I will say that was an impressive amount of smoke, well done!

glad you still made this. shows we all run into walls sometimes.

Sounded like there was a ton of resistance when you pulled the throttle...the wheels stopped almost instantly....they should spin for a while afterwards. Bearings, mesh, 35amp esc?

Man! That thing smokes more than me! Hahaha 👍🏾👊🏾✌🏾

Great video, nice to see the lack of space for a brushless conversion. Lots of people are going crazy for this car. I'll stick with the 144001 and the 124019 much better once brushless. Keep it coming dude.

That happened to me after converting my wltoys 124019🙈 Even if it says "2-3s", 3s is a definate no-no with these. Here's a great tip though! Glue the heat sink from the smoked esc on top of the new esc using micro prossesor glue! Makes a huge difference in temperature even when using 2s!

I can see valones rc hobby waching this vid "wow all of my stuff was a bolt on and works amazing"

When I was new to RC have blew up the granite Putting taller gear in and running it on the grass not knowing.The brush version.

I have had one of the 60 amp esc's that also "could" handle a 3S and after a few minutes, burn baby burn!!!!! feel your pain

lol SMOOK Oh and my worst experience with my RC car modified is I bought a freaking cheap ESC and the motor locked up and smoke

watching again, we got 4 of these things now, LOL thanks

Great video guys . Sorry it didn't work out and you wasted your budget. Love watching your channel

7.40 epic moment... I'd breath that stuff in and get high as a pork chop fling

If you don't remember, I told you about a drag racing group in toledo a few months ago. If you look up 419 nprc on facebook that is the page with all of the information about are group. We have a $1000 outlaw race coming up in may. The classes that we will run then are 10.5, 13.5, and outlaw. Hope to see you guys there. Ps. I don't have social media so this is the only way to contact you.

I like the way it performs stock with brushed motor.I am planning on buying the brushless version so i can have both.Love these little drift trucks

I toasted a brand new Hobbywing 1080 last week. Didn't pay attention when I soldered connectors on and plugged the motor in to the battery leads. I've wired up literally hundreds of RC cars over the years and never done that before. Bet yer heiney I'll never do it again either. D'oh!

Yeah, always make sure to buy an esc rated at a lot more amps than it advertises, plus it lets you use even more powerful motors and higher gearing without overheating.

Sucks it blew up.. but it made for some good content 👌 the mesh looked pretty tight??

Ah look at that VAPE! haha. All good bro. We will get it done. If you need anything, let me know, I can send ya something if need be, keep that budget down for ya. I have two more of these cars coming in for review, so we can do something with them. =)

Gear mesh is 0.7 mod on spur and pinion , 2mm motor shaft

The reactions a good esc smoke show gets makes me want to put a little smoke bomb on a truck and take it to a hobby shop parking lot. Let them watch it run for 20 minutes after what looks like a write off lol.

Bro you know all electronics run on smoke, so ya can't let it out😬😬🤣

When you buy a cheap brushless setup get a super cheap brushless motor and a expensive esc. That is what I have found I tried 3 cheap esc's before I went with a castle

better luck next time

Hey it was a good try and I can't wait for plane b bring out the guns man

Me being 13 I'm on a tight budget and when I modified my traxxas rustler with a new motor, esc, and servo every single one died after one run. The motor started to smoke like crazy and then here come the cracks and the pops of my esc and smoke started to GUSH out of that thing and the servo fried.😂🤣😁👍

Smoked out Saturday in full effect!

Thank you for sharing your experience....

Just like my Arrma Mega 550 and Voltage. Up in smoke but took 10 minutes each. ESC Were Suppose to handle 3s.... Couldn't even handle 2s. Would run for 10 minutes each before thermal shutdowns..

You can take the hex off your haiboxing buggy and put them on the truck just pull the hex off the pin drive and switch everything over easy peasy

Too bad you didn't try it on 2S first. Then I would drive for a while and check the temperature of the ESC and the electric motor. Btw, today I was fixing SLAMMR NIKKO for a neighbor’s kid. I did not find the same e.m. and I replaced the brushes. When I tested it flashed from e.m. until the brushes adjusted themselves. It was fun.

Got the truck version coming and an adjustable wltoys 540 motor mount and a 540 motor, hope it goes well! Can't wait to see what you come up with! 👍🍻

Roached that esc......whoops....

Thanks 👍. Love the smoke. I'm planning to buy one but seeking brushless parts first.

Also change out the wheel hub do a 1/10 scale conversion kit and you can put any tires on it

Your biggest mistake was plugging in a 5000mah 3s to a 35A ESC which couldn't handle such high capacity. I just converted mine to brushless with a 40A all in 1 ESC from a hbx truck and used a small 1500mah 3s.

managed to fix the esc friend has a fix how to fix it

I think that 5000 was to much for it lol maybe 1500 would of been fine. Next time try racerstar.

