12 Harbor Freight Fishing Hacks ( Save money)

  Рет қаралды 389,477

Fishin N Stuff

Fishin N Stuff

Күн бұрын

Ta Day we are going over some awesome fishing Gear ideas, that will help save you some money, this is the second video ive made on this subject.
Thanks for watching and subscribe and click the bell for notifications of new content ( it's totally free)
---- FOR VIDEO PARTS LIST CLICK LINK BELOW‐--
‐---------------------------------------------------------------------------------
www.amazon.com/shop/fishinnst...
For Fishin N Stuff Gear visit the Link below
HATS
DECALS
SHIRTS
www.etsy.com/shop/PebsPrettyf...
To save 20% off of any ,,,,,,,,,,,,Hybridlights,,,,,,,,,
Go to
For an Awesome welder that does everything
Check out the link below use code,,,,,,,,, FISHIN ,,,,,,, To receive a 10% discount on top of the automatic. 15% discount the website gives you
www.ssimder.com/products/sd40...
For Hybridlights 20% discount use this link
hybridlight.com/discount/Fish...
enter code below
FishinNstuff
For 20% off purchase
Thanks for watching dont forget to subscribe and click the bell for notifications
For 10% off of Katfish Clothing click on the link below
For some Awesome BlackLights fit fishing. And 10% off of them use this link
neonicblacklight.com/?ref=ziQ...
Then at checkout use code. FishNstuff
www.katfishclothing.com/?ref=Fishinput
Enter Code. FishinNstuff at checkout for 10% off all purchases
For 10% OFF of every purchase
On products at
CATCH THE FEVER RODS
use code
FishinNstuff
At checkout ...............

Пікірлер: 347
@FishinNStuff
@FishinNStuff 2 ай бұрын
Come join the Facebook group facebook.com/profile.php?id=61558130857445&mibextid=ZbWKwL If you don't do Facebook go to my shorts channel youtube.com/@FishinNStuff2shorts?si=zybX_9KaTxSPJwfq
@jeremybahm2163
@jeremybahm2163 2 ай бұрын
I would but don't do Facebook
@FishinNStuff
@FishinNStuff 2 ай бұрын
@jeremybahm2163 it's ok im thinking I might start a KZfaq shorts channel to put em on
@FishinNStuff
@FishinNStuff Ай бұрын
Ill put them on the shorts channel as well​ youtube.com/@FishinNStuff2shorts?si=zybX_9KaTxSPJwfq
@johnkimberl4222
@johnkimberl4222 2 ай бұрын
Bought a pair of the Quinn scissors a few months ago. Cut everything from fishing line to sheet aluminum still sharp. Keep em comming!
@farmingfishingfamilyontari2814
@farmingfishingfamilyontari2814 2 ай бұрын
Those baseball clips Get me every time. Great video.
@markriederer8896
@markriederer8896 2 ай бұрын
Great video, love the threaded inserts
@larryblackmon2341
@larryblackmon2341 2 ай бұрын
I think this is my favorite of yours yet! My family has been using the Harbor Freight chairs while camping and we love them. I bought the Doyle nut setter to screw pvc pipe to a metal locker and add a shelf but have it modular. Thank you for the added optimism that it might work! Either way, as my grandfather would say, it will either work or we'll learn something from it! Both bring improvements to our life!
@joebuck66
@joebuck66 2 ай бұрын
Great ideas Keith. Thanks!
@MakeItLookEasy202
@MakeItLookEasy202 2 ай бұрын
ONCE AGAIN MY GUY!! THANK YOU FOR YOUR CREATIVITY!👏🏾👏🏾
@josephdunivan9432
@josephdunivan9432 2 ай бұрын
Thanks so glad to have new videos
@timholsworth316
@timholsworth316 2 ай бұрын
Always entertaining and interesting!! Thanks!
@JohnSmith-ih9rh
@JohnSmith-ih9rh 2 ай бұрын
You always do great videos. Love to watch them. Thanks!!
