл бұрын

The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY. Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

@jakechunasamy9642 4 жыл бұрын

CarsandCameras can u tell me what that atv is called I want one

@redneckcreations1715 4 жыл бұрын

How much do you want for that little quad I want it

@jakechunasamy9642 4 жыл бұрын

Retro Vlogs he sold it

@briangoscinak9725 5 жыл бұрын

Laughed when I saw the neck brace. Spit out my drink when I seen the back brace lol

@Nate-ev6sg 4 жыл бұрын

Imagine these guys on a banshee

@loonycustoms44 5 жыл бұрын

I think you should make an extended swing arm on the back and wheelie bars, tune it up improve the handling and use it at busco beech. Absolutely love what your doing guys keep it up!

@572chevybb 5 жыл бұрын

Don't forget independent front suspension

@CPOKAY2 5 жыл бұрын

+1, lengthen the frame out back, then it’ll take the power

@antwerx 5 жыл бұрын

+1 Come on guys extend the swing arm!

@alinazalewska1543 5 жыл бұрын

Njj

@calebkissinger5451 4 жыл бұрын

yeah get this thing to busco:0

@MrImpalaRider 5 жыл бұрын

Jon’s scared to death of all 19 mph from that little thing. You can see it in his eyes when he’s talking about putting it up 🤣🤣

@gavinjones9051 5 жыл бұрын

Build a trailer so you can pull the quad behind the monster truck. Lol

@Geequed 5 жыл бұрын

Extend the back end , widen the back axle, put beefier tires in the back, maybe a single shock (dirt bike style suspension) and highten the handlebars....maybe with a steer damper. Would be a beast...kinda like one of these dune/drag racing ATV:s. Greetings from Northern Sweden! Thanks for years of great entertainment, as always keep it safe but have fun!

@austinliveoak1018 5 жыл бұрын

I believe when the chain popped off when doing the burnout, the axle actually popped forward. I would check into that. That could also be some power and speed loss.

@comptongokartracing3426 4 жыл бұрын

Austin Liveoak I saw that

@thedoerofthings493 3 жыл бұрын

It doesn't need anymore speed lmao

@barschcollin3298 5 жыл бұрын

Love ur videos, been watching almost since the beginning

@DirtGearTv 5 жыл бұрын

I so love your business model John! Not only do you get to work on crazy projects with your best bud, but one can film the other no solo camera shot setups! 😆

@richardoconnor7162 5 жыл бұрын

You forgot to ask John to hold your Beer while you tried to go through that mud....LOL

@cheriesteiner2326 5 жыл бұрын

I think y'all should stretch and widen plus full independent suspension on the deathquad, just my opinion, love y'all keep up the good work, I've been watching for years.

@smil3y_tv363 5 жыл бұрын

Love you guy’s ❤️ You guys Really inspire me on building homemade go carts and I really learned a lot thank you guys for everything

@driveitbreakitfixit7496 5 жыл бұрын

Smil3y_ TV to bad they get all there parts for free

@TheDominos1 4 жыл бұрын

Damn it you guys made me purchase a Mini Bike and relive my childhood! How absolutely wonderful you guys are. My mini bike childhood days were like most boys the very best days of my life.

@rayscyclesrepairs3516 5 жыл бұрын

“BILLY POP THE CLUTCH” 🤣🤣🤣@ 2:53 Great videos guys!

@greenwizard2000 5 жыл бұрын

2:50 that looked like a move straight outa some trials gameplay Ike did there! xD

@playinwithfirecustoms7954 5 жыл бұрын

Extend the swingarm, build some suspension, and widen it...c'mon guys, don't give up on the wee Beastie!!

@dustinmiller7278 5 жыл бұрын

Wouldn't be so wee if you make it bigger

@allthoseclips582 5 жыл бұрын

Giant tires, longer wheelbase :)

@dalejackson5003 5 жыл бұрын

QUIT COMPLAINING JON this is perfect

@evhexrc1765 5 жыл бұрын

You wanted us to come up with ideas for you to do... 1) put a Honda GCV160 5.5hp engine from a MOWER(yes, vertical shaft- all you have to do is rotate the carb/intake/relocate gas tank) onto a bicycle 2) put a Honda gcv160 5.5 vertical shaft engine from a mower onto a go kart 3) put a chainsaw engine or weed eater engine on a longboard 4) make a dual predator 212 powered tandem bicycle (that way you don’t have to “rockpaperscissors” for who gets to ride first) 5) swap some of the predator 212’s you have on your builds with predator 420’s ***note: the Honda mower engines are things you can easily get for free on Craigslist. I have one that I’m happy to do a project with you guys if you want. I live in NC probably under an hour away from you guys and have major ties with Elon. I emailed you and you never responded:(

@xray111xxx 5 жыл бұрын

YOU GUYS ARE INSANE!!!! Don't stop. loving this!