Why did you get a 1/16 scale if you’re the 10th scale garage?

Oh I hate when that happens. That burning electrical smell lingers for days.

Hi man you should try etronix photon 2.1w esc in it they are really good esc and qwiq small sould fit in there 👍

Hahaha nice work! We will be doing something similar soon and I know for a FACT the car will go up in flames...😅 (Love your mini-z track btw!)

what suspension you use?

Ironically my brand new Onyx ESC just went up in smoke. Today... 5 mins into its maiden voyage...

OMG ...ESC is fucked Up ...🤭this Car is amazing 🤘 3.30...great Suspension Work 👍 I absolutely LOVE the tiny rear diffusor...OK thats IT for the ESC 🤣😂😇🤭 Never heard of TOASTERONI before...should I?🤣😂🤣😂🤣😂🤣😂🤣😂🤣

I ordered the pair of them about two weeks ago so I should get them in a little bit it's going to be fun I got my basement all set up for it already....🤪

sg 1604 engine sound ติดตั้งยังไงครับ

What size pinion did you get to fit standard one will not got same motor

A moment of silence for that ESC

I have never done this in all my years of building. This mane starting out like a few other tubers lol 😆we know 😂 good 📹 video bro

Have you reviewed any mini rc cars?

I think ur discharge was to high?

To high mAh...maybe..idk...why would it do that?

of course it's going to blow out, look at the size of your LIPO it's humongous, I have this ESC, and it's only could take 2200 mAh , 20 C max

One last thing the dumbo rc receiver comes with gyro

Tried plugging a 3s into my tble02s and it blew up instantly

Using junk electronics gets you smoke

Hbx parts does not work with anything but hailboxing cars I had to learn that the hard way check into wl toys parts

Hey, very nice video! Do u know the size of the hex what can fit on these car ? Thank you

R. I. P esc 😢😅

Look into wl toys a959b metal differential kit it has all the gear pinion reduction gear and the trans this hobby is about riggin it you know what I mean

I've been using the HB 16bl30 4500kv 3s with this rc. It's quick but I don't really like how stuck the diffs are.

Well looks to only be a fun rc stock. That sucks.

Where's the follow up!?

Get a dumbo rc 6ch with gyro it’s like 40 on AliExpress what makes dumbo better than radiolink 12v radiolink and most transmitter push 8-10v dumbo does 12 which means you can put a whole lot of extras on the car the 1603 sg I’m still waiting for mine awesome truck I can’t wait to set up my brushless in it also check out wl toys 1/14 1/18 scale parts they match up you just gotta rig it check out rc clan he’s got a challenge on here with those sg 1603 cool video though

I didn't know how to message you on social media, but I need advice on getting a new ESC for my traxxas stampede, a 3s one that would not cost an arm and a leg lol

Bummer,put a different esc and let it rip

Smoke is never good if it’s a rc.

I have an sg1601pro and it can handle a 3s but comes with a 2s

music too loud, speech too soft, otherwise great video on this little car.

As much work as you did that sucked

It was all going so well 😂 . It will be good to see what you get out of it I might turn mine into brushless also 🤔

you give up to easy... find a better esc or try 2 s ...should always try 2s first on iffy builds...nice demo

It can be done check out rc clan and tomley rc

I got a rustler and I mod it and pepole call me cheap lol

Bahahahaha!!! And this is why I don't buy off brand Chinese junk. 🤣🤣🤣🤣🤣 just because it's cheap guys doesn't mean it's good haha

Your first mistake was you bought a goolrc esc your second mistake was you bought a goolrc esc they are absolute junk!

Great 👍😊👍

This is why you can't have anything nice🤣😆 So does that mean Chris wins? Lol Man that sucks to see, and probably smells pretty bad..

boats and planes are way worse at least they were in the beginning..

That would of been my typical experience!😂🤣🤪Great video! Try a higher c rating 2s and play with gearing.

F

I subscribe to you , you speak nice man you sound very nice. The chinese are full of lies, it say 3s and just burned. I have the same experience with 60 amp surpass hobby esc. You have right that the upgrades must cost under the price of the car, but as you see and as i have see the cheap chinese electronics many times go wrong. Another proof that the chinese electronics are crap . I know that the things brake sometime, but me personally i am very low budget guy and when something brake easily , makes me to go away from the chinese rc cars. Sorry but i am not reach guy to try and try things. But i don't give up so easily , i will give some opportunities, but after some time with the hope that they make something with more quality.

Damm

whoops! lol

What servo did u go with