12 COOL TOOLS THAT ARE REALLY WORTH BUYING

  Рет қаралды 2,327,453

TechZone

TechZone

Күн бұрын

Salty Popcorn ► goo.su/bnU7S
1) AX Ideas (Preview)
+
1.1 Orit B.V Handy-Man (Preview)
• ORIT B.V. - Sand Lime ...
• ORIT B.V. - ABH Brick ...
+
1.2 Orit B.V Octopus (Preview)
• ORIT B.V. - Lifting Cl... • ORIT B.V. - H-360 - H-...
2) Debarker PRO (Preview)
• Debarker PRO / Barkefr...
• Dolmar 9010 + Debarker...
• Кородер не бензопилу Х...
3) Jackman Brute Socket Fusion Power Clamp
• Jackman Brute Socket F...
4) Hilti CFS-SL
• HOW TO Hilti Brandschu...
• HOW TO install Hilti C...
• HOW TO install Hilti C...
• Sleeve Antifuoco CFS-SL
5) SpikeEase
• SpikeEase: The Best Sp...
• SpikeEase - Battery Op...
6) Lock Jaw Ladder Grip
• Lock Jaw Ladder Grip D...
• Swedish Fire and Rescu...
7) Kreg Panel Carrier
• Kreg® Panel Carrier
8) WORKPRO Cordless Reciprocating Saw
• WORKPRO® Tools | 20V C...
9) Hyde Tools 4-Inch Roller
• Hyde Tools 4-Inch Roll...
• Hyde Tools 4-Inch Roll...
10) Kreg® Quick-Flip (Preview)
• Kreg® Quick-Flip
11) WEICON Tools Fibre Optic Stripper (Preview)
• Schnelles Entfernen vo...
• Abisolieren feinster D...
12) RUNPOTEC Cable guide roller
• RUNPOTEC Cable guide r...
00:00 - Lock Jaw Ladder Grip
01:03 - RUNPOTEC Cable guide roller
02:03 - Hilti CFS-SL
02:59 - AX Ideas + Orit B.V
04:00 - Debarker PRO
04:53 - Jackman Brute Socket Fusion Power Clamp
05:39 - Kreg Panel Carrier
06:41 - WORKPRO Cordless Reciprocating Saw
07:40 - Hyde Tools 4-Inch Roller
08:45 - Kreg® Quick-Flip
09:28 - WEICON Tools Fibre Optic Stripper
10:26 - SpikeEase
For copyright matters please contact us at: copymanager.mn@gmail.com Dance of the Pixies by Machinimasound licensed under Creative Commons Attribution 4.0 int’l / @incredible-qq2zi

Пікірлер: 276
@TROOPERfarcry
@TROOPERfarcry Жыл бұрын
I appreciate trying to make a ladder safer, but gutters are not strong. I don't care if the gutter gets damaged, I just mean that even though the ladder is clamped to a gutter, that doesn't mean the ladder is secure.
@Nvable
@Nvable Жыл бұрын
I came here to post similar.
@joesmith4494
@joesmith4494 Жыл бұрын
Why wouldn't one just use vice grips. It's a stupid product
@deucedeuce1572
@deucedeuce1572 Жыл бұрын
Was thinking the same. It's not just the weakness of the gutters either, but also the gutter spikes and the wood they're hammered into. Have seen gutter failures from ladders being tied off on them (and the accidents that resulted by the failures).
@eduardojaimes9201
@eduardojaimes9201 Жыл бұрын
I also agree but I think it’s meant to stop your ladder from sliding from side to side but the gutter won’t protect you if thhe ladder falls back since it’s that weak
@myfirstcrappyvideobilly
@myfirstcrappyvideobilly Жыл бұрын
I was just saying that the load would only be what the gutter can hold not the ladder or the clamp. That's the weakest link.
@Geoff_G
@Geoff_G Жыл бұрын
At the 9:00 mark, that drill driver set is pretty much the same as the Makita kit I bought 30 years ago.
