In this video we used Jumbo Garland Trays: www.growell.co.uk/growing-systems/pots-trays/garland-work-trays.html What size tent are you growing in?

I run a small very small electric submersible pump and an air bubbler

We recommend placing with the gold side facing up 👍

@@growell Gold face up inside the pot.? Yes...?

Yes, that's right

It’s a thin layer of copper, which kills (prunes) the roots when they come into contact. You’ll notice tree killing solution have copper based ingredients. Some old timers used to drive copper nails into the base of trees to kill them. Copper side up facing roots. The roots must come into contact.

We would not advise that you use organic nutrients with the AutoPot System. They're too thick and gloopy, often blocking the pipes.

@@growell So can I remove the pot, feed with organic nutrients and put the pot back into the autopot base ? Thanks for your reply

We guess you could try but it sort of defeats the point of having an automated system? You'd also need to make sure that you allow a period of time for any run-off before putting the pots back on the trays, otherwise the thicker organic nutrient solution is still going to find a way into your pipes, causing potential blockages. Our general advice is still not to do this - good luck experimenting and let us know how you get on!

@@growell Thanks alot! Peace

you can feed organically with the new upgrade of aquavalve5, my english is not that good so i have one piece copied. AQUAvalve5 - a 66% Bigger Inlet The needs of growers are ever-evolving, served by an increasingly diverse range of nutrients. With a 5mm inlet, the new AQUAvalve5 rises to the challenge of delivering the widest range of nutrients in a faster flow for a quicker fill, maximising system efficiency. Maintenance is reduced and the risk of blockages minimised. Also you can make it compatible with the autopots you already have, read more here. www.manchesterhydroponics.co.uk/product/autopot-aqua-valve-5/

You can use Cellmax Growing Cubes, which are made out of rockwool. :)

@@growell Ok awesome! thanks for responding. I appreciate it! stay safe!!

Hi there, it's a small Maxi-Jet pump.

An air stone would work, but not with organic nutrients really, or normal SHOGUN Sumo Boost. You would need an air pump and air stone. A normal pump would certainly help keep the nutrients nicely mixed, but would not necessarily offer much in the way of oxygenation.

I’m out 7-8days after transplant in the autopots it forgot the copper mats is that gonna screw me?..

@@skylarmcgehee1144 Thinking yes on that. I'd repot with the root stopping mats installed. Once the roots grow into the lines you are screwed well.

Just a circulation pump. It's gravity fed to the trays.

The tiny pump is too keep the solution well mixed. Not for distribution of the solutions.

Still have yet to try it but I’ve heard you can just use an aquarium wave maker or two depending on the size of your rez to keep the solution mixed

No, you don't have to open the valve all the way. You can partially open the valve to reduce the flow.

GOOD FOR YOU MATE, WATERING FROM THE TOP IS THE WAY TO GO UNTIL YOUR ROOTS ARE ESTABLISHED.

We'd recommend for best results use fresh media every crop.

@@growell thats gonna cost

@@bootangy you can reuse hydroponic media such as coir, hydro pebbles, etc

@@ceili ty

@Anonymous i am yet to start.

This is something we've never come across in this system, there is only a small amount of solution left in the bottom tray. We recommend keeping the nutrient solution in your tank fresh and clean. Use a good medium in your AutoPot like 60/40 Clay Coco or 70/30 Coco. Usually with light loving plants they will also be drinking quite a lot so there is a low risk of root rot or fungus.

there's 2 solutions for that , 1 - once the trays are full shut off the feed line till the water in the trays gets sucked up by the plant , once empty wait a cpl days and refill the trays and repeat ... 2 - there's air domes suggested to use inside your pots to feed air bubbles to the roots .... these should prevent your issues , gl

​@@yvonpilon8609Brilliant just the comment I needed cheers for that

Do you have an example that you can link for everyone?

Hi. What is Wicks?

This is just a guess but did you use ph stable clay pebbles? And if not soak the clay pebbles in water ph’d to 5.5 for 48. Hours before potting up with them. They could be causing your high ph in the pots

@@brettbecker6543 hey bret sorry for the late reply. Thanks for yours. I did not soak the pebbles, but I rinsed them very thoroughly to remove the dust. I recently switched to a small RO system. Just gave the new crop thier first watering with that. Will see how it goes. Thanks again for your thoughts. To add to that the ph was climbing in the res mainly and flowing to the pots.

Same problem mate did you find a fix? I find cleaning them evry 2 weeks abit helpful but sill climbs I dont use ro system either as the water iv got is decent enough

ph'd water isnt stable for verry long , it can change in less then 24 hrs .... best to check your rez ph daily and adjust accordingly , gl

​@yvonpilon8609 by adjusting the ph every day does that effect the nutrient ratio?

Do you have any recommendations for a automatic watering system

@@tarotthehangman9961 I’m not a big fan of them even some of the more expensive ones are a hassle to get working right. Set yourself a schedule and buy a good 5/10 litre pump sprayer

@@TimRobson30 ​ Not as good as automation. As you can feed as many times a day and one at night....and always at the regularity and set amounts. Once you have that dialed in, then you can twerk to perfection. ....and get some life back and be able to go away for a few days. Also I looked at flooding by hand and running off some extra into the tray and sucking it up with a wet vac, so I would have needed a 1m tray which costs about £21 and the wet vac, £40 watering can £5 and fabric pots £15 and a sterile new mixing bucket £9 equals about ninety quid. The coco bricks are £7.50 each so £30 for 4 and mixed with everything.....so about the same as coco + perlite and some clay chipping when filling 64 litres. I'd go for the Alien Easy Feed system as it has the wider tubes that don't need as much maintenance. After spending to get a good fan and controller T6 to regulate the tent and humidity, it seems natural to regulate the feeding as well, so you have a set table and feed sheet to work from as you fine tune your nutes ratios.

@@tarotthehangman9961 grobucket is the same concept but you can put them in any 5 gallon bucket and even make an irrigation system with an add on

@@ballamaniac6984 GrowBucket sucks because it uses up a gallon of media space in the bottom of the bucket.