10MHz Shop Reference - Part 1
Рет қаралды 2,715
3 жыл бұрынI purchased a 10MHz OXCO board from E-Bay and am going to see if it will make a satisfactory shop reference. I will initially use a QRP Labs GPS stabilized oscillator to calibrate the OXCO but I hope to demonstrate a WWV received signal as a calibration method.
@380voltov3 2 жыл бұрын
For this ocxo you need a super stable power supply because it doesn't have a Vref out output.
@donepearce 6 ай бұрын
Just a heads up. It is an OCXO, not an XCXO.
@daveodessa 3 жыл бұрын
Since your using a linear power supply for the OCXO maybe a power supply with a 12 and 5 volt tapping (or there about) could be considered.
Cool Items Official
Рет қаралды 22 МЛН
Simple Inventor
Рет қаралды 1,9 М.