@H3adcrash 5 жыл бұрын

I quite like this concept of an engine on wheels, haha.

@ProMotoo 5 жыл бұрын

Put REALLY wide slick go kart wheels and an extended swing arm on it. It Will be a beast

@chazrobertson1990 4 жыл бұрын

Would be cool to stretch the kid 4 wheeler and put bigger tires on it...and you guys are awesome

@piratepete-thetruthisforevery1 5 жыл бұрын

* Correction * Its a MINI trench digger! LOL! BUT only in semi-dry conditions... 🤣 Note to self... Melted rubber burns! Thumbs up! 👍🏼

@bruceminnier2936 5 жыл бұрын

The VW was the "Harlequin Golf"

@dustinmiller7278 5 жыл бұрын

Wasn't just the golf they also made a Jetta and a shirocco of the same year I have videos of the Jetta version from a car show in Washington (all factory paper work with it was a real deal)

@taylordarr3 5 жыл бұрын

@@dustinmiller7278 negative. Only the mk3 golf was OEM harlequin. If someone did it to a jetta, it was after leaving the factory. Also, it's "scirocco".

@KodiTufo 5 жыл бұрын

@@taylordarr3 it was a dealer thing. Not a factory thing

@taylordarr3 5 жыл бұрын

@@KodiTufo incorrect. The vehicles were completed in 1 of 4 colors and then assembly personnel disassembled and refitted the panels on different colored cars.

@JoshTHankins 5 жыл бұрын

@@taylordarr3 there was also a MK5 rabbit. I have never seen on in person, but the commercial from 2006 has one in it. kzfaq.info/get/bejne/mJxoetBmvpzehHU.html

@drewtooker4243 5 жыл бұрын

Stretch the rear end to make it wheelie less. Maybe move it 8 inches rearward

@taylorschlichmister9487 5 жыл бұрын

also change the rear sprocket gearing

@buridanjwh 5 жыл бұрын

this, and maybe widen it by a few inches. the rear axel should be about 8 inches behind where your butt is. and then you should be able to put some shocks on it.

@bev2423 5 жыл бұрын

Backword 🙄

@Nograc_ 5 жыл бұрын

@@bev2423 backward

@hunterrrwlodarczyk476 5 жыл бұрын

@@bev2423 backward*

@Charlie-yh9wz 4 жыл бұрын

I have been watching since u guys had 17 thousand subs

@shockwavemikey64 5 жыл бұрын

Extended arm and weights on the front. Best of both worlds.. I feel like this is the drag quad everyone deserves.

@frunzoiu 5 жыл бұрын

Extend the wheel base. so you can seat more properly on it

@gmanshackshack6822 5 жыл бұрын

move those back wheels back... even just 6 inches

@redneckhb1494 5 жыл бұрын

I agree, on street bikes even just 3 inch stretch kits help with the wheelie control

@mikecarson4625 5 жыл бұрын

Maybe add some pegs over the front wheels, it might keep the front down and make a better ride.

@kylearruda1041 5 жыл бұрын

Good idea but might be easier to start from scratch

@allthoseclips582 5 жыл бұрын

@seanchastain9801 5 жыл бұрын

Put a wheelie bar on it.

@lilporno6583 5 жыл бұрын

Sean Chastain ok

@tazyt3388 5 жыл бұрын

Woohoo what a little monster keep em coming we luv it

@1hipcrip771 5 жыл бұрын

Bahahaha! It sounded just like your intro when tried to fire the motor in the mud!

@Steve_Just_Steve 5 жыл бұрын

I'm telling you guys EXTENDED SWINGARM! And bigger tires, Make that thing rideable!

@LeoTonius 5 жыл бұрын

It'll mess up the whole idea.

@Steve_Just_Steve 5 жыл бұрын

@@LeoTonius The idea of what? Scrapping the project because it's "too dangerous" and not rideable? F that idea.