@gingerturtle4229
@gingerturtle4229 Жыл бұрын
Ladders shouldn’t be touching the gutters at all during access to avoid potential damage as guttering has very little load bearing strength. That’s why I carry stand off bars that attach to the ladder tops and support off brickwork etc…the only way to be sure is to fix an eyelet into mortar and rope your ladders in place.
@PROProcesss
@PROProcesss Жыл бұрын
At 6:16 you can get the board out of the trunk without any tools 😅😅
@Alex-mt9ir
@Alex-mt9ir Жыл бұрын
😂😂 really
@ivanmanalo9536
@ivanmanalo9536 Жыл бұрын
Pretty cool combination using chainsaw and having a shaver in one tool very brilliant idea nice combo
@muddymatt1981
@muddymatt1981 Жыл бұрын
On below posts, there has been some criticism on the ladder clamp. I own a construction company and had a ladder blow sideways in a strong wind. No one was hurt, but I did buy one of these items. It is not intended to keep people from shaking it hard back and forth as was depicted in the video. It keeps the ladder secured to the building in the case of strong winds, one leg settling/sinking into the ground a little, and it does help employees with the transition of going from roof to ladder. Just some real world feed back. I use it for my 40’ extension.
@thomasmurray146
@thomasmurray146 Жыл бұрын
Thank you for that
@wsfwsf1497
@wsfwsf1497 Жыл бұрын
I don't know if I'd be going up if the wind is strong enough to blow over an alum/fiber ladder. If an emergency, ok.
@squirrelleader771
@squirrelleader771 Жыл бұрын
Op has obviously no gutter experience. The clamp is a safety hasard. No experienced constitution worker will lean a ladder against a roof. There's no point of damaging a gutter to get on a roof. No one in the gutter trade would support this device. There's a reason they make stand outs - stand offs. Only hacks would use this. A gutter is not designed to hold a person's weight. Period. Only inexperienced people would argue. I couldn't tell you how many spikes I've pulled out by hand. How many runs I've just yanked down removing the old. How many dents I've seen from people putting a ladder on a gutter, even when they think they're being smart putting something soft in between. Gutters are not made to support a person!!!!
@myronstutzman1344
@myronstutzman1344 Жыл бұрын
​@Squirrel Leader what the hell is a constitution worker, as a construction worker I've leaned a ladder against many gutters, after many years I've still never had a problem (probably because I do it right), so get off your self righteous high horse Karen
@whochecksthis
@whochecksthis Жыл бұрын
​@wsf wsf when the work is scheduled, you do it... only excuse to avoid the job is lightning... A clamp to prevent ladder falling over is a good product.
@jimbobbiocarumba1770
@jimbobbiocarumba1770 Жыл бұрын
Reciprocating saw? Ooooooooooohhhhh!! This is Jetson's Space Age stuff here. Next up -- The Cordless Screwdriver.
@TROOPERfarcry
@TROOPERfarcry Жыл бұрын
9:00 -- I have one of these that was made by DeWalt. I got it maybe 6 years ago. I used it when screening in my back porch, and I found it invaluable for speed and convenience. Drill the hole... counter-sink it... then drive the screw. That used to be three distinctly different steps, where it actually made sense to -- no joke -- buy three different drills, because otherwise you'd be swapping between bits on each screw. At any rate, Kreg isn't the only manufacturer of this tool, and it isn't a new tool, either.
@waynedrummond6583
@waynedrummond6583 Жыл бұрын
Have you not heard of countersinking screws?
@shaggywheels518
@shaggywheels518 Жыл бұрын
Attaching a ladder to a wobbly gutter, that really make sense... 😅
@missrosie4c
@missrosie4c Жыл бұрын
No
@mattheweburns
@mattheweburns Жыл бұрын
I work in construction and I love these videos. Some of these items are kind of ridiculous, but a lot of them are very practical a few of them. I actually want to buy.
@trump45and2zig-zags
@trump45and2zig-zags Жыл бұрын
You don't set ladders on the gutters!!
