Finally, the one device LPL has never used to open a lock: The key.
@64_Tesseract3 жыл бұрын
He is the lock _picking_ lawyer, not the lock _using_ lawyer
@nickryan34173 жыл бұрын
@@64_Tesseract Surely it's more the lock (ab)using lawyer... and in this example a key using lawyer?
@nickryan34173 жыл бұрын
@@AdventureKyles :)
@-nekaw39133 жыл бұрын
@@rjayy1 I didn't even checked it, but anyway im gonna say no
@ponnannakb3 жыл бұрын
😝
@buzzlightyear37153 жыл бұрын
"I just happen to have a key cutting machine in my garage."
@LittleCrowYT3 жыл бұрын
Lmao as weird as that is at a glance, I'm pretty sure he's said he does professional lock picking, so it's no weirder than a Blacksmith having a Forge or a carpenter having a jigsaw
@SiFiFreak3 жыл бұрын
I'm like "Of course he does"
@jasonw63313 жыл бұрын
I do, it's awesome. I make keys for my whole family.
@filipbitala26243 жыл бұрын
But just imagine watching video recording of a guy coming out of your house with your Tv and door lock
@extraclip3 жыл бұрын
That took me tf out.
@CaptainKapitan Жыл бұрын
Man I don't know what's scarier. Hearing him say 3 is binding or him creating a key right outside your door
@hardcodedsoftware4212 Жыл бұрын
You wouldn't hear it, all he has to do is record from that camera, and slowly insert it I to the lock. The video can be read and a key can be made away from the house
@MultiKrazyKoala Жыл бұрын
@@hardcodedsoftware4212 no I dont think you understand he has to do it right outside of your door
@jameswilkerson6040 Жыл бұрын
"Let me in or else!" "YEAH? Or else what?" *grinding sound* "...oh god no"
@Matrix867 Жыл бұрын
Like he said, he could just file down a blank right then and there. There's nothing that can stop him for long.
@peterwhitey4992 Жыл бұрын
Just don't use such outdated simple locks on your house.
@HeggyC2 жыл бұрын
A few years back I bought a second hand motorbike from a city a few hundred kays away. While driving back, the keys fell out of the ignition without me noticing. I called the local locksmith (in the town I'd stopped for gas) and he arrived with a small toolkit. He took out a flashlight and started to peer into the lock. He then produced a blank key and what looked like a pair of pliers. He then, from sight alone, proceeded to cut me a brand new key in under 10 minutes by hand. I believe it was this event that provoked my interest in non-destructive openings and lead me to become a subscriber of a lock-picking channel...
@Invertedworldx9 ай бұрын
You sir found a real locksmith and that could actually do motorcycles lol I'm in the industry so.. I can say there's less guys out there that know how to do what he did.. good job finding a real locksmith lol
@operez19908 ай бұрын
This is the locksmith you recommended to your friends. An artisan that is honest. Any lower skilled locksmith skips to the destruction of the lock and charges you for a new one with installation.
@jej34517 ай бұрын
*led
@nicknelson94506 ай бұрын
@@Invertedworldx fewer
@robertmccully27926 ай бұрын
I use to pick those with street cleaner brush metal left in street.
@sigibaes3 жыл бұрын
This is probably the slowest this man has ever opened a lock.
@CyIinder3 жыл бұрын
Time to open 10000000 locks with this method so it can save him time
@MrPicklesAndTea3 жыл бұрын
@@CyIinder Turns out LPL made a universal masterkey. He doesn't even need to pick locks anymore, he just whips out his key.
@watchandjewelryloft47133 жыл бұрын
Yeah, but no. This video was basically him cutting a key for a lock. Take the key making out and it's really no longer than any of his other videos. lol
@JamesPhillipsOfficial3 жыл бұрын
5 minutes to cut a key, that is admireable even for pick times
@geraldbal79453 жыл бұрын
@@JamesPhillipsOfficial the commitment is commendable
@squirrelsgarden3 жыл бұрын
"I just happen to have a key cutting machine in my garage." I'm starting to think this guy might not really be a lawyer 😂
@MikkoRantalainen3 жыл бұрын
Hey, everybody needs a hobby. If you're interested in locks, you might as well get key cutting machine or two.
@jasonbuckley41183 жыл бұрын
Hey, Everybody needs a hobby. if you're interesting in busting into peoples houses, you might as well cut key using a key cutting machine or two.
@beginswithaj3 жыл бұрын
Hey, everybody needs a hobby. If you're interested in busting into peoples houses, you might as well have a defence strategy planned to keep out of jail
@shinyrayquaza93 жыл бұрын
well he already needs a license to own a lockpicking kit
@terriecotham15673 жыл бұрын
Possibly he worked his way through law school in a lock Smith's shop
@andraslibal Жыл бұрын
Kwikset: we finally made a lock that LPL considers decently pick resistant LPL: let me show you how to make a KEY for it
@adtrlthegamer7449 Жыл бұрын
Kwikset: *Takes a sip of water before spitting and screaming out.* "OH COME ON!!?"
@thetechgenie7374 Жыл бұрын
@@adtrlthegamer7449 Pretty much, but then again how many thieves are going to use a specialized camera and then to cut a key and have the equipment laying around to do so? The decoder camera cost over $340 alone? Unless they are very professional and something very valuable behind the door, or gate which if it is then sure be way more secure then just a pad lock? Unless they not looking to steal but break into in for other reasons like to go after someone and don’t want to force entrance Plus locksmiths already use devices similar or decoder tools already.
@adtrlthegamer7449 Жыл бұрын
@@thetechgenie7374 Ok.
