11 USEFUL Things to 3D Print First - Practical Prints 2023

Рет қаралды 241,059

Күн бұрын

Here are some USEFUL and PRACTICAL things to 3D print first in 2023 with cool 3D printing timelapses. JLC3DP 3D Printing &CNC Service Starts at $0.3, Get $60 for New Users: jlc3dp.com/?from=Macro3DPrints
1. Ice Cube Shot Molds by Flowr
2. Cross Tweezers by joo
3. Drill Bit Holder by esromj
4. Broom Hanger by santivilas77
5. Drill Dust Catcher by FrankBer
6. Desktop Organizing Bins by I1mb0
7. TV Remote Organizer by Donny05
8. Snap Cap for Cans by Guglex
9. Wallet, Keys, Glasses Holder by tntfriesen1
10. Sponge Holder by SimoMetal666
11. Glasses Holder KmeierBBKsteel
ALSO... We are giving away 3 items from this video FOR FREE. To enter, do the following 3 things:
1. Like this video
2. Subscribe
3. Comment which print you want!
3 winners will be announced in the next video. We will reach out to you, then ship you your gift FOR FREE. Did we mention it’s FREE? Good luck!
Songs used: “Pray” by Anno Domini Beats
“Positive Fuse” by French Fuse
“Glass” by Anno Domini Beats
Here's where to find the STL files!
1. Ice Shot Molds www.thingiverse.com/thing:303...
2. Cross Tweezers www.thingiverse.com/thing:25587
3. Drill Bit Holder www.thingiverse.com/thing:253...
4. Broom Hanger www.thingiverse.com/thing:297...
5. Drilling Tool & Dust Collector www.thingiverse.com/thing:560...
6. Desktop Organizing Bins www.thingiverse.com/thing:423...
7. TV Remote Stand www.thingiverse.com/thing:537...
8. Cans Snap Cap www.thingiverse.com/thing:557...
9. Wallet Keys Glasses Holder www.thingiverse.com/thing:498...
10. Soap Bar Drainer www.thingiverse.com/thing:518...
11. Glasses Stand www.thingiverse.com/thing:559...
Check out the printer I use! amzn.to/3Kh3pbD
Check out the filament that I use!
8-Color Bundle: amzn.to/3k9gV6i
Grey: amzn.to/3YMLbmO
Red, Blue, Green, Orange: amzn.to/3YIjCuL
Black: amzn.to/3YIjCuL
Silk Filament: amzn.to/41cVaDA
#3dprinting #practical #useful #lifehacks #timelapse #diy
Practical 3D Prints, DIY 3D Prints, Useful 3D prints, 3D Print hacks, lifehacks, 3Dlifehacks, Print tools, First things to 3D print in 2023, 3D Print Timelapse, 3D printing gift ideas, 3D print gift 2023, 3D print ideas 2023, Things to 3D print, #3dprinting, 3D print timelapse, 3D print, macro 3D print, cool 3D print timelapse, 3D prints 2023, useful 3D prints, cool 3D print ideas 2023, useful 3D print ideas, best 3D print timelapse, practical 3D print, 3D print ASMR, satisfying 3D print, mesmerizing 3D print, Anycubic Mega i3 S, FDM printer, macro 3d prints
0:00 Introduction
0:09 Ice Cube Shot Molds
0:43 Cross Tweezers
1:01 Drill Bit Holder
1:22 Broom Hanger
1:49 Drill Dust Catcher
2:16 Desktop Organizing Bins
2:37 TV Remote Organizer
3:02 Snap Cap for Cans
3:22 Wallet, Keys, Glasses Holder
3:55 GIVEAWAY!!
4:10 Sponge Holder
4:30 Glasses Stand

Пікірлер: 160

@macro3dprints 4 ай бұрын

JLC3DP 3D Printing & CNC Service Starts at $0.3, Get $60 for New Users: jlc3dp.com/?from=Macro3DPrints

@rickseiden1 Жыл бұрын

FDM prints, no matter the material, are not food safe, as it is impossible to clean them correctly, and bacteria start to grow at the layer lines. The ice glasses may be OK, but the can tops are a very bad idea.