@mrshort2379
@mrshort2379 Жыл бұрын
great content: the problem with cool tools and inventions is the MSRP, nobody has a poor in mind. they all just want that money. that is why I and many others like knock-off companies.. the knock-offs may not be as good, and some better, but the thing is they are cheap enough for a poor to buy.
@redcorset
@redcorset Жыл бұрын
Problem with the gutter clamp is the gutter will not support that much weight in a fall. You just wind up dragging crap down on top of you.
@ruffxm
@ruffxm Жыл бұрын
It's not designed to SUPPORT a fall...It's designed to prevent the ladder from sliding side to side or pulling away and CAUSING a fall as your transitioning from the roof to the ladder.
@Roy_Tellason
@Roy_Tellason 13 күн бұрын
Some neat stuff there, but those prices are ridiculous!
@gada39
@gada39 Жыл бұрын
As many agreed here, the gutter is probably weak. A secure connection to a weakness takes away from your reaction time. Just use a bungee, it gives time to react to side to side slip. For those that are using a product to keep the ladder from falling back while on it, the ladder was too short.
@ricknick5318
@ricknick5318 11 ай бұрын
Sometimes when carrying materials of the ladder you don't want to have to move around the top of the ladder so it's better to have it fastened basically as you can just walk right up on the roof or up on the surface you're going to
@ricknick5318
@ricknick5318 11 ай бұрын
But you're not wrong it should be four to five runs above the plane and standing at the bottom you should be able to stand with your feet at the bottom step reaching out with your arms straight in front of you and touch one of the rooms of the ladder level arms level I mean
@ricknick5318
@ricknick5318 11 ай бұрын
Took a couple OSHA test?
@marc6919
@marc6919 Жыл бұрын
I think Milwaukee makes every kind of tool imaginable for people who hate to work hard but need too work harder
@JRo250
@JRo250 Жыл бұрын
Thank you for switching to Metric but also keeping Imperial units on the video. I believe this helps cross referencing and hopefully ease the conversion to Metric one day.
@vampritt
@vampritt Жыл бұрын
a chinese guy watching this channel... 1 week later, same stuff, cost 1/20 of the original price
@louisvl10
@louisvl10 3 ай бұрын
recipro saw is a must have fr my fav use is for pruning trees and removing roots, it works sooo good for that
@billprezioso3677
@billprezioso3677 Жыл бұрын
Been painting 40 years and I can’t think of a possible use for the angled mini roller that I couldn’t do with a regular one.
@ErgonBill
@ErgonBill Жыл бұрын
Industrial steelwork touchups maybe. Cheap enough to throw in the kit. I have one that accepts a brush and it's saved a lot of time over the years.
@BernhardSchwarz-xs8kp
@BernhardSchwarz-xs8kp 4 ай бұрын
The only difference is - you are not making money by selling the angled version.
@Noneyobusiness851
@Noneyobusiness851 Жыл бұрын
What freaking genius came up with the idea to clamp the ladder to the gutter that is the stupidest thing I've ever seen.😮
@CynthiaWord-iq7in
@CynthiaWord-iq7in Жыл бұрын
Yes, they are as sturdy as tinfoil.
@Equals488
@Equals488 2 ай бұрын
Don't trust a gutter. The header board maybe rotten and pull off. The device may help stop the latter from sliding off sideways.
@dragonflytoo
@dragonflytoo Жыл бұрын
The market has gone insane.$$$$$$$$$$$$$
@regorttoccs
@regorttoccs 3 ай бұрын
Ladder gutter clamp is a sure fire way to break the seam seals especially the corner seals.
@neilchilders5442
@neilchilders5442 Жыл бұрын
Now you have an ER visit and have to replace a vinyl gutter held on with 10 wood screws.
@monkeybarmonkeyman
@monkeybarmonkeyman Жыл бұрын
I can see spike-ease being quite the tool for anyone wanting to derail trains. Hopefully they are not available to the public. Someone that motivated though would likely create their own version.
@eddiehenrik4869
@eddiehenrik4869 Жыл бұрын
The Debarker at 04:03 is just what I need for the wife's toenails.