@LineOfThy11 ай бұрын
@@thetechgenie7374 the point is, there is literally no lock that is unpick able given minimal effort
@mintymus5 ай бұрын
Yeah, if someone uses a wifi camera on your door, then has one of these machines to cut a key...I have bad news for you. They're getting in your house no matter what...it doesn't matter what kind of lock you have.
@bikkies2 жыл бұрын
The part of this I found the most interesting was actually the key cutting machine. I've never seen one up close and overhead before. Some years ago I dabbled at making my own keys with a set of blanks, gauges and a hand nibbling tool. It was frustrating, laborious and, in my hands at least, I had a high error rate with incorrectly cut blanks outnumbering my successes. Your machine embarrasses my pitiful efforts.
@r_19012 жыл бұрын
Hand nibbling tool? I always use a set of needle files.
@jimmysparks315 Жыл бұрын
At least you tried... 10/10
@bikkies Жыл бұрын
@@jimmysparks315 I tried again since leaving the earlier comment and, using the Albert Lebel method with my Lishi nibbler tool - take smaller bites, be patient and be prepared to sacrifice lots of blanks as I practice - I had more success. It's still tricky to cut Yale and similar blanks (the formats usually found here in the UK) with that tool, but it can be done.
@jimmysparks315 Жыл бұрын
@@bikkies 20/10 !
@GeneticFreak11 ай бұрын
Most locksmith here have this and I witnessed this in action several times when I order duplicates for my keys
@sir_john_hammond2 жыл бұрын
He's a lawyer to keep himself out of prison. He's a lockpicker in case he doesn't.
@Adrian-dl9nb2 жыл бұрын
That's funny because you could argue the opposite in a very similar way.
@sir_john_hammond2 жыл бұрын
@@Adrian-dl9nb could, but it's more that his lawyering knowledge keeps him in the know on what's legal and what isn't, what loopholes exist and such. Once he's in prison, that knowledge doesn't help him very much anymore now does it? ;)
@TheNefastor2 жыл бұрын
You may want to hire his services next time you build a dinosaur park. I don't know, might keep the velociraptors away from the tourists.
@RaccoonHenry2 жыл бұрын
@@TheNefastor spare no expense!!
@myscreen2urs2 жыл бұрын
If he was locked up, he'd just pick his way out..... Unless they sealed him in the cell with packaging🙃
@RandomAmerican30003 жыл бұрын
I'm suddenly reminded of a scene from Police Squad: "Who are you? How did you get in here?" "I'm a locksmith, and... I'm a locksmith."
@dmeemd77873 жыл бұрын
😂🤣🤣
@kulturfreund66313 жыл бұрын
He was asked "Who are you?" - Not " What are you?". Thereforesound funny at first sight, but is bonkers at 2nd.
@DxBlack3 жыл бұрын
@@kulturfreund6631 ...he literally has what you said in his unedited comment.
@vids20023 жыл бұрын
@@kulturfreund6631 Umm, you might want to read again lol
@frollard3 жыл бұрын
@@DxBlack based on timing I believe it's possible for a comment to show as unedited as long as there are no replies to it yet - possible (although unlikely) kult had watched the video, loaded the old comment, and had it edited prior to him typing a response. In any case, that's all I have for you today. If you have any questions or comments about this comment, please reply below, and as always, have a nice day.
@7duke775 ай бұрын
The more I watch this channel the more I realize that locks are truly there to keep the honest people honest. Anyone intent on getting in can quickly do so in numerous ways, without having to break the door down or attempt to kick it in. Think I'll invest in some maglocks with hidden proximity sensors (or something along those lines) and leave the regular locks as dummies so nobody will even know about the maglocks.
@matthewmiller58224 ай бұрын
They’re also there to dissuade thieves who are looking for quick and easy entry.
@jamiem.9443Ай бұрын
yep fro all the shit masterlock gets 99% of theives will just cut it or Break around the lock. So yes masterlocks are crap. but also masterlocks are cheap and deter the vast majority.
@skepticbb932 жыл бұрын
Even as a watched video from his key-cam, I guessed every single depth incorrectly.
@alexritchie78692 жыл бұрын
Glad I wasent the only one lol .
@leolego22 жыл бұрын
same damn
@grdv103 жыл бұрын
This must be the most effort LPL has done to open a lock!
@Jomskylark3 жыл бұрын
Got tired of opening locks with thin pieces of metal and bubblegum so went the other way and put in a crap ton of effort to open it cleanly
@lairdcummings90923 жыл бұрын
Slower than picking, but a nifty solution for replacing a lost key without destroying the lock. Probably only economic for expensive locks, in a commercial application.
@benisted16143 жыл бұрын
@@lairdcummings9092 It's also worth noting that the Quikset Smart Key system is reykeyable without effort, if you have the current key all you need is a new key, so for taking possession of a premises this sort of action is perfect, no new locks needed.
@lairdcummings90923 жыл бұрын
@@benisted1614 so... Reproduce just one key, and you can then easily re-key the entire house? Nifty!
@Steamrick3 жыл бұрын
Nah, check out his video on the Bowley lock. He tried pretty damn hard to get into that one and failed so bad he didn't even show an attempt on camera.
@kuuke82833 жыл бұрын
He made an entirely new key in under 3 minutes to unlock that lock. What a legend
@Pycran3 жыл бұрын
The fact that he manually made it using a paper with lines for measuring the cuts is impressive, he must be very proud.
@kuuke82833 жыл бұрын
@@Pycran oh 100%
@shaneshannon68743 жыл бұрын
I'm sure he had some practice in with this lock and cutting the key, (knowing what cuts to make before the video) but regardless it's still impressive!! Practice with this one single lock would just make it so you could do it with any of these locks in that amount of time....