@FishinNStuff
@FishinNStuff 2 ай бұрын
Thank you
@MrTarHeelUNC
@MrTarHeelUNC 2 ай бұрын
Wooooo weeeeee totally awesome! Be Blessed and fish on.
@johnbaker4847
@johnbaker4847 2 ай бұрын
Gotta love Harbor Freight and Gotta Love You... Always looking forward to your next video. 👍😊❤️🎣🇺🇲🙏
@FishinNStuff
@FishinNStuff 2 ай бұрын
Thank you John
@larryabrams3559
@larryabrams3559 2 ай бұрын
That's pretty awesome. Love the kids.
@marionmcvey9703
@marionmcvey9703 2 ай бұрын
All good, especially the clamps.
@nsargeant84
@nsargeant84 2 ай бұрын
Awesome video as always. Just to let anyone know, this model ultrasonic cleaner you have to push the button to turn the heater off as well. The timer will not shut it off. If you do nothing it will evaporate your chemical and then melt your plastic tray.... learned the hard way lol
@johnbaker4847
@johnbaker4847 2 ай бұрын
😱🙀🤯
@johnbaker4847
@johnbaker4847 2 ай бұрын
not in the book?
@nsargeant84
@nsargeant84 Ай бұрын
@@johnbaker4847 Don't recall reading that lol
@ElTeerino
@ElTeerino 2 ай бұрын
That threaded rivet hack was awesome. Picked up the kit today.
@gethookedondeefishin9247
@gethookedondeefishin9247 2 ай бұрын
Awesome video as always! Great picture of Fields to Water!!!!!
@FishinNStuff
@FishinNStuff 2 ай бұрын
😂 I'm sorry Dee lol
@peterhipwell4632
@peterhipwell4632 2 ай бұрын
Great video those scissors are awesome Bless yah keep ‘Em coming
@sheepdogtanker4651
@sheepdogtanker4651 2 ай бұрын
That's allot of great info, thank you.
@freesteez3
@freesteez3 2 ай бұрын
Love your videos, love fishing, and love some harbor freight
@roykilo9642
@roykilo9642 2 ай бұрын
thank you for the laughs and incites...
@user-hc2nx6yr6b
@user-hc2nx6yr6b 2 ай бұрын
Great content. Keep it up. I learned of a few new products that I will keep an eye out for....
@roberttolley5055
@roberttolley5055 2 ай бұрын
Always a pleasure to watch you sir!! 😊
@FishinNStuff
@FishinNStuff 2 ай бұрын
Thank you very much
@OldJoe212
@OldJoe212 2 ай бұрын
Ultrasonic tip. Only use clean water in your cleaner. You can put your part in a plastic bag with a solvent in the water. The vibrations will travel through the bag. This way, you can use the cleaner for other stuff that you don't want in a harsh solvent, i.e. dentures. KZfaqr, Steve's Small Engine Saloon taught me this.
@FishinNStuff
@FishinNStuff 2 ай бұрын
That's a good idea
@tuckerpmt
@tuckerpmt 2 ай бұрын
Glass jars is what I've always been told, but plastic bags are way more convenient. Have you ever had one break in the cleaner?
@JoeMartinezVer2.0
@JoeMartinezVer2.0 2 ай бұрын
Man I'm hooked 😁 Love your videos brother. So many great ideas.
@FishinNStuff
@FishinNStuff 2 ай бұрын
Thank you
@bitumenjunkie2435
@bitumenjunkie2435 2 ай бұрын
G'day mate haven't checked ya show out for ages, still a great stich up 😂 keep up the great work 👍🏼
@conrailfan6277
@conrailfan6277 2 ай бұрын
Great video Keith, hey Menards carries big jugs of mean green, I buy it for spray bottles, it does a bang up job of cleaning the bugs off my windshield in my Semi in the summer months!!!