@trecedaves3159 5 жыл бұрын

Stretch that rear section and make a baby hill climber. That would be sketchy as all get out and a fun show!

@samsgarage1716 5 жыл бұрын

Super cool Mini Atv.I put a 212cc on a kids little dune buggy and that thing rips.Great job guys

@dude_mccallaster 4 жыл бұрын

I don’t know why I’m so intrigued by this damn bike I’ve watched like every video on it, cool build guys.

@yettidoggzumii1581 5 жыл бұрын

It's Adorable.. 😅😋 You guys should rig up a Crash Test Dummy to ride that thing.. 😎

@jacobsebastien3910 4 жыл бұрын

Lol

@jacobraydesign 5 жыл бұрын

poor truck has a flat tire :( lol great video. can't wait to see that truck on the road

@deathmalice256 5 жыл бұрын

Thanks for the inspiration guys. I'm in the process of building a 212cc apc electra chopper.

@chandlerrohl1014 5 жыл бұрын

Nothing beats to see pure fun than a grown ass man on a little atv.

@TheLoneWolf1124 5 жыл бұрын

Haha it looks like your riding a 1/5th scale rc car.

@gunner8709 4 жыл бұрын

Yea

@crusader1945 4 жыл бұрын

I would say 1/4 scale but yea

@maximumrpmrc2312 3 жыл бұрын

It dus

@TuckerBlack 6 ай бұрын

Just looks like an xmaxx

@MikeMac90 5 жыл бұрын

Extended swingarm full suspension around it and wider stance. Think it’ll be the first Chinese kids atv with an extended swingarm that I’ve seen 😂😂😂

@OpenRoader 5 жыл бұрын

OK, that was freaking HILARIOUS!

@elijahallen475 5 жыл бұрын

I just got done riding my 200cc Baja warrior rat rod mini bike and now I get to watch you guess today is good

@RetiredTechnician 5 жыл бұрын

A single engine 4wd rally kart would look awesome. Shaft or chain drive 😏 good bit of fabrication/engineering for you guys to work out.. Great content none the less

@lewisodonnell234 5 жыл бұрын

Stretch it and put a 2 smoker in it. 60-80-125cc in it

@Baldys_projects 5 жыл бұрын

Oh yeah give me a little four-wheeler like that I'll put a 66cc 2stroke bike engine on it haha

@nicovanduin1553 5 жыл бұрын

@@Baldys_projects those bike engines are gutless

@koskey06 5 жыл бұрын

I've been saying for decades. A company should make a mini quad!

@Taulksik 5 жыл бұрын

This video got me excited for summer.

@Fox_Stang_420 5 жыл бұрын

You guys should stretch it and move the foot pegs back to where you have more of a sportbike feel and if it needs it put a wheeliebar on it.

@St0nedCr4b 5 жыл бұрын

Don't park it! Stretch the rear end out, put a wheelie bar, and some kind of suspension in the front

@stevemanske4321 5 жыл бұрын

Bryce Flinstone gnhubbbbhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhehhen hbhbhhenhbhhnhb ehhehhhhhehhhhhb r rbhbhbrnnhjhjhjhhjhj. B

@lilsav6962 5 жыл бұрын

Quad bike looking like Optimus Prime Red and blue, "Autobots, Roll Out!"

@oldschoolhillbilly560 5 жыл бұрын

At 39 seconds Ike looks like a pelican. Sorry that was to good to let it go. Keep the the good work.

@barryhimes8051 5 жыл бұрын

Extend the rear part of the frame to move the rear axle back.

@89ludeawakening1 5 жыл бұрын

The Volkswagen you're thinking of that's all different colors is the Golf Harlequin.

@olekaarvaag9405 5 жыл бұрын

I obviously don't want Ike to suffer or anything like that... BUT! Part of me really wanted to see Ike not catch himself in time at 5:13 and completely faceplant in the mud. Crazy, dumb and crazydumb idea that would make it super stable; make a quadcopter inspired design. With a super long and wide wheelbase and keep the rest as small as possible. It would be ridiculous but so awesome.