@geraldfrost47103 жыл бұрын
Cops are still going to use bolt cutters and a battering ram. "Non-destructive entry"? Where's the fun in that!
@bepowerification3 жыл бұрын
@@geraldfrost4710 its a great way to get into an object to place a bug without anyone noticing.
@justincase52282 жыл бұрын
As an expert in 3D printing and CNC technology I'm surprised that you folks haven't caught up. For the fun of it, I 3D printed a working key for one of my locks. If you have the numbers for a particular lock it should be possible to "add" a blank key object file with each of the correct cylinder offset object files then slice/print the resulting toolpath file. You could either print it on a metal (or even plastic) 3D printer or mill it using a CNC machine from metal, for example.
@IndependantRobloxia2 жыл бұрын
This has been a huge help to me as a locksmith, no longer do I need to drill every smartkey I come upon.
@runed0s865 ай бұрын
Remember, never tell your customers that a broken window is cheaper than a locksmith.
@Dalenthas3 жыл бұрын
I feel like LPL is just showing off his toys in this episode.
@kvozart84373 жыл бұрын
Do you suggest that LPL is Joker?
@throttlebottle59063 жыл бұрын
I watched again looking for toys, but only seen tools of the trade ;)
@TravisFabel3 жыл бұрын
@@kvozart8437 or a smoker?
@NRC0733 жыл бұрын
Sponsored by us viewers of course,
@tofadeisastart3 жыл бұрын
This video must have been filmed awhile ago. This tool is old
@ramazan200023 жыл бұрын
This man went from lockpicking to literally making the key lmao
@abraxaskabrakas60983 жыл бұрын
I see a man of a bad game with culture
@abraxaskabrakas60983 жыл бұрын
And so do you
@mariokarter133 жыл бұрын
A key that opens many locks is a master key. A lock that opens with many keys is a Masterlock.
@EpicVideoGamer77713 жыл бұрын
@@mariokarter13 lol nice one XD
@mihan2d3 жыл бұрын
And the "Lawyer" part is here just for show at this point...
@DissociatedWomenIncorporated2 жыл бұрын
That key cutter has a sound that’s somewhere between creepy and relaxing.
@andresaofelipe3 жыл бұрын
Dude is now at the point where he doesn't even pick the lock anymore, he just makes a new key
@matejlieskovsky96253 жыл бұрын
...and somehow that is the *slow* way to open locks for him.
@Kittsuera3 жыл бұрын
@@matejlieskovsky9625 but, its better in the long run if the lock needs to be repeatedly used and someone else needs to be the one getting in and out.
@frik763 жыл бұрын
And so he became a master of keys in the matrix
@Sparkette3 жыл бұрын
He gave that lock the PS3 treatment.
@ericjardine82103 жыл бұрын
I literally laughed out loud
@JosefHeller973 жыл бұрын
I love that he cuts the key and then uses it to open the lock all in one continuous shot. Like no matter how skilled he shows us he is, he still wants to make sure no one can claim he's doing camera tricks.
@jimturpin3 жыл бұрын
Josef, totally agree, I was going to say the same thing. The man knows his stuff!
@rudranroy21093 жыл бұрын
He's a lawyer. So...
@tonyd.44303 жыл бұрын
If you’ve seen his over 100 videos on lock picking & the difficulty of some of those locks, then there’s no doubt. He don’t need the key making m/c to open this simple lock.
@khathabhamed70173 жыл бұрын
Tony D. Over 1000
@RNCHFND3 жыл бұрын
I'm 100% sure that he does a run test for all his videos or maybe two takes if something goes wrong
@georged92342 жыл бұрын
A man and his toys. When I started my career, was single with a nice paycheck I learned the mantra “he who dies with the most toys wins”. I love this channel and your dedication to your hobby!
@JesseCase2 жыл бұрын
The camera was the most amazing part to me. I didn't know that we had cameras that were that small!!
@bloosheep2 жыл бұрын
I'm not sure the camera was in the key. I suspect there's a fiber optic system in the key and the camera is in the bulky black handle.
@u563rick6 Жыл бұрын
Surgery
@LordCrion3 жыл бұрын
Small brain: break the lock Big brain: pick the lock Galaxy brain: manufacture a new key
@amanwithhiscigaretteandcof34743 жыл бұрын
..LoL..
@MinecraftRedOFFICAL3 жыл бұрын
LMFAO
@jenniferabner86083 жыл бұрын
Under rated comment
@chuskepon1733 жыл бұрын
micro brain: break the door
@NoeticSystem3 жыл бұрын
Universe brain: manufacture a new lock
@MightyBiffer3 жыл бұрын
Driving to college in the 80s I locked my keys in the car. I called a locksmith to get me in. After he was done I showed him how my keys were on the dash board. He said if I let him try something he would cut my bill in half. We proceeded to look at the keys trough the window and used a handheld key cutter and made a key. It didn't work on the first cut so he eyeballed it again and made one modification and it worked.
@andhieyusuf70083 жыл бұрын
Damn, that's so nice of him.
@donkremer60193 жыл бұрын
I expected a prank where he smashed the windshield and handed you your keys.
@red29653 жыл бұрын
@@donkremer6019 🤣🤣
@delinep72863 жыл бұрын
Nice, a show of skill AND half price.
@killerdinamo083 жыл бұрын
He was his father since he charged you less for more work, plus an extra key 😂.
@Cyge240sx Жыл бұрын
I always looked a lock pickers as like magicians, but 1:41 of just watching you do this you have made years of fog make absolute sense
@presidentkiller2 жыл бұрын
LPL: "Hello, this is the Lock-Picking..." Somebody in the background: *clears throat* LPL: "This is the Key-Making Lawyer, and today a court ordered me to show you how to legally open a door..."