@brianhoyt2469
@brianhoyt2469 2 ай бұрын
Great video and so glad to see new content up it feels like it’s been a while. Love the channel and I’m always checking to see if I got notifications of a new video. 👍🏻
@FishinNStuff
@FishinNStuff 2 ай бұрын
I posted 11 days ago I think
@CatfishWeekly
@CatfishWeekly 2 ай бұрын
Another great video Keith!!!!!!!!!!
@russhayes4882
@russhayes4882 2 ай бұрын
That there was awesome !
@earthatationzebra
@earthatationzebra 11 күн бұрын
Great job on your video ! humor appreciated !
@FishinNStuff
@FishinNStuff 11 күн бұрын
Thank you for watching
@brianlykins6663
@brianlykins6663 2 ай бұрын
Another good one, Keith. Did not know there was marine heat shrink. That's pretty cool. Some pretty good hacks. Aught to something in there for everybody. Nice to see cranky still hanging around. God bless ya'll and stay safe on your trips to Harbor Freight.
@kaboom4679
@kaboom4679 2 ай бұрын
You should see the stuff I work with . It's 2 1/2" diameter before you shrink it and makes a pretty good armour for axe and shovel handles .
@Jimmyfisher121
@Jimmyfisher121 2 ай бұрын
Marine heat shrink I laughed so hard I almost did myself an injury, you do realise it is just hot glue inside the heat shrink, if you have hot glue just put some along the wire you are going to use so it still fits let it cool insert into heat shrink and do as normal, the glue melts at the same temp as the heat shrink, job done you will see the melted glue come out and it is sealed, good for any outdoor wiring.
@victortuten4399
@victortuten4399 2 ай бұрын
You always do a good job and I appreciate the effort you put into your work. Thanks for the effort and the great videos! I just got 2 spinning reels that must be 40 years old or older. Heading to Harbor Freight for a cleaner!
@OutdoorWickedAdventures
@OutdoorWickedAdventures 2 ай бұрын
Awesome bro! Definitely going to check out them scissors.
@Mike-gw9yt
@Mike-gw9yt 2 ай бұрын
The Danny de Vito clip! That was great!..... Id like to add the "sonic cleaner", you can do practically the same thing with a vibratory sander. Sticky back a jar to the pad and prop it up upside down. Works great.
@kentcostello5286
@kentcostello5286 2 ай бұрын
OMG about time. Me and my grandsons thought you fell off the face of the earth. We love your videos and channel because full of good information and hacks.
@outdoorsforachange
@outdoorsforachange 2 ай бұрын
There are only so many hacks, I imagine.
@FishinNStuff
@FishinNStuff 2 ай бұрын
I posted a video 11 days ago I think 🤔 . KZfaq is esky beef about not notifying some people , sometimes . 😒 8 days is the fastest I can make a video normally . 4 days to film it and 4 to edit it . I'd love to do it faster but I don't think they would be as entertaining.
@reedy1116
@reedy1116 2 ай бұрын
11 day turn around is amazing .... just sayin, you know what i'm sayin!
@jrice80sf49
@jrice80sf49 2 ай бұрын
No kidding I was wondering where these went.!! So stick around!
@dougbadenhop
@dougbadenhop 2 ай бұрын
Great video ! Instead of buying an ultrasonic cleaner, I got to thinking and used an old foot bath to do the same thing ! Works great ! I put the dirty parts in a separate container with the cleaning solution, for easy clean up !
@vinnietatick
@vinnietatick 2 ай бұрын
I fill the ultrasonic machine with distlled water and fill a plastic peanut butter jar with Spray Nine and dunk the jar in the water. Works exactly the same. When the detergent gets nasty I'm only replacing a few ounces of detergent. Y'know what I'm sayin'? You know what I'm sayin'.😉
@dougbadenhop
@dougbadenhop 2 ай бұрын
​@@vinnietatickI do the same thing. I didn't explain as well as you did . Thanks !
@dorothyyoung8231
@dorothyyoung8231 2 ай бұрын
I just gave a short talk at my quilt guild about Harbor Freight stuff I use for sewing!