@craigcarpenter2069 5 жыл бұрын

Love the content as always! I suggest an extended and widened rear axle and suspension system. Say 2 to 2.5 foot rearward and widened about 1 to 1.5 foot. Use the original axle mount as the mount for the extension bars. Make a mount under the rear seat loop for a large mono-shock and adjust for a few inches extra lift from larger tires. You could also use the existing rear axle mount as a point for a chain idler or tensioner and use heim Joints to achieve some articulation.

@danielihlenfeldt3580 5 жыл бұрын

Stretch the frame to keep the front end down to reach it's full potential.

@SPEEDY1894 5 жыл бұрын

Way too much chain if they did that

@termone1493 5 жыл бұрын

@@SPEEDY1894 Jackshaft...

@SPEEDY1894 5 жыл бұрын

@@termone1493 yah they are famous for that :)

@termone1493 5 жыл бұрын

James woods yea just stretch it longer than the dragster and put like 15 jackshafts... easy

@seanchastain9801 5 жыл бұрын

Ya'll need to stretch it and beef it up..

@curt5160 5 жыл бұрын

Loads of ideas for something like that.... Move whole rear axle back (extended swing arm type thing), some sort of rear mud guards, lower tooth sprocket, go all out on the carb tuning (jet drill, porting) see if you can get it to rolling burn out

@NotMeeither 5 жыл бұрын

Stretch the frame add wheelie bars , big paddle tires and a TC and set it up for sand drags at Busco Beech !

@joegotillyoublow1834 5 жыл бұрын

You need a four foot teenager to sign a waiver and go nuts on that thing

@Alfred..E..Neuman 5 жыл бұрын

I was thinkin more like a 3 foot midget!!

@Professordunce1 3 жыл бұрын

I'm 5 8 and thirteen I'd ride that.

@christycopley4463 3 жыл бұрын

5, 3 13

@b.g.yodagrow5344 5 жыл бұрын

Everyone says "stretch it" , "wheelie bar" etc. What they don't understand is that you guys always try to get the most out of stock frames. If you mod it too much, you might as well build from scratch.

@rogue5861 5 жыл бұрын

Tracy Autumn they already cut it up, no reason not to stretch it.

@calebkissinger5451 4 жыл бұрын

you guys and rather B welding should go to busco beach and compare mini ATV's I would really like to see that video

@Tee_Spoons_Garage 5 жыл бұрын

I would cut the frame and extend it forward and make a drag quad out of it just for short runs of course love the episode keep it ip

@codystewart1615 5 жыл бұрын

I have the same mini quad. I think im going to put a predator 212 on it now lol

@hshsshhwhwejejeje6652 5 жыл бұрын

Cody Stewart whats the quad called? I’m trying to find one

@codystewart1615 5 жыл бұрын

@@hshsshhwhwejejeje6652 I dont know the exact name, but ebay carries parts for it listed as a pocket quad or mini quad 49cc. Something like that.

@kuckam98 5 жыл бұрын

The golfs you’re talking about are the harlequin edition

@calvarycustoms6681 5 жыл бұрын

@CarsandCameras here’s an idea: remember the cool little “mini-rig” that was at GPS a couple of years ago? I think it’d be a cool tribute to the passing of Burt Reynolds, if you guys built a gocart version of “Bandit Two”, the Kenworth in Smokey and the Bandit. Start with the Tilliquad, using the motor for the truck, using the wheels and tires for the trailer, then take the frame, handlebars and seat, and install them in... well, the nearest scrap-pile, preferably. 😏

@sammyrothrock6981 5 жыл бұрын

Dudes that a chair a motor and wheels!! Lol

@nickshabat258 5 жыл бұрын

Put a wheelie bar on it and call it mini drag quad (like if u agree)

@quentinkave8442 5 жыл бұрын

Build a trailer so the monster truck gokart can pull the 4 wheeler😂😂😂😂😂😃😀😊

@kylearruda1041 5 жыл бұрын

Most sketchy build yet might even top the red wagon cart. Love the content guys keep up the fun work and stay safe. I'm still waiting for a true 4 wheel drive go kart with full drivetrain out of a 4 wheel drive quad.....

@jerryking1434 5 жыл бұрын

It's a bar stool racer....minus the bar stool...🤣🤣🤣

@coffeyscarburetors6437 5 жыл бұрын

You really dont need to go much faster then that. 19 mph is fast for that thing.

@drews_red_ram8731 5 жыл бұрын

I hit the like button and it was 212 likes

@mehgusta 5 жыл бұрын

IMPOSTER.