@Omikoshi783 жыл бұрын
LPL: “I happen to have a machine for cutting keys in my garage” Everyone: of course you do 😅
@dogishappy03 жыл бұрын
My thought exactly
@kelly41873 жыл бұрын
These are kind of required for a professional locksmith. When I can get a garage built I can then start stocking up for running my own business, and I've one eyed up.
@chriswaldrip27393 жыл бұрын
Literally what I said... out loud.
@chriswaldrip27393 жыл бұрын
Anyone else surprised that Bosnian Bill didn’t help make it?
@estudiordl3 жыл бұрын
@@chriswaldrip2739 coming soon... 😏
@TowerHyena3 жыл бұрын
LPL so dedicated to trimming fluff he's showing actual like movie spy tech AND cutting a new key in about 5 minutes total
@jaystarr65713 жыл бұрын
But he forgot to blow on it...they always blow on it in the movies.
@emergencyroomandy94253 жыл бұрын
Weaker men would have made this video 20 min long
@Estinus3 жыл бұрын
Love it
@PXCharon3 жыл бұрын
The name's Wright. Phoenix Wright.
@Fish-bt4cj3 жыл бұрын
Thousandth like
@dos_mas_8052 жыл бұрын
Just discovered your channel and my mind is blown! Here I am thinking of an episode of the A-Team when the crew had to take an impression of a key in order to replicate it and it worked, that blew my mind as a 9-year old kid and that memory still sticks with me today lol! Love your channel and you have a new fan!
@southfloridaoutdoors10912 жыл бұрын
"It's not breaking and entering, I had a key" -LPL after getting caught in the defendants apartment
@Life28SK3 жыл бұрын
Me: Nothing ever surprises me on this channel. LPL: Let me open a padlock with a key
@-M0LE3 жыл бұрын
I’m still learning
@awhahoo3 жыл бұрын
My god gordon! What are you doing here? You are late!
@zacheurittz98653 жыл бұрын
@@awhahoo They're waiting for you in the test chamber, Gordon.
@PanduPoluan3 жыл бұрын
Why does this comment make me laugh 😂
@GurkenbauerTim3 жыл бұрын
@@PanduPoluan cause it’s ironic. A lock picking channel opening a lock with a key
@andrewhooper56453 жыл бұрын
“Who are you, and how did you get in here?” “ I’m a locksmith, and I’m a locksmith.”
@meep.4723 жыл бұрын
w h e e z e
@markandrus88793 жыл бұрын
Nice Police Squad reference, well done
@Samoasoa3 жыл бұрын
I am a locksmith's locksmith.
@idkidk50173 жыл бұрын
why did you cheat on me? he's a locksmith and he's a lockpicker oh
@garr_inc3 жыл бұрын
- State your name, rank and intentions! - The Doctor, doctor, fun.
@justinbanks23802 жыл бұрын
"I find it easier to just slide it in" -Lock Picking Lawyer 2020
@repairfreak2 жыл бұрын
Cool gadgets, I remember when a young teen about 40 years ago and my parents would occasionally take away my car key. Being a defiant kid and handy with tools, I then drew around the actual key on a sheet of aluminum and marked the grooves. I rough cut then hand filed a key cutting key slots with my Dremel tool and a guide, after a bit more filing the key worked perfectly! I just wanted to see if I could do it and I did, lol. 😎👍
@davidhoekje78422 жыл бұрын
Hell my first car, a 48 chevrolet, the key would turn with a dime. The tolerances weren't very tight on those.
@ofp8574 Жыл бұрын
My first car, a 61 Buick Special, the ignition switch would turn without a key. It had a lock position, but I never used it. I also would always lock the door by reaching through the vent window and pushing the handle forward.
@nv14933 жыл бұрын
" I just happen to have a key machine in my garage" Why am I not surprised?
@TheNameTag3 жыл бұрын
I'm pretty damn sure he is or was a lock smith.
@PanduPoluan3 жыл бұрын
@@TheNameTag He was a lawyer...
@TheNameTag3 жыл бұрын
@@PanduPoluan welp color me surprised he's actually a lawyer. Welp that doesn't mean he isn't currently a locksmith. Well he technically is just not a professional. But I was talking professional not as a hobby.
@bhume75353 жыл бұрын
@@TheNameTag He is a professional. He does make money off his hobby. You just watched it.
@fakename2873 жыл бұрын
@@bhume7535 I've never seen an ad on any of his videos so as far as I know he doesn't make any money of off youtube
@MrJeepinZeke3 жыл бұрын
“I just so happen to have a device that makes keys” Sir, you are the key.
@Dwayne_Bearup3 жыл бұрын
If they ever make another Matrix movie, LPL will play the Key Maker...but it will only show his hands.
@lovecheese453 жыл бұрын
@@Dwayne_Bearup Keymaster from Ghostbuster.
@Smugg3 жыл бұрын
Yeah, and he’s a self-made man. Where do you think he made himself?
@besmartIbrahimsultan293 жыл бұрын
kzfaq.info/love/jWpq0YajYbpMFQQKuGkMbA
@BandolierBooty2 жыл бұрын
Buddy finaly taught us how to measure and cut our own keys, atleast a year tip toeing around with lock picking
@Grumpollion2 жыл бұрын
It strange... no locksmith I have ever been to has been able to cut a key perfectly the first time. It often takes them over an hour of re-adjustment to produce a key that works.
@aztoc16072 жыл бұрын
Then again your locksmith probably can't pick a lock with a soda can, a coat hanger or an orange juice bottle. Not in the same league as our boy.
