13 COOL TOOLS THAT HAVE REACHED A NEW LEVEL

Рет қаралды 3,380,272

Күн бұрын

BRAIN TIME ► goo.gl/tTWgH2
1) Wysięgnik WH-3 (Preview)
• Wysięgnik do wózka wid...
2) PDR Baton (Preview)
• Soft Dent Removal with...
• Tips & Tricks to Remem...
3) MetMo Grip (Preview)
• Metmo Grip
4) UniTec®
• Einbau des Funke uniTe...
• Einbau des Funke uniTe...
5) ITOOLco GRDXL
• GRDXL Product video
6) Zünder
• DELKO TOOLS drywall ba...
• Introducing Zünder
• ZÜNDER by Delko Tools
• What is a drywall banj...
7) Easy-Tilt
• Easy-Tilt
8) Signumat
• Wir stellen vor: Signu...
• Wir stellen vor: Signu...
9) DEWALT Door Lock Installation Kit (Preview)
• Dewalt Lock Installati...
10) Brush Grubber (Preview)
• Brush Grubber Brush Gr...
11) Gutster Demo Bar
• Gutster Demo Bar - Ca...
12) GEDORE E-TORC Q
• GEDORE: elektronischer...
13) Rhino Cable Pulling Probe
• Rhino cable pulling pr...
00:00 - Gutster Demo Bar
01:00 - GEDORE E-TORC Q
01:54 - MetMo Grip
02:46 - UniTec®
03:32 - Wysięgnik WH-3
04:20 - PDR Baton
05:12 - ITOOLco GRDXL
06:00 - Zünder
06:51 - Easy-Tilt
07:36 - Signumat
08:22 - DEWALT Door Lock Installation Kit
09:19 - Brush Grubber
10:09 - Rhino Cable Pulling Probe
For copyright matters please contact us at: copymanager.mn@gmail.com Dance of the Pixies by Machinimasound licensed under Creative Commons Attribution 4.0 int'l / @incredible-qq2zi

Пікірлер: 348

@williamfriar6295 Жыл бұрын

It’s a challenge to keep lift trucks from tipping forward when the load is right up to the mast. Extending the load arm to twice the length of the forks must result in max lift capacities of around 100 pounds.

@calscottoh Жыл бұрын

I use my 10-inch crescent wrench as a hammer, too

@sammyspaniel6054 Жыл бұрын

I used to crate pianos for a living. That piano tipping tool is genius. Pianos are shipped on their side so tipping is necessary but that's when damage is most likely to occur.

@joshmcdonald9508 Жыл бұрын

My torque wrench costs 50 dollars. If it breaks, I'm out 50 dollars. I can live with that. Imagine breaking an eight thousand dollar wrench on a two dollar bolt.

@bbalmer7878 Жыл бұрын

Probably only worth 8k it if you're bolt is going into an 800k component

@Jazzman4824 Жыл бұрын

Its more for engineers, or tester youtube channels. 8k might be a drop in the bucket if your annual budgets land upwards of hundreds of thousands to millions of dollars. Id imagine most consumers and mechanics have a budget vastly reduced from that

@k.chriscaldwell4141 Жыл бұрын

Yup, and this one will be subject to “upgrades” that brick it, with the firm disavowing all fault. Probably most useful features offered as serfware (“subscription $$$”). And a WiFi connection that will enable bad actors to find a backdoor to maliciously exploit.

@melissab5722 Жыл бұрын

Hahahaha

@seth646 Жыл бұрын

Not only are none of these more practical than their low tech counterparts, absolutely none of them are priced so that a real tradesman will seriously consider purchasing one.

@OneWildTurkey Жыл бұрын

The cable 'pulling' probe is easily replaced by a shopvac with an exhaust port and hose reducer, some paracord and an appropriately sized cap to tie the cord to. A lot less than a $1000, too.

@johnunsicker7440 Жыл бұрын

pulling line and a piece of cloths works as well.

@joesmith-eg6pv Жыл бұрын

Nothing beats an open end wrench of the right size. Otherwise, I built a forklift attachment to extend a hook 20 years ago.

@marklar7551 Жыл бұрын

That shrub puller is exactly like a pallet puller. I used one when I had to unload box trucks that were not dock high and the pallets were in the front of the truck.

@Thorinox Жыл бұрын

Those DEWALT door lock installation kits are a life saver, but I didnt pay anything close to $158, I paid $49.

@k7l3rworkman97 Жыл бұрын

Does the Whysięgnik have a counter-balance to prevent tipping? That’s actually really cool

@rn.v4629 Жыл бұрын

what about the counter balance of the forklift itself? ofcourse u move the weight so u cannot lift as u do with normal forks

@ianfrasermobile Жыл бұрын

There's a tool sold in South Africa called a "tree popper" which works better than the brush grubber and you "pop" a tree out by hand (not machine needed). It works well for any plant up to 15cm thick.

@greyghostscsa394 Жыл бұрын

The forklift attachment is not new. Granite workers have been using them for years to move slabs.

@ksteege120 Жыл бұрын

The Rhino Cable Pulling Probe reminds me that I need to schedule my next colonoscopy.

@greenm0bsta889 Жыл бұрын

Lol it would be a cold day in Hades before I'd ever pay $8500 or even $850 for a torque wrench.

@ThelifeandtimesofBarneyTaylor Жыл бұрын

And that will be the price of a normal one if you're president/corrupt government has it's way

@codyskopnik8897 Жыл бұрын

but it hooks too wifi

@charlotteemerson5050 Жыл бұрын

Haven't heard of an artic blast teaching h yet.

