Hi there, I believe I ordered from here, though I am not completely sure: www.ebay.com/itm/353408231084?hash=item5248c5a6ac:g:csgAAOSwgZ1Xwdsr And here is the screenshot of which item you should select: prnt.sc/1rehndf I hope this helps, best regards.

I haven't measured, but according to calculations, it will draw 0.83 Amps. Use this website if you are interested in other Values: goo.gl/iKptyn Just enter 2 values (Voltage and Power in this case) to calculate Current and Resistance. It would require 8.3 Amps to run it, but you always want stronger power supply than it requires, 9 amps would be perfect probably. Heat sink is necessary. I hope this was helpful.

CineonElectronics Thanks dear friend, you have cleared my doubt....Actually, the current consumption has been shown to be 1Amps for such light in a video on you tube...I asked the uploader the same question...He couldn't give a satisfactory answer...

amigo usa fuende de pc, es perfecta, yo tengo una lampara de 200w (20 led 10w) y funciona perfecta.....You can use PC power supply

Your Resistor will overheat

Why do you need mine resistance number? i think it was 100 Ohms or 1k ohms, if you give me a proper reason why you need resistance i might even help you

CineonElectronics well these leds heat up idioticly fast wgen I put them on 12 volt

I guess if you weren't an indian you could work that out

I hope this helps: prntscr.com/rts4mb

Very hot :D

Oye drogo gente como tu no progresa