@jordynorm82122 жыл бұрын
Our local locksmith/DIY shop man cuts keys perfect first time every time. Takes him about 5 minutes per key!
@hassananwar98332 жыл бұрын
@@jordynorm8212 I think you know the lawyer
@jordynorm82122 жыл бұрын
@@hassananwar9833 If only I were so lucky!
@philipbohi9833 жыл бұрын
It’s like a colonoscopy for a lock.
@357Magzz3 жыл бұрын
This comment is so underrated! =)
@RoyBruce0073 жыл бұрын
would of been nice if it worked in under 10 seconds 👍👍
@vell0cet5173 жыл бұрын
Waiting for the lock picking proctologist channel...
@1STGeneral3 жыл бұрын
That's why I felt uncomfortable watching this video I don't use padlocks my buildings are lag bolted shut over the last dozen years I've found a couple lag bolts partially unscrewed thieves are lazy and a dozen 4 inch lag bolts takes some time to unscrew unless you use a cordless drill I rarely open these buildings except during growing season
@mrvabbe23 жыл бұрын
A colockscopy
@E_Rico3 жыл бұрын
This guy reviewed a camera, made his own key and opened a lock in 5 minutes
@HuatengChen3 жыл бұрын
Most 'renown reviewers' of anything, don't even go past the "Hi", "the sponsor..." and "unboxing" in this time.
@Kidneytrader3 жыл бұрын
@@HuatengChen And don't forget to smash the like button and ring the bell!1!
@zhou_sei3 жыл бұрын
that is indeed how it went down.
@christophermorin90363 жыл бұрын
With Editing.
@aadilkp53353 жыл бұрын
thats like 3 20 min videos for other youtubers
@gameclips57342 жыл бұрын
I never realised how simple key cutting machines were to use
@johnd53982 жыл бұрын
The machine he used is very different from a standard key cutting machine. That one is made to cut a key without an original. Most key cutting machines are even simpler to use. I'm sure there are videos showing how to use standard key cutters.
@TheStormyClouds2 жыл бұрын
The key cutting machine part was honestly so cool.
@SLJB85 ай бұрын
My good friend here in Salt Lake City is the original designer of the tool. I'm the proud owner of the prototype he gifted me. BosnianBill gives accolades to the very same good friend as being one of the best lockpickers in the world. Shout out Chessguy125 on your design.
@zacanderson75393 жыл бұрын
Imagine SWAT stacked up outside of your door when you hear the key grinder fire up
@4Thug2Life03 жыл бұрын
Um no they just bust it down with the battery ram.
@Lunaphire3 жыл бұрын
@@4Thug2Life0 Lmao, battery ram...
@picax83983 жыл бұрын
@@4Thug2Life0 whooosh
@Someone-ll1rc3 жыл бұрын
“I’m gonna load a Kw1 blank.”
@iWork3d3 жыл бұрын
@@Someone-ll1rc im crying
@fireaza3 жыл бұрын
I'm impressed at how in intuitive that key-cutting machine is to use. Just from watching you use it without explanation, I think I'd be able to successfully cut a key too!
@Ratzfourtyfour3 жыл бұрын
I love the analog gauges, works darn well.
@Sonofavenger3 жыл бұрын
@@Ratzfourtyfour Same. I generally prefer analog over digital any day of the week. At least, for a lot of things.
@xenocide13073 жыл бұрын
It looked very satisfying to use.
@bdkj3e3 жыл бұрын
I wanted one immediately, I already have a standard key cutting machine but man that looks nice.
@r0bw00d3 жыл бұрын
I tend to disagree. I was waiting for him to cut the fifth slot but he never did, so that's my intuition right out the window.
@miketyler25132 жыл бұрын
When I was working for an Oldsmobile dealership , The parts department had a hand operated key cutter that a depth gauge that could be set for whatever pin was being cut . With a squeeze of the handles a new key could be made using some code that was in a manufacturers manual. AND ....it was cordless!
@Polar_Ted2 жыл бұрын
The counter guy at our GM dealership had the cut depth numbers memorized. He'd cut you a fresh key just by looking at your key for a second.
@IdRatherBeHiking2 жыл бұрын
You have a very calm, thorough way of speaking in your videos, it's nice then again communication is key.
@Jasta3153 жыл бұрын
That was faster than the hardware store can copy a key for me 😂
@davelewthwaite3 жыл бұрын
That was faster than I can *find* my keys...
@anon874813 жыл бұрын
That's faster than I can remember I lost my keys
@marvindebot32643 жыл бұрын
And this isn't a copy, it's a perfect new key. Copies degrade with every generation of copy but this is a key origination machine that is usually used when repining a lock
@psycedelic3 жыл бұрын
But he didnt copy any key..
@shahimshahzad81363 жыл бұрын
😀😃😄😅😅😂🤣💩🙋
@nickgawne3 жыл бұрын
It would appear that LPL has been banished to the Garage after yesterdays video. Well played!
@xerinety3 жыл бұрын
💀💀💀💀💀
@stacywalpole68263 жыл бұрын
LOL I had to go look at yesterday's video. OH MY! 😅🤣😂🤣😅
@ScottKenny19783 жыл бұрын
😂😆😂😆😂😆
@DoubleBFPV Жыл бұрын
That is so pretty fine art you’ve got going on there! Nice work! Thanks for sharing!
@Mike-ju1vl2 жыл бұрын
Who would have thought a channel about picking locks would be so fascinating?
@AdamLaRosa3 жыл бұрын
The way he immediately uses his freshly cut key to unlock the padlock literally without saying anything actually made me laugh. Oozing confidence he is!