@rea8755
@rea8755 2 ай бұрын
You got me laughing on the Abu Garcia reel😂. Blessings to the Harbor Freight men, Emanuel and Marcus!
@angryannie7916
@angryannie7916 10 күн бұрын
So glad I found your channel today!!!! Can't stop watching thanks for the hacks
@FishinNStuff
@FishinNStuff 10 күн бұрын
I'm glad you found it too and thanks for the support
@TideAndSeekFishing
@TideAndSeekFishing 2 ай бұрын
Awesome man. Keep up the good work :)
@GTOFERN
@GTOFERN 2 ай бұрын
Man i love your videos! And i don't even like fishing, but i really enjoy your content. Entertaining and informative. From a city slicker in Queens NYC.
@FishinNStuff
@FishinNStuff 2 ай бұрын
Thank you . I appreciate that . I try to do things that are practical for many applications . I appreciate you watching
@martyhiers9343
@martyhiers9343 2 ай бұрын
Cool video as always!
@basslesschap346
@basslesschap346 2 ай бұрын
Them hacks were Awesome !
@greyscout01
@greyscout01 2 ай бұрын
First time I've seen you. Fun stuff and some good ideas. Just subbed. Thanks.
@FishinNStuff
@FishinNStuff 2 ай бұрын
Thank you
@alanmccooker7829
@alanmccooker7829 2 ай бұрын
Dang your awesome brudda. Thank ya so much!
@jparks5662
@jparks5662 Ай бұрын
Never saw this guy before. Great stuff and hilarious. Thanks
@FishinNStuff
@FishinNStuff Ай бұрын
Thank you
@beerdrinker6452
@beerdrinker6452 2 ай бұрын
Great video. Thank you. I use an ultrasonic cleaner for my glasses.
@mariobatista9028
@mariobatista9028 2 ай бұрын
Keep them coming, those hacks!! Greetz from 🇧🇪👍
@StevenJarrett1961
@StevenJarrett1961 2 ай бұрын
Your editing is next level. Love your videos
@FishinNStuff
@FishinNStuff 2 ай бұрын
Thank you
@patcolston2901
@patcolston2901 18 күн бұрын
Thanks Keith Enjoy every video. Sharky is always funny. Thanks for the info.
@FishinNStuff
@FishinNStuff 17 күн бұрын
I like Sharky . I call him Cranky cause he's ummmm Cranky haha 😄
@ralphrickett5482
@ralphrickett5482 2 ай бұрын
Love your videos especially when cranky is in them.
@danieldougan8550
@danieldougan8550 Ай бұрын
The video is great and the fish Cranky makes it that much funnier
@tammyraley144
@tammyraley144 21 күн бұрын
You are awesome. Including children is awesome too! Cranky keeps me laughing!
@TheWeekendAngler
@TheWeekendAngler 2 ай бұрын
Awesome hacks, Keith! Thanks for the shout out, too!!
@FishinNStuff
@FishinNStuff 2 ай бұрын
Yes Sir thanks for the idea
@EZStudRack
@EZStudRack 2 ай бұрын
Great hacks…I learned a lot!
@dirtybuzzard5977
@dirtybuzzard5977 2 ай бұрын
👍👍👍Yea Sir Another Awesome Hack Video .. Ol Cranky 😆😂 . Stay safe Sir and Keep them Hacks and DIYs coming.. 👍👍👍👍
@shawnbodendorfer1867
@shawnbodendorfer1867 2 ай бұрын
Some good ideas 💡
@johnyhawgleg
@johnyhawgleg 2 ай бұрын
In the ultrasonic cleaner we use at work, we use Mr. Clean to clean our nozzles and electrodes for our powder coats guns. Usually only take 1-2 cycles to get them completely cleaned, then we just rinse them in tap water and dry them with compressed air.
@outdoorsforachange
@outdoorsforachange 2 ай бұрын
Thank you, sir!
