Joseph Jobo Licayan Unlimited power!

Joseph Jobo Licayan nailed it! Good job!

Indeed,celestial's founder is smart even someone stole data of GN drive rhey cant find the right core for generate GN drive constantly. Even if the enemy make equal performance machine to compete with the gundam,they cant keep up with gundam's ability to regenerate energy for long time

1000000/10 !!!!!!!!!

GN particles are green, not blue. Also, the difference between the psuedo GN Drives isn't just the color, but the TD blanket, and energy output. On the quantum level, spin affects the energy, and color. So while not being a true GN drive, they are producing particles, just at a different energy level, and without the TD blanket they do not produce enough to sustain the reaction, thus needing the generator to supply electricity to jump-start the reaction, and to sustain it for prolonged use. The reason behind the time needed to produce a GN drive isn't because they kept the 00, it's the process in making them. Jupiter takes an extremely long time to get to, even in the 00 universe. That alone took up the majority of the time, on top of making 2 drives in perfect sync.

Ecksphyre I know what you mean haha especially compared to other gundams which the Gundam 00's gundams make others look bulky like for example Wing.

Andrian Saputra do you think the seven sword can be combined with this xn raiser?

Thiago Monteiro I'm really tempted to get that kit after building this!

GN-0000 + GN-0010 R Full Armor. All weapons and accessories

You should do it you won't regret I did it to my 00 and it looks a beast

It actually does exist in metal build form. Basically XN raiser+ Seven swords in one pack

Great to hear! Thanks!

Battery=condenser

nice!

Yes, but I don't know how often Bandai is going to re-run it. So it will still be limited in availability.

It's just that in the manual they are called condensers I think? So that's why I got confused

Make it even more overkill by putting the seven sword/g on it

If you like the XN parts then get that one

Hey man. The other 2 leds go on the binders on the O Raiser.

@@DarkROSkull013 thanks man 🤘

Based on what I saw in the video, this is a complete MG 00 Raiser kit with everything that was in the original box- stickers, dry transfers, LED unit, effect parts, etc - plus the XN Raiser parts and the decals for that. And it doesn't look like any parts on the actual Gundam were replaced. It's not like the 7 Swords/G where parts of the original kit (like the original GN Sword II blades, the GN Shield halves and the effect parts, and the white knee caps) were omitted from the runners and the sticker/dry transfer sheets completely replaced.

nice! thanks for replying guys! I was iffy on getting it (cause I would rather have regular 00 Raiser) now that I know it has all the original parts and everything, I'm definitely going to buy it. thanks again! :)

Joeie Rivera I wanna get a 7 Swords now after building this!

I agree! I also have a 00 Raiser so I'm kinda wishing Bandai would release a separate XN pack in the future.

P bandai 😀

Dino Kwong I don't care that much, P-Bandai MG weapon packs/backpacks are available at a store I go to.

If bandai maybe they will not xn standalone.. But i guess there will be other model make it standalone...maybe daban or dm i guess

Unfortunately I highly doubt they will at this point. Would have been nice if they made that from the start

Many many multiple ways!

Good to know! I'll just be displaying it standing anyway, but thanks for letting me know! May need that in the future!

I will eventually, but not soon.

I don't get kits directly from them, they supply the funds- I get the kits here locally in Korea. faster and saves money

The GN Drives holder doesn't meant to rotate like HG. But the grey parts that holds the drive can actually rotate like it did in the show.

that's exactly what I mean, the grey part atleast could help in doing the gn particle shield scene pose but the holder can't rotate so you can't make it look like it's flying super fast while slashing at enemy. Unless you can also turn the gn drives but the socket for the o raiser binder is always down so it won't do any good.

H.R. gaming4plebs Yeah I too wished the 0 Raiser's flap on the wings could stay open all the way. Probably gonna have to disassemble and put some hot glue in there for that.

Why get the HG when you can get the RG?

Well I could do the RG Xn but then I'd have to pay the price of an average P-Bandai kit from Amazon OR a standard MG. Plus my RG 00 didn't really stand the test of time. Can't even stand the damn thing up let alone keep it in a pose while on a base. The RG looks sexii hands down, But I prefer the HG cause it's still able to hold its poses after what, 5+ years?

4473021 if I kush hard enough? 😎

ZakuAurelius typo Dx. The shields are hard to get out once you get them in tho, so be careful :p

LOL! KY in the house! They surprisingly do have a pretty solid Gunpla selection. Plus, the Middletown Hobby Lobby carries some decent supplies. I saw some Tamiya weathering packs in there the other day.

tbh 00 Gundam looks better without the gn drives hanging on its shoulder.

Too many equipment? Too much? ----> Mg full armour unicorn

kentz Gunpla thanks!

Yeah I said that in the video basically.

Awesome, thanks, was tldw, I'll get to watch it when I have the chance.