@piccadillypainting2826 5 жыл бұрын

It’s perfect as is! Great work guys I love it. More of a bar stool racer than anything else.

@pietervandyk7178 5 жыл бұрын

Make the frame longer and put shocks on and make a bigger Handel bar and put other tires on and make the engin stage 2 and delete the governor, Love the content, God be with y'all God Bless.

@kingz-244 5 жыл бұрын

why don't you guys try and stretch it so it does not wheelie all the time lol

@Underpantsniper 5 жыл бұрын

Make everything longer taller and wider: taller wider tires, taller handle bars, wider foot rests, longer gearing, extended rear swing arm, longer front control arms. Just a few ideas.

@critch84 5 жыл бұрын

Seen a few comments already about stretching the rear. While I am in agreement about this I think you ought to consider building it into a swingarm like you'd see on a full size atv. Make it with a wider stance and then also stretch the front enough to accommodate a-arms that match the new width of the rear.

@shplayshiggty7537 5 жыл бұрын

Man when you guys have kids they're gonna have it made!

@jessehunt697 4 жыл бұрын

This, but with a huge rear swing arm, huge rear tires, and some better front suspension. Ultimate drag atv

@blkicemike4857 5 жыл бұрын

Awd'daaauum!!! Elephant on a piss'Ant,.. 😂🤣😂. 🕺..👍🏼

@twistedwrist7650 5 жыл бұрын

This little quad is so sketchy I love it🤙 #loopmonster

@MillennialRebelion 5 жыл бұрын

Yah know i didn't like the death trap until i heard loopmonster... Makes sound less serial killer, and more like a challenge

@chandlerhester3461 5 жыл бұрын

Mini atv: dose a while for 1 sec Carsandcamra: thumbnail

@benjaminbaxter5763 5 жыл бұрын

You could paint it to match the Tillotson blue and name it "Baby Blue"

@Shmoozo55 5 жыл бұрын

The Tiny-tanic? It keeps sinking into various things. Puddles. Mud. Lawn. Totally cute. Its charm is that it is such a colossally flawed design that it really cannot be ridden with grace.

@rustyshacklfort9508 5 жыл бұрын

Stretch it , slicks in the rear and a wheelie bar and it’s the perfect companion to the drag mini bike .

@gingerkitty1374 5 жыл бұрын

Haha...love watching two brothers-from-other-mothers having fun! You guys are killing it. Great niche. Maybe the Grand Prix could be extended to twice around to make up for Johns advantages? :p

@RasmusNielsen32 5 жыл бұрын

Keep going with the projekt! I diffently want to see you guys put some supension on it!!!

@mikewestervelt9440 5 жыл бұрын

Extend the frame/wheel base, larger wheels and tires, and front end weight... be a neat little drag/race quad!!

@malcolmdavis506 5 жыл бұрын

Make a swingarm rear end. love the vids, keep em coming

@brandonirick4406 5 жыл бұрын

Extend the swing arm a little bit and put PVC on the rear tires. Drift quad!

@shepdgc.og.soldier7732 5 жыл бұрын

Longer axles wider wheelbase.I like The independent suspension idea though too on a wider base. Or just trash it because you have to change nearly everything to make that high chair safe.Spare motor..?✌️

@bernymac2010 5 жыл бұрын

Number one rule bros - Always keep your tip clean!!

@thebearman6065 5 жыл бұрын

Extend frame and swing arm for sure! Has the potential to really be a nice cart

@gljarheadj2083 5 жыл бұрын

Just to funny. I have tears running down my face. Build a bar stool racer guys.

@armedinbama 5 жыл бұрын

Ike's torture for our pleasure! :O)

@bigbadjohn8534 5 жыл бұрын

I was thinking y'all need to add a wheelie bar to it. Like the one y'all put on the little black mini bike.

@jakejones3406 5 жыл бұрын

Would be cool to see from the ground up a 4x4 monster truck go-cart in the same spirit of the 670cc Dragster. Also, as a side note.... (I've watched a lot of your videos and "It'll be fine" for what you guys do) Try to practice some more with the welding. You two do great work, but MIG makes for a lot of bad habits. That machine can run Dual Shielded FCAW which would offer a welding process equal to Stick and you guys could skip TIG (which has been a hindrance in the past). In either event, love the work you do and keep it up!