@PreservationEnthusiast3 жыл бұрын
If it didn't work the first time, he could retry the key and edit the video. That's the cut you will never see.
@AdamLaRosa3 жыл бұрын
@@PreservationEnthusiast perhaps, but let's just revel in the theatre and mystery of it all shall we :)
@PreservationEnthusiast3 жыл бұрын
@@AdamLaRosa I prefer to deconstruct videos on You Tube. So many channels are completely fake. Actually LPL is one of the genuine channels with real content, so you may even get to see that first cut of the key not working here (that's if it ever happened). But there are many people putting out stuff pretending it is real and what is more the retarded portion of their viewers believe it is real! It is my job to help expose and educate these people. So rather than "revelling in mysteries" , I expose the fakers. It's just a different approach. I'm not saying your approach is wrong, but life would be boring if we all did and acted the same!
@KRYMauL3 жыл бұрын
@@PreservationEnthusiast A lot of channels will also make videos that are modeled after TV and pretend like they got it perfect on the first try. Take FaZe for instance, trickshots take many tries when the enemy is just standing still and for the most part the other players are likely trying to out gun the FaZe boys.
@hiigara20853 жыл бұрын
Same. My reaction was just a hearty chuckle. The way he shoots the videos are fantastic
@jrdeckard33173 жыл бұрын
"We have little spacers that help you find the correct depth for each of the sliders. We won't be needing those."
@curtwhite8763 жыл бұрын
This is mission impossible level lock picking...
@lukes22193 жыл бұрын
Not saying I could do it but it looks like something anyone somewhat familiar with the lock could do
@niccis19823 жыл бұрын
You could take a panorama picture / video and then you have the lock as a whole picture
@Tmanaz4803 жыл бұрын
The spacers might come in handy if you don't want to have your phone out.
@myownsite3 жыл бұрын
@@niccis1982 They don't work so well. "So we have a very narrow 1, a really fat 4, ..."
@ConsultingjoeOnline2 жыл бұрын
Wow, you are the gold standard of picking locks. Great videos!
@endgovernmentextremism2 жыл бұрын
That key cutter is so simple... I love it. CNC guy here.
@tommyd57583 жыл бұрын
This channel just keeps on getting better and better.
@Laevatei1nn3 жыл бұрын
Its always at it best
@patrikwestin3 жыл бұрын
Agree
@kLR_iNsTiNcT_3 жыл бұрын
The best, this man is a magician, when it comes to locks and keys.
@NT4XT3 жыл бұрын
Yes! LPL wastes no time, and such videos can't possibly be done better. LPL for Commander In Chief of the United States!
@ronspi3 жыл бұрын
This is usually what happens when there's the quality to watch, learn, listen to, and understand.
@t3hjnz3 жыл бұрын
That lock popping open with the freshly-made key is one of the most satisfying things I've ever seen on this channel - thanks for sharing that process.
@maoman48553 жыл бұрын
I've been a locksmith for over ten years and it's still just as satisfying as ever.
@SandGoesEverywhere2 жыл бұрын
As a locksmith I prefer to drill the core of smartkey lock, it takes less than a minute. ( Smartkey core are really cheap, so I leave the deadbolt and only replace the core that I drilled) than if client had many copies of their Keys in circulation, I take their existing keys and rekey the lock in 30 seconds since its smartkey. At the end its faster and less expensive for the customer since we charge Time. It usually takes about 15 minutes to complete these calls Also where I live it can be -30° so client and I really wants to be done as quickly as possible
@masonwoodman59062 жыл бұрын
the wifi camera is such a great invention as far as cutting keys goes. this could help make jobs so much easier.
@ICKY4273 жыл бұрын
"i cant open this lock, what should we do?" "just....look inside to see what the combo is..."
@AsianFlew3 жыл бұрын
Lock company: "This lock is so secure it can only be cut with a lightsaber." LPL: "Wait a second, let me check my garage..."
@Euclase3 жыл бұрын
"I just so happened to have a new lightsaber in my garage" Lock company: *nervous sweating *
@hawktitan78963 жыл бұрын
I mean, those exist now. Kinda. kzfaq.info/get/bejne/rqlmfZeFxM65e5s.html&ab_channel=HacksmithIndustries
@jamesbondoo813 жыл бұрын
LPL: Hold my beer
@XenosInfinity3 жыл бұрын
@@hawktitan7896 Good to see someone else got in with the Hacksmith link, I half expected I'd have to do it myself.
@jdeaco60363 жыл бұрын
Infinity war is the most ambitious crossover, hacksmith and LPL: hold our beers
@Imneverserious Жыл бұрын
Ahh the sound of the key cutter brings back so many memories of the lock and key store I worked at in my high school and college days
@michaelscott466Ай бұрын
I've invented a electric key pick with quick changing heads for various lock brands/types. It works through oscillation and can open almost any lock within a second using a similar principle to a bump key.
@saldan39853 жыл бұрын
Pick the lock : ❌ Creates a duplicate key after scanning the lock : ✔
@GvinahGui3 жыл бұрын
* insert drake's meme here *
@omfgmouse3 жыл бұрын
This is the lockscanning lawyer...
@nyxnox21353 жыл бұрын
Am I the only one who wants to see an educational video on the Keyfile machine? Looks pretty interesting
@robertkribs95133 жыл бұрын
You did get to see just about everything it does though. Set the position and cut the depth. He was a little artsy going left and right of center by a millimeter or so on each position so I'd like to hear him talk through it, too.
@lairdcummings90923 жыл бұрын
Seems pretty intuitive; a cutting burr, a burnishing wheel, and a pair of feed screws associated with an exchangeable template card. A bit more advanced than the old key cutting machines I used as a kid, but recognizable.