@CuriousDisquiet
@CuriousDisquiet 2 ай бұрын
Glad we got someone showing that you don't need expensive fancy gear to catch fish. Earlier this week I went to the creek behind my house with my homemade cane pole and a hotdog soaked in coolaid, caught 3 little flathead catfish and 2 mid size dollar sunfish! I'm currently making a cast net from a dollar store mesh laundry bag and a bag of fishing weights I've had for years but never used. hopefully it works!
@Anna-tc6rz
@Anna-tc6rz 26 күн бұрын
I like using those mesh bags for a live well so i dont have to mess with taking the cooler out of the car.
@Jimaria1
@Jimaria1 2 ай бұрын
I have that same chair. I went to Wal-Mart and they have a do it yourself cup holder. I just cut a hole in the side table the appropriate size and used some silicone and instant cup holder!
@shaunmorris2722
@shaunmorris2722 2 ай бұрын
That's right yes Sir. Put the drill n da drill. Just a hunker hunker hunka love
@drunkwoodswyllia4885
@drunkwoodswyllia4885 2 ай бұрын
I don’t fish much at all anymore, but this video makes me want to go really bad!! Awesome video sir and very well executed!
@FishinNStuff
@FishinNStuff 2 ай бұрын
Thank you very much
@RollinRollinReelin
@RollinRollinReelin 2 ай бұрын
Hello again Keith! Man you really need to make more videos and post them more often. I always look forward to getting your videos! You always teach me something new and you always make me smile and laugh. Ive had more than six surgeries in the last two years so I need that mental and spiritual stimulation to give me something positive to redirect my mind on and you always give me that encouragement. Thank you brother! God bless you! I hope that I meet you in person one day and I get to fish with you or at least shake your hand and thank you in person. Im 60 years old and Im in a wheelchair due to being born with a spinal defect called spina bifida mylomeningocele. At heart i have a similar sense of humor as yours, but somedays its hard to see the humor in things. Thanks brother! God bless!
@FishinNStuff
@FishinNStuff 2 ай бұрын
Well I got my last 2 with in 11 days apart , I thought I was doing good lol . It takes like 3 to 4 days to film ( sometimes ) give or take . And the same amount of time to edit one . I try to do 1 a week . But it gets hard ..... I'll try to do better
@RollinRollinReelin
@RollinRollinReelin 2 ай бұрын
@@FishinNStuff Hi Keith! Man I'm sorry I didn't mean to make you feel bad ! I just love your channel. You do a great job of finding fishing related solutions and deals brother. Like I told you I'm disabled and on a fixed income of only about $1589.00 a month. I'm also on Medii-cal. That money goes fast. Like now. It's the 23rd and I have like $15.00 left in the account. And I have a savings account but at one point I had maybe $200.00 saved in my savings account. The government agency social security called me to tell me I had to use it within 30 days or they would cut off my monthly checks and force me to live on it until it was gone. They say you can own a house as long as you live in it but then they make sure you have no way of making or saving the money to buy a house. I did work at one job in customer service sales and credit management for 9 years but got carple tunnel and had to quit. Then I went back to college and worked hard for 5 years and was commuting on Access Services which is a transportation service for the disabled. I commuted 50 miles each way four days each werk to a college in Woodland Hills and finally graduated and found a job as an RVT for another 2 years until I had to quit to have a series of surgeries. I've had 6 surgeries in the last 2 years and I'm having another at the end of may just after my 61st birthday. I hope to go back to work as a Registered Veterinary Technician which is like a registered nurse but I work with animals. When I have worked they let me keep the first $65.00 I made but then they take HALF of everything I earn out of my disability checks. And many people think disabled people like me are lazy and don't want to work but the reality is people like me want to work but we can't afford to lose our Medi-cal. And they will cut you off of your medi-cal if you make a certain amount of money. The laws that apply to people like me were put in place in the 60s and have not changed much since then. Also I have a beautiful fiancee who is not disabled and is also am RVT but we found out if we marry they'll count our money together and I could not only lose my disability checks but also will lose my Medi-cal. Which I cannot do. So we've been together for almost 20 years but can't afford to get married because we'd get penalized. We even have the rings! It's crazy! Then if I were to die before her the government will come after her and force her to pay them back every penny I got in disability and every Penney they gave me in Medi-cal. With all the like over 20 total surgeries I've had in my lifetime the money they would force her to pay back would be millions! Anyway forgive me brother for the rant. I tell as many people about my situation as I can in the hopes that people will vote for laws that will change all this someday. And even with all ive told you here its only part of the story and challenges that I face in my reality. Maybe President Trump will change things. I can only pray! Thanks for all you do and for reading my rant. Take care Keith!