@robertritter9018
@robertritter9018 Жыл бұрын
For the ladder we always use a bungy cord. Hook into the gutter, wrap around a rung hook on the gutter again.
@apfelbasket
@apfelbasket Жыл бұрын
Do NOT mean a ladder against a gutter! Professionals will lean it with extenders against the side of the building. It would damage & break the gutters which could cause the ladder & person to fall & could cause death!
@guysolis5843
@guysolis5843 6 ай бұрын
I used to have to climb on people's roof and my consideration to the home owner was to not scratch up and bend their gutters. Good idea here but I prefer ladder jacks spread wide on the actual roof. That new fangled Sawzall? I better get one. I already have 3 different types in my collection? The 4 inch roller is a mystery? My wrist does EXACTLY what this contraption does. Save a wrist and buy this thing. The Kreg Quick-Flip looks like a tool to have. The Fiber Optic strippa looks like a fine and useful tool. I would have one even though I don't need it. Be the first on my block principle! Spike Ease is a back saver. I seen a machine that rode on the tracks and it could reach over, grab a tie and shove it under the tracks so precisely. I watched for about 10 minutes, pretty awesome.
@johnsumner6185
@johnsumner6185 Жыл бұрын
Love the ladder lock device, the guy installs and removes it AT THE ROOF!!
@squirrelleader771
@squirrelleader771 Жыл бұрын
Obviously no gutter experience....☝️
@AbleMan.2178
@AbleMan.2178 Жыл бұрын
Good video. I need a couple of these.
@coreyjameshaims449
@coreyjameshaims449 Жыл бұрын
That ladder lock 😂 Sure IT can withstand 100kg but that flimsy ass guttering ain't going to hold a feather 😂😂😂
@johnwalenski1555
@johnwalenski1555 Жыл бұрын
Love You Tube, there's countless great informational videos out there. This ain't one of 'em.
@nathanbay6783
@nathanbay6783 Жыл бұрын
"Mini jumbo roller"😂 I have/use a similar debarker for making fence posts. I also know people with small mills who use them to save wear and tear on their blades. I also have been using battery powered Sawzalls for about 30 years.
@jasonrainsbury2828
@jasonrainsbury2828 Жыл бұрын
Gutters are never safe i cleaned windows & gutters for years .
@chadpeterson1457
@chadpeterson1457 Жыл бұрын
You don't put ladders on rain gutters. (33 years of ladder experience)
@akproductions8401
@akproductions8401 Жыл бұрын
No one uses ladder arms literally no one
@squirrelleader771
@squirrelleader771 Жыл бұрын
This
@MJTVideos
@MJTVideos Жыл бұрын
The Hilti product is meant to stop fire and smoke spread through firewalls, not really for climate control. Those tubes seal when it gets hot in a fire, and prevent fire from traveling through for several hours
@email4dj
@email4dj 6 ай бұрын
?? Here's an amazing reciprocating saw that runs on batteries and uses blades! What a breakthrough! Plus a double ended drill with countersink, like the one I used in the 80s! I guess we've just given up on the futurism and we're publishing anything that's submitted now . . . we're no longer pretending this is anything more than free advertising.
@dirtyworxinc8858
@dirtyworxinc8858 Жыл бұрын
lol ladder tips over so does the gutters ..... nota good choice
@barryharper7653
@barryharper7653 3 ай бұрын
I’ve been looking for a good spike removal tool!
@toddtourville984
@toddtourville984 Жыл бұрын
A 2-hour quick charge, is not a quick charge.
@apfelbasket
@apfelbasket Жыл бұрын
American code prevent using strippers by twisting them around a wire. It leave a groove & weakens it & is a FAIL point!
@madlifeus
@madlifeus Жыл бұрын
*machines are amazing*
@dgulssmith4063
@dgulssmith4063 Жыл бұрын
I love how this channel always cheers me up no matter what. Kudos!
@HeWhoIsWhoHeIs
@HeWhoIsWhoHeIs Жыл бұрын
Cheers you up with tools you'll likely never need?