@Zanpaa3 жыл бұрын
It looks really simple, I expected something much more complex actually. It seems that the right knob controls the side to side movement, which is shown by the bottom needle (and the blue card gives a scale to let you know in front of which position you're at). The bottom knob controls the "depth" of the cut, shown by the top needle. If you want to do a 4 cut in position 3, put the bottom needle to 3, then the top needle to 4, and then move the key side to side a bit (shown by the smaller lines on the bottom scale) to make the cut wide enough.
@GarrettComics3 жыл бұрын
Absolutely!
@Zanpaa3 жыл бұрын
@@robertkribs9513 you can see the left and right of each position marked on the scale. You probably have to make the cuts wide enough, or the key would bind a lot.
@nottjohn94182 жыл бұрын
Years ago I lost my motorcycle key and I called a locksmith who looked down the keyway with the sort of thing that doctors look in your ears with and had me a replacement key in less than five minutes. For the average man in the street to see that done blew my mind.
@johnd53982 жыл бұрын
There are a LOT of comments from people saying they've never seen a key cutting machine work. This is NOT a standard key-copying machine. It is used for making keys with an original to copy from and is more technical than a standard key copying machine.
@littlepomacanthid3 жыл бұрын
LPL: turns on key cutting machine KZfaq subtitles: [applause] [music]
@samiam6193 жыл бұрын
I am AMAZED at how bad the voice to text function is!
@nikoligogle31533 жыл бұрын
😂😂😂😂😂
@alex05893 жыл бұрын
A real banger
@midimusicforever3 жыл бұрын
This is the Locksmithing Lawyer, and what I have to today is the making of a key.
@kiradotee3 жыл бұрын
The making of the key made my day.
@Mach1Greeble3 жыл бұрын
Hi, this is the law talking locksmith guy
@lairdcummings90923 жыл бұрын
The Lawsmithing Lock Lawyer wants to know your location.
@rebmcr3 жыл бұрын
Locksmithing is just Lv.2 Lockpicking.
@runed0s865 ай бұрын
Neighbor has one of these and i had to completely dissasemble it after failing to pick it for a few minutes in order to manually rekey it. It was pretty easy to do, and I'd highly recommend using these on your house, airb&b, and rental!
@giusepperesponte80772 жыл бұрын
This is now one of my favorite LPL videos. I don’t know why but it’s just extremely satisfying and such a smart method of beating the lock. My absolute favorite videos from LPL are his destructive entry videos, especially the Ramset ones, but this is my favorite non destructive video.
@seabee56293 жыл бұрын
Kwikset: “If we can’t beat him, we may as well join him”.
@lushpush50043 жыл бұрын
This is the guy that gets a call to be recruited in a heist team, while he's on a heist mission trying to lock pick a bank vault.
@mikeincognito3 жыл бұрын
I think there is a wrong word there...he wouldn't be just "trying".
@mateuszzimon82163 жыл бұрын
U think where he gets money for law study
@isaiah37353 жыл бұрын
He has actually stopped being a lawyer, because he is now a security consultant/lockpicker full time
@iliaadamanthark83363 жыл бұрын
That explains why he doesn't bother to make the video 10min long
@thegreywolfe123 жыл бұрын
Someone get me a LPL payday dlc
@scottmcmaster4927 Жыл бұрын
That this lawyer is so adept at non-destructively breaking and entering is giving me strong Better Call Saul vibes.
@ironboy324510 күн бұрын
this seems like a really useful tool for a locksmith, which can be used instead of drilling a lock
@m0n3m6553 жыл бұрын
Interesting. Interesting. The moment he unlocks the lock with his new key: ridiculous smile. Nice one. Again.
@nightlord5313 жыл бұрын
"I could pick this open, but that takes too short a time"
@htcmlcrip3 жыл бұрын
Exactly my thoughts lol
@xanhfei3 жыл бұрын
Well, you cant monetize a 10 sec long video on youtube.
@htcmlcrip3 жыл бұрын
@@xanhfei good point
@xanhfei3 жыл бұрын
@Will Wallace what if you add another one after video so you can put another ad and double the profit. Sometimes my genius is almost freightening.
@ussessexcv-91893 жыл бұрын
This gives you a key so you can just come back and use the lock as you see fit.
@joshchavers73912 жыл бұрын
The lock picking Lawer at birth. "I only had to apply some pressure from the inside and this lock opened right up." lol
@MrLGDUK2 жыл бұрын
Brute force isn't always the answer. Sometimes you've gotta use your head 🙃
@jamesederer3565 Жыл бұрын
That is a very nice machine. I'm sure the hours that it took to pay for it were worth it. I've always enjoyed your videos, but this one really stands out to me for some reason. Excellent job!
@FreeRadical093 жыл бұрын
This was LPL taking the panoramic route to open the lock while being lazy on a Saturday morning.
@KraktysAncientAccount3 жыл бұрын
"I find a little bit easier to just slide it in" -LPL
@JoeyLovesTrains3 жыл бұрын
I was gonna say, that’s what she said.
@JosDehaes3 жыл бұрын
A line for a April 1 episode
@SommerSen3 жыл бұрын
no preparations?
@therocketman3213 жыл бұрын
No lubricant needed 🤣
@JGunit3 жыл бұрын
Said all moms...
@cloudstrife6435 Жыл бұрын
He not only hacked the lock, but the key too. No one is safe!
@madjesterlabs9369Ай бұрын
Oh man, the sound of that HPC cutter brought back memories from my key shop days.