@FishinNStuff
@FishinNStuff 2 ай бұрын
@RollinRollinReelin no no I get it . All I was saying is I wish I could turn em out faster . But I would rather then be more enjoyable to watch . I rush I could make 2 a week . That would be awesome
@RollinRollinReelin
@RollinRollinReelin 2 ай бұрын
@@FishinNStuff they are all awsome! I never miss one of your videos and I can't think of one that I didn't enjoy or learn something from. I only wish I could see one of your videos every week sir. You even have me thinking about making videos for you tube. I'm a disabled 60 year old man with Spina bifida and in a wheelchair. I love to fish and I love to tie flies as well eventhough I'm not good at it yet because I've only been at it less than a year. I'd like to make videos that do two things. 1. Make videos showing other disabled people how to modify some aspects of fishing and things they can do and use to make it more enjoyable for them. And 2. Show non-disabled people that we are all the same nomater if we walk to the peir or roll to it. Keep em coming brother!
@joesharp5602
@joesharp5602 2 ай бұрын
Still one of the very best KZfaq channels for clever and well thought out Fishin Stuff and hacks that exists. I look forward to every video. I however like so many of us "older" gentlemen and ladies of course, retired and always nearly broke, have had to wean ourselves away from the now much higher priced Harbor Freight, and have had to look elsewhere to stretch an otherwise small dollar amount leftover at the end of each month. This situation which involves a growing number of Americans monthly (boomers retiring) makes this channel even more important, and allows us to keep the gear part of fishing fun and innovative. I appreciate the channel more than you know just for this, let alone the sheer entertainment value of each episode. Thanks for this... I lived in Asia for many years with my work in commercial Nuclear, and know well the current wholesale price of goods coming out of China of all qualities, and I can say there is no cost from China reason for Harbor Freight prices to have doubled for many things over the last five years. Crazy shipping costs (bulk container shipping) that started during Covid, and should have been temporary, have long been reversed by now, an are somewhat close to pre Covid pricing. Yet HF prices did not drop accordingly. Changing a good and very affordable product brand under the guise of creating a more quality commercial use product with a new fancy name, and phasing out the products that we all liked and could afford, is like putting lipstick on a pig, and has affected many of us Boomers and low income folks that cannot now afford many products at Harbor Freight. It is what it is and HF can do what they want, I just can't count on running over to HF expecting to afford a tool or consumable anymore. I hear this in the HF aisles from so many others as well. Too bad for many of us. I now rarely ever go to HF, and used to go there almost weekly if not more often, I never gave it a second thought, always was the best price there, you could count on it... not anymore.. Keep the great content coming, and thanks for suggesting other cheaper sources to allow your clever hacks to be made more inexpensively, it means a lot to many of us, perhaps more than you realize. With great respect.... Joe
@FishinNStuff
@FishinNStuff 2 ай бұрын
Thank you Sir , I try and find cheaper alternatives, and when I do I have a link in the description box that they'll be in
@mericanwit
@mericanwit 2 ай бұрын
Keep going 👍
@manuelfuertes5875
@manuelfuertes5875 2 ай бұрын
Lol love that lure
@ryanr6656
@ryanr6656 2 ай бұрын
Wrench Rings for stringer my favorite. Best out there
@Fixnstuffiswhatido
@Fixnstuffiswhatido 2 ай бұрын
Awesome video bro
@FishinNStuff
@FishinNStuff 2 ай бұрын
Thank you
@dawnengel3431
@dawnengel3431 2 ай бұрын
Love it!! Was awesome meeting you at catcon
@FishinNStuff
@FishinNStuff 2 ай бұрын
Awesome meeting you too 😊
@mikegentile13
@mikegentile13 14 күн бұрын
This was amazing! Threaded rivets!!!! What's that blue thing you dropped the rivet into to measure the hole size?