@macro3dprints Жыл бұрын

Very good point Rick. Thank you! Be safe with your 3D prints everyone!

@Pewpewnation123 Жыл бұрын

Not true at all. PETG is rated food safe and dishwasher safe. I have many things I have been using for years made of it and wash it all the time and have not had any issues. I think you are confused with how FDM printers work. There is no gap in the layer lines and if you have a good enough printer, the layer lines are pretty much nonexistent. Make them 100 percent infill and print at .1 later and you will be fine.

@leandroalvarez9716 Жыл бұрын

@@Pewpewnation123 the filament is ok but not the print, when you are printing anywhere is in a contaminated area for food stuff

@BameronCerry Жыл бұрын

@@leandroalvarez9716 if you print in an enclosure then it’s safe.

@ThatsPety Жыл бұрын

@@Pewpewnation123 the problem isnt the gaps in the layer lines. If there were gaps then it wouldn't even be water tight. The problem is all the tiny crevices created by the layer lines, which very much encourages bacteria growth. Also I don't know who lied to you, but even the best FDM printer on the market will put out prints with visible layer lines, even with smaller layer heights You can get around it though. Coat the print in a food safe epoxy resin and problem solved

@jeffreyp.kitchin5420 6 ай бұрын

I like the Tool Bit holder and the Snap Can For Lids. Thanks!

@HullAnimations0113 Жыл бұрын

Snap cap for cans! I needed those!

@GameUpOG 3 күн бұрын

Remember most filaments is not food safe. Make sure yours is before using to make ice

@macro3dprints 2 күн бұрын

Yes it’s very true!!

@KnytFyre Жыл бұрын

The can toppers look cool!

@gloriagreer3218 Жыл бұрын

Love to have the desk top organizer, please!

@carolsullivan232 9 ай бұрын

The yellow and black organizer was my favorite

@eaglee247 Жыл бұрын

looking at my desk i definitely need the desktop organizing bins

@BWB300 Жыл бұрын

Wallet key holder be kewl to have....love the vid Bro!!!

@luisaponte4990 Жыл бұрын

Geat Video.. Keep them coming..The desktop Bins is where its at

@macro3dprints Жыл бұрын

Thank you!

@Evil_Clown_3DIY Жыл бұрын

hi, i love the Ice Cube Shot Molds

@jamesjennings3098 Жыл бұрын

Nice! Tweezers look cool.

@macro3dprints Жыл бұрын

Thank you! They are very handy for small bolts and screws :)

@howevisual7099 Жыл бұрын

Disclaimer: Make sure your materials are foodsafe or see if there's a way you can make them foodsafe on the back-end if needed.

@adrianschuh2040 9 ай бұрын

Please dude upgrade your printer profiles... there is so much stringing 😱 increase retract before moving, maybe decrese printing speed. The results will be way more batter

@user-zv7qz9bu6t 4 ай бұрын

And possible lower print heat level.

@logicalfundy 3 ай бұрын

Could be moisture in the filament as well.

@MyLionShare Жыл бұрын

Cool useful Ideas, thanks for clearing my brain cloud, I'm getting more creative from here with my Flashforge Adventurer printer.

@macro3dprints Жыл бұрын

That’s great!! Thank you, very happy to help :)

@Jakeypoo-di6hy 8 ай бұрын

@@macro3dprints- Last week I got Ender 3 and Chromebook . Unfortunately I am at stop sign. No TF Card on the screen, Please help me . Before I send this message to you , I did put SD memory card in Ender 3 unfortunately it’s saying No TF Card

@ogmstech Жыл бұрын

I would like the Desktop Organizer

@askvideos1234 10 күн бұрын

I like the lid/ can tops. Great video

@macro3dprints 10 күн бұрын

Thank you! Those are some cool designs!

@therelaxationmusicstation7865 Жыл бұрын

I NEED THE DESKTOP ORGANIZING BINS PLEASE!!