@Brian-jz1pi
@Brian-jz1pi 11 ай бұрын
A painters ladder stabalizer setting on the roof protects gutter and is very stable
@duocvo1984
@duocvo1984 7 ай бұрын
❤ i like ...verry good
@deucedeuce1572
@deucedeuce1572 Жыл бұрын
2:12 ... Imagine if it could put temporary holes in the wall that go away as soon as you remove it (like in magic tricks and cartoons). That would be one of the most useful devices ever invented. I'm certain it's possible, but I doubt we'll see it in the next 20 years. You never know with science though. Many inventions were once thought to be impossible (if not most modern inventions, like TV, computers, music/video players and electricity altogether... and cars, airplanes and possibly even glass at one point in time.
@unfundedopportunities7278
@unfundedopportunities7278 27 күн бұрын
You never put ladders against, or clamp onto, gutters. Gutters are not made for that. Use a "ladder stabilizer" against side of house or roof.
@johndaly8060
@johndaly8060 Жыл бұрын
I enjoy looking at these videos but most of the items covered are not new or practical but you never know when the perfect idea could surface! Their railway spike remover got my interest today. I don’t know much about railway spike removal but this unit is driven by a cordless drill. Between spike removals I assume one has to reset it back to the start position which takes time and was not shown. I think the old fashion prybar approach would be as quick if not quicker and weigh about the same as this contraption and not need a power supply?
@scottnunya2441
@scottnunya2441 Жыл бұрын
I would assume it has a spring driven release to return it to the "remove" position. Just an assumption though.
@russellleininger5700
@russellleininger5700 Жыл бұрын
Korea hypothetically got the bid
@toddtourville984
@toddtourville984 Жыл бұрын
A bucket hook on the roller is outright moronic. What "guineas" came up with that? One that never painted before except with an easel.
@buckwheat6722
@buckwheat6722 Жыл бұрын
EXCELLENT! Thank You!🤠
@williamadams5179
@williamadams5179 Жыл бұрын
I like them all
@cowboy6591
@cowboy6591 Жыл бұрын
Trouble is: The gutter can't take the weight. And the prices of all this stuff is highway robbery.
@NASTXL
@NASTXL Жыл бұрын
I have those Kreg panel carriers and they are awesome! But I’m a big dude as in 6-4 and 255. If you’re a shorter guy I don’t know if they’d be as useful because you’re trying to press the weight where as for my I can just shoulder it.
@ruffxm
@ruffxm Жыл бұрын
Is it ok for sheetrock or will it crush it?
@NASTXL
@NASTXL Жыл бұрын
@@ruffxm Use them for sheetrock all the time.
@ruffxm
@ruffxm Жыл бұрын
@@NASTXL thanks
@nwelshans
@nwelshans Жыл бұрын
Ez-path over Hilti sleeves. The opening of Hilti sleeves and not closing them means the fire protection is missing and easy to forget. In applications like hospitals they will get checked by joint commission and heavy fines occur if they are left open. There is no closing an ez-path it just works.
@roberthesse157
@roberthesse157 Жыл бұрын
So didn't think about gutter guards on top of gutters to keep leaves and debris out now did they. Mine are covered.
@nastyfall2009
@nastyfall2009 Жыл бұрын
Great vid, keep it up guys!
@jakegorman7121
@jakegorman7121 11 ай бұрын
Wow I never seen a sawzall before holy cow
@tinacheez1450
@tinacheez1450 Жыл бұрын
Wow. This did not go as I expected
@DewaldtdeKlerk
@DewaldtdeKlerk 2 ай бұрын
Did the guy on the ladder really tie homself off to the top of the ladder? Osha has become absurd!
@craigcorson3036
@craigcorson3036 Жыл бұрын
NOBODY who works with tools would use a SAW to remove those nails. They would use a claw hammer and just pull them out. There are circumstances in which one would cut nails with a saw, but not in the one shown.
@steveroman3729
@steveroman3729 Жыл бұрын
When we were hanging drywall in areas after demo, we would cut any excess of nails sticking out. Time is money and nobody has the time to pull each nail out, so we cut them off.