@ericcole2699
@ericcole2699 2 ай бұрын
Cutting a hole in the table of the chair makes great rod holder
@davidwestmoreland9490
@davidwestmoreland9490 2 ай бұрын
Great video, the reel about caused me to spit my biscuit out laughing.
@FishinNStuff
@FishinNStuff 2 ай бұрын
Lmbo
@thereelnredneck
@thereelnredneck 2 ай бұрын
Great video my friend
@davidb1327
@davidb1327 2 ай бұрын
You da man 👍🐟
@manuelfuertes5875
@manuelfuertes5875 2 ай бұрын
Love it
@michael1529
@michael1529 2 ай бұрын
Your best hacks yet
@justuschmiii3173
@justuschmiii3173 2 ай бұрын
TNX 4 VID LOL 😊
@jeromecalderone4526
@jeromecalderone4526 Ай бұрын
LOL two different reels in the cleaner nice one
@cg6348
@cg6348 2 ай бұрын
I don't fish and not planning to, but you've got some good ideas and information and I always learn something new. Plus, you're really funny and not just another handsome face. I'm just sayin. And dat is pretty cool.
@melinda5777
@melinda5777 2 ай бұрын
I love all your STUFF!!! 😂😂 ✝️🙏❤🇺🇸⛵👣🍍🤗
@kaboom4679
@kaboom4679 2 ай бұрын
Get a mesh tea infuser to put small parts in the ultrasonic cleaner .
@fishin-impossible2992
@fishin-impossible2992 2 ай бұрын
Who wooda thunk that Harbor freight was a fishing supply store, Man there were some great ideas in this video. I have made the camera mounts with the Clamps and they work out great. Awesome video Brother, keep pumping out the Great Content.
@FishinNStuff
@FishinNStuff 2 ай бұрын
Thank you Sir
@saltydawg8988
@saltydawg8988 Ай бұрын
Dad gum it, your content is too good. I had to subscribe.
@jeffjackson5331
@jeffjackson5331 2 ай бұрын
Very cool hacks!
@allenandmain
@allenandmain 12 күн бұрын
Cool job cranky
@FreedomFishing
@FreedomFishing 2 ай бұрын
Awesum 🙃
@ericporter4207
@ericporter4207 23 күн бұрын
YOU ARE AWESOME!
@FishinNStuff
@FishinNStuff 23 күн бұрын
Thank you Sir
@lesliemaness999
@lesliemaness999 2 ай бұрын
Cool video. How hot does that part cleaner get? Bet it would be good with mineral spirits and small springs, metal pins, and steel pipes 😊
@FreeAmericaChannel
@FreeAmericaChannel 2 ай бұрын
My Harbor Freight ultrasonic cleaner was dead after a dozen uses. Lasted maybe three weeks. You get what you pay for.
@jakeprochnow1833
@jakeprochnow1833 Ай бұрын
Had mine for the past 3 yrs and she still is rockin n rolling
@christopherstowe5666
@christopherstowe5666 Ай бұрын
You could’ve exchanged it. like any company sometimes you get duds
@larryhernandez531
@larryhernandez531 14 күн бұрын
Nice 👍🏽
@pawpawspiddle805
@pawpawspiddle805 2 ай бұрын
Love the channel. You know what I’m saying!! Hey they also have marine heat shrink tubing kit at Wal Mart. Ran across it tonight.