@danielstone153 Жыл бұрын

I like those snap can lids

@macro3dprints Жыл бұрын

They are pretty useful! And easy to print!

@TheSeasAreTooSalty 5 ай бұрын

Loved the video, helps me a lot!

@macro3dprints 5 ай бұрын

Thank you, very glad it helped! 😊

@michaelwuchitech7598 2 ай бұрын

I liked the tweezers

@violettracey Жыл бұрын

Cool!

@macro3dprints Жыл бұрын

Thank you! 😁

@Print-Productivity Жыл бұрын

I NEED THE DESKTOP ORGANIZING BINS! PLEASE! I shared this video to 4 other people! HAVE A GREAT DAY!

@macro3dprints Жыл бұрын

Congratulations! You won! Please provide an email address for further communication or reach out to macro3dprints@gmail.com to claim your prize!

@Mii-Mii- 6 ай бұрын

Your printer seems to have a hesting problem or the x gantre is lose a bit to mutch ot to tight, there are riffles on some of the print, its mainli on the PLA prints i gues, i had the same problem for about 2 weeks before i figured it out.

@macro3dprints 5 ай бұрын

Thank you for your helpful tips! I will try to see if the x axis is too loose or too tight

@lemarwilliams7693 6 ай бұрын

Tv remote stand is nice

@derkarhu5079 Жыл бұрын

i wonder how much material costs are for items like those desktop bins? i have no idea about material costs, so would like to know about the cost vs. convenience ... for instance, it's nice to be able to make items 'to fit', but it wouldn't be so keen if a little bin cost $3.00...

@macro3dprints Жыл бұрын

Great question! The black desktop tray holder was 77g, and the black PLA material was $0.022/g so the material cost for that part was $1.69. Each drawer used 14g of material, and the yellow PLA material was $.031/g so the material cost for the 5 drawers was $2.18. So in total you're looking at about $3.88 for the whole thing. So yeah you may be able to find a cheaper option somewhere that's also more convenient, but the customization is the best part! And you can have fun making it :)

@AlanTuringWannabe Жыл бұрын

You'd be better off using a system like Gridfinity.

@freefall1963 Жыл бұрын

I could use the desktop organising bins, please.

@gergopapp8097 Жыл бұрын

I need the BROOM HANGER

@justplaybedwars522 Жыл бұрын

I need the DESKTOP ORGANIZING BINS

Жыл бұрын

Some are useful, some not so much… but fun.

@KESZREMELEM Жыл бұрын

I need the DRILL DUST CATCHER

@southernbelle8596 Жыл бұрын

Probably over but the desk drawer organizer

@stickboyfpv4742 Жыл бұрын

Awesome video brother! Lemme get that 5 drawer storage container😁😝! Keep em coming!

@macro3dprints Жыл бұрын

Thank you! Unfortunately the competition has ended but there is another one on the next video! kzfaq.info/get/bejne/gNCpaLudntXZhKc.html

@Pma_29 Жыл бұрын

I want a video wiht a football lego stadium

@KristofPapp-di1zp Жыл бұрын

I need the CROSS TWEEZERS

@planl3d_official Жыл бұрын

This is a useful video, I enjoyed it ❤

@macro3dprints Жыл бұрын

We are glad, thank you for the feedback!

@turboroyb Жыл бұрын

When i print the molds for ice cubes it is leaking when it is in the fridge. Do you have a sulution for this?

@macro3dprints Жыл бұрын

That is a good question! Perhaps the layers are not sticking to each other very well. Try increasing the temperature slightly to melt the plastic more and let each layer bond to the next a little better. Don’t go hotter than the filament specifies though!

@levimollerofficial Жыл бұрын

can i get the broom holder i could really use it

@George-nx8zu Ай бұрын

How does the ice come out of the 3d prints so easily?

@macro3dprints Ай бұрын

Not too bad! If you print it in a hard material like PLA, ABS or PETG, running some hot water over the back does the trick. Otherwise, TPU is flexible and would be the best option!