@clumpkin1012
@clumpkin1012 Жыл бұрын
That debarker looks dangerous.
@garykenyon3908
@garykenyon3908 2 ай бұрын
These are some neat tools but awfully expensive.
@kihmjones2176
@kihmjones2176 Жыл бұрын
instead of the gutter clamp get a few helium balloons as they are more dependable 😁 The clamp should grab the eve of the roof and the roof it self at the truss below and SCREWED IN
@SunildaArboleda
@SunildaArboleda 2 ай бұрын
Maravilloso
@rockerjim8045
@rockerjim8045 Жыл бұрын
Railway “spikes” are so 19th Century. Pandrol clips are the future
@garrisonaw
@garrisonaw Жыл бұрын
Brick tongs 3:07 have been around since 1925 (at least that's when they were patented). 98 years later, they're not exactly a novel idea. They're hardly what I'd call a "cool tool". Yes, they're useful... for their intended purpose. But they're only a "must buy" tool if you're actually a brick layer. Same goes for most of these tools. They're only useful if you're in a very specific line of work. And if you are in such a specific line of work, you're almost certainly not watching youtube videos to find out what tools you should be using.
@jeusgarcia8597
@jeusgarcia8597 Жыл бұрын
*BEST COMMENT ON THIS THREAD*
@jeeptrucklover72
@jeeptrucklover72 Жыл бұрын
I had to laugh at the gutter clamps. Do you think I’m going to put my faith and life on those things? Ha! You’d be better off tying a string around the ladder. It’s the same concept.
@farmerbrown3768
@farmerbrown3768 Жыл бұрын
I’m going out and buy that spike puller right away??………oh, wait, I don’t have a rail road yet!
@MR-puffnstuff
@MR-puffnstuff Жыл бұрын
How much weight does a gutter hold not a hundred pounds lol.
@ppdan
@ppdan Жыл бұрын
10:29 Well that comes a little late, those spikes have been replaced with screws ages ago!
@whochecksthis
@whochecksthis Жыл бұрын
? Hmm... all the tracks I see still use spikes, but even if correct, the tool should speed up the switch to spikes. Now... I dont know who watching this video would need a railroad spike removal tool...
@ppdan
@ppdan Жыл бұрын
@@whochecksthis Well it's time to "update" those tracks because I cannot find a single spike on railroad tracks here (even those old abandoned tracks here have screws instead of spikes)
@Dovie170986
@Dovie170986 Жыл бұрын
Worth buying really 😂
@taylortaylor6845
@taylortaylor6845 Жыл бұрын
The painting roller looked like you couldn’t get any pressure
@davidhakadoober._1-
@davidhakadoober._1- Жыл бұрын
What I want to know is where they get the extra I they use in aluminum 😆
@bernardkavanagh3528
@bernardkavanagh3528 Жыл бұрын
0:41 Imagine Fred Dibnah looking at this guy 🤣🤣🤣
@maddawgnoll
@maddawgnoll 11 ай бұрын
The gutter clamp is the dumbest idea. I had the gutter break on my 2 stories up and landed flat on my back on top of the ladder.
@brainfarth
@brainfarth Жыл бұрын
Dude was crooked @8:59 and I'm certain the screw showed it @9:02 ;)
@MM-rr1kp
@MM-rr1kp Жыл бұрын
so not only do you fall , you also rip the gutters off the house
@ryancampbell2840
@ryancampbell2840 Жыл бұрын
The debarker would be useful on folks who abuse children
@CynthiaWord-iq7in
@CynthiaWord-iq7in Жыл бұрын
TAKE THIS POST DOWN PSYCHOPATH SHARING IDEAS.
@ryancampbell2840
@ryancampbell2840 Жыл бұрын
@@CynthiaWord-iq7in why are you so offended? Do you abuse children or something? You are sick.
@rlr4294
@rlr4294 7 ай бұрын
What kind of fools do they take us for Gutter may kill you when they fall on top of you once the clamps pull them down !