Lynx Gaming based on othee reviews, the Double O raiser(xn or not) is better than say Double O Quant because the symmetry is good for the torso structure. Quant tends to lean sideways due to the shield.

Paolo Antonio Lomotan I got lucky because my Quanta does not lean sideways. This can be avoided even further by removing the clear green pieces for the sword bits, because that extra weight is what overwhelms the quanta's balance in most cases.

Gusion Rebake Good for you man. The 1/100 3rd party GN Sword IV full saber might also help with counterbalancing. If you remove the sword bits though, do you mount them on the GN Sword V? At least that thing has a stand.

Paolo Antonio Lomotan Each sword bit can also be held as individual handheld weapons. Or you can omit them completely and pretend that they have deployed and are flying off somewheree far away XD

I have the MG Exia, 00 Raiser, 00 Seven Swords and the 00 Qan[T], which is basically all of the "standard" releases for this particular aesthetic, so I'll try to summarize them. Exia came out first, and it wasn't a spectacular kit. Due to the design of the feet, which lets the toes and middle of the foot bend upwards very easily, the kit is a nightmare to balance on its feet, the shield comes off the arm very easily, and the GN Sword gets floppy over time since the switchblade pivot is plastic on plastic. It does look cool just standing there, but it's just a pain to get it to do so. On the plus side, the main weapon can be assembled as either left or right handed, which you couldn't do with the HG kit, but you can't store it anywhere, it's either on the arm or not on the kit period, same with the shield. 00 Qan[T] came out next, and is much more stable, even with the asymmetry. I've had mine in a dynamic pose standing for months, and it's had no problems whatsoever. The GN Sword V is also rock solid so far, then again I don't transform it between modes like I did the GN Sword I. Like the GN Sword I, the GN Sword V can actually be held in either hand despite the arms being asymmetrical, and it can be stored on either hip. The shield is decently articulated, and since it's attached to its own arm with decent articulation it's not that hard to pose it either. The negatives with the kit are that it basically only comes with the sword, shield and bits, and the bits are boring. They don't look too cool hand-held, and they make the sword/rifle impossible to pose with in buster mode because they're so heavy, so mine are basically permanently on the shield. 00 Raiser was third out, and it's a very solid kit in every sense of the word. It kind of has to be, with that huge backpack. It shares a lot of frame parts with the 00 Qan[T], but not everything, and it has similar (really excellent, btw) articulation and stability. It also has gimmicks out the wazoo - ZA didn't show you this in the review, but you can put LEDs not just in the chest and the GN drives, but in the binders for the Raiser as well. It's easily the most visually impressive of the four kits I have, and it actually stands unsupported. I basically have two problems with the 00 Raiser kit though, and they're not fixed in the XN Raiser - First, the GN Sword III is right hand only. It can not, unlike the Exia's and Qan[T]'s swords, be assembled for left hand use, so you can't make it dual wield the things. Second, the GN Shield halves are useless, they can't be attached to the arm in a useful fashion (it would have taken one piece of plastic to make an adapter for connecting the center of the shield to the arm at an angle, but Bandai didn't give us that). Third, if I may quibble a little, it takes two extra sets of LEDs and five batteries to light the thing fully. 00 Seven Swords/G is basically the same basic kit as the 00 Raiser, except without any of the accessories other than the GN Sword II hilts and the beam sabers. In their places are new blades for the GN Sword II system, new knee pads with holders for the GN Katars, the GN Buster Sword, and the GN Sword II Blaster, all of which are pretty cool accessories. The Buster Sword mounts on either shoulder, doubles as a shield, and can take an LED unit if you want to light it up. The GN Sword II Blaster mounts only on the right shoulder, is held only in the right hand (:(), but looks pretty damned cool anyway. And the GN Sword II Long and Short blades are visually interesting in a way the originals weren't really, and the GN Katars are actually usable as both weapons and as a shield, in several different ways. The main problem is that they seem to have cheaped out a little and some of the bits have no place to store them unless they're in use, like the adapters for using the GN Katars as a shields. (The 00 frame is really really stable, though. I can get the 00 Seven Swords/G to stand with the Raiser added to its back, either complete with the binders still on the jet, or in the full 00 Raiser configuration with the GN Buster Sword in one hand and the GN Sword II Blaster in the other. Given that the XN Raiser comes with a kickstand and the default configuration leaves the shoulders, sideskirts and knees free, you can potentially load one 00 Gundam up with *all* of the addons at the same time...

Well 85% of the kit is the base 00 Raiser~ which I haven't reviewed before and am likely not to review in its own.

Bingo!

Play around with both XN and S7/G and combine them ;)

4loser69me The other two are in the 0 Raiser's binder/wing thingies lol. Don't get them on ebay, it's infested with fakes. Maybe a local store that sells gundams might have them. I think I saw them at my local Brookhurst Hobbies..