@Ash2n Ай бұрын

Where do u get the models for these? I liked the video :>

@macro3dprints Ай бұрын

Check the description! They should all be there for free 😁

@Ash2n Ай бұрын

@@macro3dprints thanks

@ninjastrike6454 5 ай бұрын

Watch i need is iPhone 6and 5 and I love your video

@srlsigns7944 Жыл бұрын

Post these videos without music so we can hear the awesome ASMR!

@macro3dprints Жыл бұрын

That’s a great idea! Stay tuned for the next one :)

@saimon3808 Жыл бұрын

very cool this video

@macro3dprints Жыл бұрын

Thank you!

@saimon3808 Жыл бұрын

@@macro3dprints can i ask you a question, i'm new in 3d print, less than a month, so i use in PLA 210ºC in nozzle and 60ºC in plate, after the first layer, i can turn off the heat of the plate, and turn to 0º or i should put 60º all the time, sorry for my poor english but i from brazil. and thanks for helping us and show your creations.

@macro3dprints Жыл бұрын

@@saimon3808 Hey Saimon! That’s a great question. You can leave the plate at 60C all the time! Normally when the printing plate (also called bed) is hot, the filament sticks to it better. If you let it cool down, there is a risk that your print detaches from the build plate, which would ruin the print! Good luck! Let me know how it goes!

@saimon3808 Жыл бұрын

@@macro3dprints thanks for the information, its very important for all, thank you so much

@macro3dprints Жыл бұрын

@@saimon3808 absolutely! If you have any more questions feel free to ask!

@The-other-guyo 10 ай бұрын

Desk organizer please

@elpatotroll9568 Жыл бұрын

I need the desktop bins!❤

@alimalizxcvbnmaccbbm2616 11 ай бұрын

i want a random one and i live in Carapichima Trinidad and Tobago🇹🇹 (i live in Trinidad)🇹🇹

@alexkostuchenko3697 10 ай бұрын

doses it require to build it or not

@jw200 Жыл бұрын

You should adjust your printer. Lots of layer lines, stringing etc.. what is it? ANET A8 (worst printer on earth)?

@macro3dprints 10 ай бұрын

Thank you all for watching!! What was your favorite part? What should I print next??

@manlyyoumans6166 4 ай бұрын

Desktop organizer bin

@Subcribe-or-your-dog-is-mine 4 ай бұрын

A bear

@nilleftw Жыл бұрын

Good thing you paid the ice puppy tax.

@user-wb7fj8xo3i Жыл бұрын

New channel like this

@macro3dprints Жыл бұрын

Thank you!

@TAPSSebas 9 ай бұрын

i also need a dog that eats ice cubes

@macro3dprints 9 ай бұрын

They are the best :)

@easterlingsminiatures 9 ай бұрын

How do you get your prints to come off the bed so easily?

@macro3dprints 9 ай бұрын

Want to know the real secret?

@easterlingsminiatures 9 ай бұрын

@@macro3dprints yes

@macro3dprints 9 ай бұрын

@@easterlingsminiatures just need to wait some time. 10 minutes after the print is done and they snap off satisfyingly. After an hour, they should just remove with no resistance. right after the print is finished and the printer bed is hot, the prints are really hard to get off. So the longer you wait, the more they cool down and the printer bed cools down, the easier it is to take them off.

@easterlingsminiatures 9 ай бұрын

@@macro3dprints well not mine... they are stuck like cement, I actually have to reheat the bed to melt them a bit and then it damages the base a bit but I think it is after I installed the CR touch auto leveler, I think my z axis was was low.... great video BTW

@macro3dprints Жыл бұрын

We are giving away 3 items from this video FOR FREE. To enter, do the following 3 things: 1. Like this video 2. Subscribe 3. Comment which print you want! Winners will be announced in the next video. We will reach out to you, then ship you your gift FOR FREE. Good luck!

@Bnghwy55 Жыл бұрын

Twizzers

@caralee4873 Жыл бұрын

If I get chosen I don't care what I get

@Honey_baloch Жыл бұрын

I want broom holder

@onlywenilaugh6589 6 ай бұрын

Still most things are gimmicy for a 3d printer. Never seen the use really.