@karlakrobertson8504
@karlakrobertson8504 Жыл бұрын
Also who's not using ladder arms to avoid crushing the gutters
@squirrelleader771
@squirrelleader771 Жыл бұрын
This
@terrellstewart4071
@terrellstewart4071 Жыл бұрын
Some of these items are useful but the prices on a gamble or questionable product is crazy
@marcusseal4372
@marcusseal4372 Жыл бұрын
he's not using three points of contact on the ladder lol
@JJ73100
@JJ73100 Жыл бұрын
very expressive keep it
@russellleininger5700
@russellleininger5700 Жыл бұрын
A billion tools every year is over
@herdHistruth
@herdHistruth Жыл бұрын
0:44 what about gutter guards that keep debris from the gutters 🤔🤦🏼
@MrSpearp
@MrSpearp Жыл бұрын
Would be nice to know where we could buy some of this stuff
@djobitwan7
@djobitwan7 Жыл бұрын
I just put the name in that they showed on this video & a lot are on Amazon & not too bad for pricing. I got that Kreg Panel carrier for $24.
@scubatrucker6806
@scubatrucker6806 Жыл бұрын
Love the de-barker
@EvanIsmail4115
@EvanIsmail4115 Жыл бұрын
👍👍👍👍👍👍
@JB-nf8nk
@JB-nf8nk Жыл бұрын
What do you think people do for a living that these "are really worth buying"? I have a panel carrier and a saws-all, because I'm a normal human being, but I guess the next time I need to un-spike some rail road ties...
@russellleininger5700
@russellleininger5700 Жыл бұрын
Do you think they took over every single chiropractor's office in america
@shriker5969
@shriker5969 Жыл бұрын
Did that man just countersunk a lenshead screw instead of countersunk screws?
@ptick16
@ptick16 Жыл бұрын
Someone should send a few hundred of the rail track spike removal tool to the Ukrainians. I'm sure that they would find a good use for them!
@youtubetv7000
@youtubetv7000 Жыл бұрын
SUPER
@Procrastinator1948
@Procrastinator1948 Жыл бұрын
And this would work how if gutter guards are installed?
@RobW-AU
@RobW-AU Жыл бұрын
Ummmm the guy taking off the ladder safe thing broke rule number one. 3 points of contact on the ladder. His safety tool required him to use both hands to secure it to his waist so very unsafe 🤷🏼‍♂️🤷🏼‍♂️
@timothyjacks1788
@timothyjacks1788 Жыл бұрын
Those rollers are a rip off when you can make them yourself for a tenth of the price there asking
@mathewjonesmercado7631
@mathewjonesmercado7631 Жыл бұрын
hi
AMAZING TOOLS YOU SHOULD KNOW ABOUT
19:41
TechZone
Рет қаралды 24 М.
25 COOL TOOLS YOU DIDN'T KNOW ABOUT
15:02
TechZone
Рет қаралды 314 М.
🌊Насколько Глубокий Океан ? #shorts
00:42
Can teeth really be exchanged for gifts#joker #shorts
00:45
Untitled Joker
Рет қаралды 15 МЛН
Ingenious Construction Workers That Work Extremely Well
16:21
WOW Tech
Рет қаралды 342 М.
Handyman Tips & Hacks That Work Extremely Well
36:38
Impressed
Рет қаралды 216 М.
Amazing Tools That Are On Another Level
25:16
WOW Tech
Рет қаралды 452 М.
These Coolest tools are brilliant award winners (in Action)▶ 63
51:21
Most Satisfying Videos Of Workers Doing Their Job Perfectly
20:51
WOW Tech
Рет қаралды 3,3 МЛН
70 INVENTIONS ON A WHOLE NEW LEVEL
1:02:33
TechZone
Рет қаралды 2,5 МЛН
Construction Tips & Hacks That Work Extremely Well
24:55
Trending Machine
Рет қаралды 4,2 МЛН
16 COOL TOOLS YOU SHOULD KNOW ABOUT
15:06
TechZone
Рет қаралды 1 МЛН