@crankypipo3 жыл бұрын
I like how when hes cutting the key the subtitles translates to: [Music] [Applause]
@jameskung98082 жыл бұрын
Rewatched the video with the CC turned on. Not disappointed
@lankymaccrazyhair264 Жыл бұрын
I mean it is less grating than some actual music
@drscience39463 жыл бұрын
"pfft, I bet LPL can't pick my lock" okay I'll just make a key then "wh...what?"
@JyeKelly3 жыл бұрын
Can't wait till he gets stuff made here's lock
@Xfade813 жыл бұрын
@@JyeKelly what ? Edit: nvm the comment further on this page made it more clear what was meant.
@besmartIbrahimsultan293 жыл бұрын
👍👌👏kzfaq.info/love/jWpq0YajYbpMFQQKuGkMbA
@drscience39463 жыл бұрын
@@JyeKelly me either, the greatest crossover since infinity war
@Plant_Parenthood2 жыл бұрын
wild that these things are so expensive! The majority of the unit is made from the same parts as those $30 wifi microscope cameras you can get from Amazon.
@derekplus2 жыл бұрын
Awesome, I've been looking at this tool for a bit, I can see how this would save a lot of time. And you can charge the customer for the code to the lock!
@stevemcknelly50363 жыл бұрын
The gold standard lock picker owning the gold standard key cutter in his garage equals a legend.
@zachwolf51223 жыл бұрын
I’m just impressed someone can remember 5 numbers that long
@JoepHeki3 жыл бұрын
person man camera woman tv
@cybermaus3 жыл бұрын
Another genius. How many of you are there. This one even can recite in randomised order.
@guiserixsacha45203 жыл бұрын
in fact the human brain is main to hold about 4 information at the same time max, numbers when defined as indiviual information are hard to remenber because you can't manage more than 4 at once but if somhow you get them to be one single information it becomes really easy. for exemple : 5184 is hard to remember, but things like "2077" or "1945" "2020" have the same amount of numbers yet it's easier to remember since it realates to a single information : a year. also a simple trick to help you get up to 5 information at once is to consider the fifth one as an "intruder" like the one which is different from the rest. fin a similarity among the 4 information you remember and then th fifth one is the one which doesn't have this similarity. also it helps when you are counting number, on a dice fo exemple, the hardest face to identifie quickly is th 5 since you're brain can't recognise it and count it immediatly. the 6 is easy since you can see 2 ligne of 3 and admitedly the 5 having such a particular shape is easy enought but anyway and easy way to identifie the noumber of element when they are 5 is to identifie a first pack od 4 and then you see that there's only one left, so 5. brain is stupid and can't manage past 4 but brain is so stupid you can trick it in doing things that it can't normaly do.
@Domura3 жыл бұрын
@@guiserixsacha4520 lmao no
@SkylarsTerribleMemes3 жыл бұрын
... none of y'all have memorized things like your phone number or license plate?
@el_loco77982 жыл бұрын
Opening that lock was pure class, respect.
@kurtiscarr71882 жыл бұрын
Fantastic as always, still very timed about taking the blunge and doing a locksmith course
@noway28313 жыл бұрын
I feel like the creator's three-year-old son asked him "why don't we just make a key with a camera and-" and his dad just yells "genius"
@HemanthRajGplus2 жыл бұрын
I imagined David Wallace and his kid (from The Office) saying this!
@kargaroc386 Жыл бұрын
If it works and its stupid, its not stupid
@geek2.0273 жыл бұрын
I looked at the title and I was thinking: WHY would a camera company also own kwikset? Thanks for all the likes! :D
@iododendron34163 жыл бұрын
No, it's the camera that owns kwikset!
@blueberries89853 жыл бұрын
No no, the Wifi Owns Kiwkset Tiny Camera, you guys dont get it
@ManishKumarIITG3 жыл бұрын
to lock the camera
@b-h-t3 жыл бұрын
Clearly the wifi camera is operated with a kwikset smart key.
@MasterYoshidino3 жыл бұрын
Yeah... swap "owns" with "pwns" and it would make sense.
@MarkRoemer20222 жыл бұрын
There isn't an episode I haven't enjoyed. Please continue to make this great content!
@TorQueMoDАй бұрын
Was neat to see how cutting a key works. I've always been curious about that.
@tom23rd3 жыл бұрын
I imagine at this point, LPL doesn't even have to walk, he just sorta levitates from lock to lock, transcendentally enlightening them
@jrootabega3 жыл бұрын
He floats like Yogi Bear on the stink lines coming out of a picnic basket
@noahway133 жыл бұрын
What a fanboy
@lonewretch3 жыл бұрын
@@noahway13 man cranky people are sad.
@immortalsofar53143 жыл бұрын
I'm surprised the locks don't just immediately open out of embarrassment.
@yulianloaiza2 жыл бұрын
Hahahahhahaha
@pogzie3 жыл бұрын
2021: "This is the keymaking lawyer"
@lagg1e3 жыл бұрын
LPL, home security consultant.
@galaxiedance3135Ай бұрын
This guy at my work, he'd forget his key many times for his tool box. I took his key, and a piece of metal, used Die Blueing on the metal, used my scriber to copy the shape of his key. Ground it down close with a bench grinder and then the rest with my tiny file. The lock worked... actually it felt much better than the original at opening his box. We left the spare in my box so it's there all the time incase he forgets. I know that I can do this stuff all by hand. I am use to filing things to within 0.001" usually just by eye, cuz I'm a Tool & Die Maker, we've got to be able to do that or others will think we suck at filing.
@TheZarutox2 жыл бұрын
The lock you cant pick either open is Iloq. And thats because it works not only mechanically but also has internal code which has to match with the lock base key to open.