@FishinNStuff
@FishinNStuff 2 ай бұрын
Thank you
@stevegiblin270
@stevegiblin270 Ай бұрын
🐟 Fishing hack no. 90 Thanks!🇺🇸☘️😎
@charlesdriggers199
@charlesdriggers199 2 ай бұрын
I didn't know about them short scissors. I am getting me some of them.
@stingray4540
@stingray4540 Ай бұрын
Fish N Stuff is Alpha and he’s blastin!
@kylesmith3211
@kylesmith3211 2 ай бұрын
Thata the same clamp i was gonna use as an anchor clamp for my kayak.. i fish a pond with a lot of cattails and im thinking i can use that to anchor along them or a low tree
@finnsnracks2085
@finnsnracks2085 2 ай бұрын
Just subbed man i love your channel, id love to get to know you, you seem like a great guy
@FishinNStuff
@FishinNStuff 2 ай бұрын
Well invite me fishing Ryan 😂
@j.s.3297
@j.s.3297 Ай бұрын
The threaded rivet is good for mounting seats on bunk in aluminum boat
@KastkingAngler
@KastkingAngler 2 ай бұрын
OMG... my dad taught me to fish with that exact same Abu Garcia reel in the early 70s. Though I spent more time clearing backlashes than fishing. Dad forgot to tell me about the tension knob adjustment. :)
@FishinNStuff
@FishinNStuff 2 ай бұрын
Lol . I was given one in the 80s with no brake caps at all . I didn't know you could buy parts for those reels back then . After 2000 backlashes I learned to cast them . After that I could cast anything lol
@shaunmorris2722
@shaunmorris2722 2 ай бұрын
I gotta a list too. I'd go shopping too b4 I'd slap a fitting.
New Fishing Hacks
20:27
Fishin N Stuff
Рет қаралды 220 М.
Harbor Freight DIY Solar Generator
31:12
Fishin N Stuff
Рет қаралды 1,6 МЛН
Backstage 🤫 tutorial #elsarca #tiktok
00:13
Elsa Arca
Рет қаралды 39 МЛН
Each found a feeling.#Short #Officer Rabbit #angel
00:17
兔子警官
Рет қаралды 7 МЛН
7 NEW fishing Hacks
17:12
Fishin N Stuff
Рет қаралды 438 М.
Harbor Freight has great fishing gear
12:06
Fishin N Stuff
Рет қаралды 1 МЛН
5 Innovative New Fishing Products (Pure Awesomeness)
13:58
Fishin N Stuff
Рет қаралды 157 М.
TOP 10 GENIUS INVENTIONS THAT SHOULD EXIST EVERYWHERE
14:27
ideas corner
Рет қаралды 261 М.
5 New Fishing Hacks
18:21
Fishin N Stuff
Рет қаралды 269 М.
8 Fishing Hacks You'll use  (Very cool )
17:28
Fishin N Stuff
Рет қаралды 1,1 МЛН
5 very Cool Fishing HACKs
16:57
Fishin N Stuff
Рет қаралды 244 М.
Top 10 Tools the Pros buy at Harbor Freight!
16:05
The Den of Tools
Рет қаралды 665 М.
HANDYMAN TIPS AND TRICKS THAT REALLY WORK
19:20
TechZone
Рет қаралды 1,6 МЛН
Mbappe + Hakimi = Best Friends 😍
0:17
Fearron
Рет қаралды 11 МЛН
Goalkeepers vs Cristiano 😤🧠
0:17
Air Football
Рет қаралды 2 МЛН
Поплатился за крысиные выходки!
0:57
БЕЗУМНЫЙ СПОРТ
Рет қаралды 2 МЛН
His Celebration ☠️ #shorts #viral #funny #fypシ゚ #fyp
0:15
Conor McGregor MADE Dustin Poirier MAD and SHUT HIS LIGHTS OUT
0:59
MMA Clipmaster
Рет қаралды 1,7 МЛН
Қазақ жігіт соңына дейін күресті
0:23
ArmSportFaza
Рет қаралды 12 М.