@tomp3440 11 ай бұрын

bad print quality :( you should maintain/adjust your printer, there's a lot of Z-axis wobble/banding issues, stringing, warping etc.. but very nice video!

@macro3dprints 11 ай бұрын

Thank you for the feedback! Much appreciated

@user-uh6uw3ok9n 4 ай бұрын

Are those ice cube makers healthy?

@macro3dprints 4 ай бұрын

Ehh I don’t think it’s generally advised to use FDM 3D prints as bowls or cups to drink out of/ near food or drink. But if you had an SLA 3D printer then that’s a different story!

@JosephStormJr Жыл бұрын

Wallet Holder please.

@macro3dprints Жыл бұрын

Congratulations! You won! Please provide an email address for further communication or reach out to macro3dprints@gmail.com to claim your prize!

@cameronrich2536 Жыл бұрын

Will someone pls 3d print me a 3d printer so I can get started sheesh. Thanks

@macro3dprints Жыл бұрын

😂😂

@userconvidat 7 ай бұрын

I need gear fan please

@napomvanszar1092 Жыл бұрын

I need the ICE CUBE SHOT MOLDS

@pbft.j Жыл бұрын

You didn't even credit the designers who put countless hours into designing that stuff and uploading it for us to print for free. Add credit. Always. Maybe someone will just screen record this video, change it a little, then upload it but put your video link at the very bottom of the description.

@macro3dprints Жыл бұрын

You are absolutely right. I in no way claim to have designed these, and should have made that more clear. I will do so in the future

@rodneyreitz7519 Жыл бұрын

. Cross Tweezers

@macro3dprints Жыл бұрын

Congratulations! You won! Please provide an email address for further communication or reach out to macro3dprints@gmail.com to claim your prize!

@mohammadabdullah6707 Жыл бұрын

Sorry...I'm a newbie (translation : stupid), and I was thinking to hire someone to make chair feet things(!) to prevent the legs from digging into the carpet. I have a tuition centre here in Malaysia, and 40 chair's × 4 feet. Any recommendations? I would need someone who understands I am a 50 plus ignoramus, who could measure and take photos of the chairs as needed, but beyond that...please prove to me that this technology is INDEED applicable in real life situations. Thank you...

@macro3dprints 9 ай бұрын

Hi there! That is a great application for 3D printing! 160 parts is still small enough scale for 3D printing to make sense, and allows you to iterate on a bunch of designs without sinking coat into a mile for plastic. I recommend finding someone local who can take measurements and who has a 3D printer, and seeing if they would do it for you for a little cash! You can start by looking at websites like thingiverse.com or printables.com for some design ideas. Best of luck!!

@jimee9796 Жыл бұрын

What's the music ? Artist ?

@macro3dprints Жыл бұрын

The songs used are: “Pray” by Anno Domini Beats “Positive Fuse” by French Fuse “Glass” by Anno Domini Beats They’re from the KZfaq Library and also in the description.

@Rhaine223 5 ай бұрын

great ideas but alot of your prints don't look good and the lines...dial it in more and you'll be golden

@macro3dprints 4 ай бұрын

Fair feedback, thank you!

@mariovojnichajduk6947 Жыл бұрын

Giving away items printed in the video to people who are looking what to print? Well, gonna print it myself.. 🤣

@macro3dprints Жыл бұрын

Lol absolutely! That is one of the goals, to give you all ideas to try yourselves! Just thought some giveaways could be fun :)

@mariovojnichajduk6947 Жыл бұрын

@@macro3dprints they are, keep it up! 😀

@JuanSumChninezeFue 5 ай бұрын

Wow. Must have been so much thinking about which boring and extremely basic prints from Thingiverse to choose from! Wish KZfaq still had the "Thumbs Down" feature.

@macro3dprints 5 ай бұрын

Ahh cmon

@Subcribe-or-your-dog-is-mine 4 ай бұрын

AWWWWW SHUCKSSSSSS (imagine spending 5 mins of your life write a hate post to just get the reply “Ahh cmon” what an absolute waste of time W Macro)