@BountyBoyz Жыл бұрын

Hades was a Greek God not a place

@svenben9868 Жыл бұрын

$850!?!?! its a wrench. I see no logical reason for a wrench to cost that much.

@flashflashbang2102 Жыл бұрын

Does the Metmo tool lock on to the size needed? Is there any slipping off?

@Handyman247llc Жыл бұрын

Fantastic showcase of new tools, thank you

@lindathrall5133 Жыл бұрын

I SEE FORKLIFT TRUCKS AS ONE OF GODS CREATURES AND GIVEN A GIFT OF HELPING TO LIFT HEAVY LOADS AND SAVE LIVES. I LOVE BEING AROUND FORKLIFTS I KNOW THEM BY NAME

@julianp2868 Жыл бұрын

I just love this show but I wish you had a shop yourselves so we knew where we could get these great ideas from?

@TheWillingCoyote Жыл бұрын

The brush grubber design has been sold for over a decade.

@marklar7551 Жыл бұрын

Pallet puller, you can get one from Grainger or ULINE

@nohand322 Жыл бұрын

Northern Tools sale them also.

@ChadAfricaUnite Жыл бұрын

The little tree puller is actually a pallet puller that's been around since I was a kid. You put it on a pallet in the front of a truck and drag it out with a chain to the back

@Beregorn88 Жыл бұрын

4:00 it can easily transform your forklift into an accident waiting to happen

@cleetusmacfarland9453 Жыл бұрын

way back in my teens I helped my dad clear brush and shrubs with a single chain with a slip hook, wrapped it around the brush a couple times and pull with the tractor, chain tightens and out comes the brush roots and all

@dgulssmith4063 Жыл бұрын

I love how this channel always cheers me up no matter what. Kudos!

@davidvickers2272 Жыл бұрын

The drywall banjo @6:00 has been in common use for at least 50 years and so have the stilts but the stilts are even older.

@whatsupquepasa6755 Жыл бұрын

the stilts are illeagul

@56davidwright Жыл бұрын

I have a grappling tanner that biforks the inner glut ring of most modern torque converters. This makes the removal of crimped seams a breeze and you can get them from as little as $1450 a set of you shop around. HOWEVER you can do the same thing with a bent fork and a desert spoon IF you know what you're doing.

@shaggy420ism Жыл бұрын

That door lock jig has been available from every manufacturer I can think of how's DeWalts jig any better

@najibnewman8489 Жыл бұрын

Number 2 is amazing 😻

@AndrewLaneCPA Жыл бұрын

The sewer T Connector is perfect for adding a second generator feed to the penstock for a hydro electric generator just what I need!

@jimbutke Жыл бұрын

The forklift boom is hardly new. I was using those decades ago lol

@chuckmaddison2924 Жыл бұрын

As has been said before. That torque wrench is on the expensive side. Reminds me of the hifi industry with physics free speakers and cables for $ 200000

@markcole6475 Жыл бұрын

$8500 for a torque wrench? Wow! I paid $500 for a digital torque wrench and thought that was a lot at the time!!

@calabschultz9648 Жыл бұрын

That Metmo wrench is a nut rounding nightmare

@moneybags179 Жыл бұрын

Serial killer that ends people with a $8500 wrench

@markgrant8771 Жыл бұрын

i can see that fork truck crane causing a lot of tip overs

@15DurangoRT Жыл бұрын

Yeah. You have to be a bodybuilder to use that crowbar cuz it's heavy as hell.

@crawford323 Жыл бұрын

I have the tree puller grappler. The teeth pads are not adequate enough. If they also locked behind or the gripper teeth were on curved plates to increase the surface area, perhaps the grip would be more effective.

@Bear-Cat207 Жыл бұрын

we've been using something just like that to pull skids off trucks for at least 40 years that I know of, it's hardly new.

@marklar7551 Жыл бұрын

@@Bear-Cat207 looks like this one had more substantial teeth, but doesn't look like good contact. I was surprised 20 years ago when warehouse folks didn't know what a pallet puller was, less surprised today 😂👽

@ljprep6250 Жыл бұрын

That's too bad. I use my HFT 2,500# winch and a length of flat nylon rope twisted around the trunk a few times. Route it over a spare tire and the pull becomes more vertical before it goes horizontal and it pulls 'em quite easily. Got that from another YT video. Soak the area and cut off the water 36 hours before pulling, so the water dissipates equally. It's much, much easier than digging that crap out, lemme tell ya.

@Lakota-rt2el Жыл бұрын

honestly for shrub removal just get a logging chain can do exactly what this grip can do

@nicolelala10 Жыл бұрын

@@Bear-Cat207 I haven't been in warehousing for 40 years, but yeah, we use them too. Also, notice these "shrubs" were planted in a loose dirt berm and was very wet. Totally staged to promote something that's been around for years

@LadderMover Жыл бұрын

Northern Tool sells several different models of the Brush Grubber. Priced from $60 - $110.

@sgtrock68 Жыл бұрын

In PDR, heating the dent is the last resort. I never had a problem just using a crack torch and experience. I only use heat on dents that most techs would refuse from the start. With up to 10 cars a day sometimes during hail season, I've had to paint a couple body panels over the years because I didn't like how it came out. Even when it works out great I'd usually deep discount that panel because I don't like using heat. At that point it's between me and the dent and not really about money. Reputation is everything in the PDR biz.

@klew5988 Жыл бұрын

The retail price on the Dewalt door holesaw kit is about 40$ not 150$. It is where I live anyway

@timroach5898 Жыл бұрын

The cable feeder, how well i wonder does it do with a wire tube that already has a bunch of wires in it? Then you come in and need to put more thru it.

@CONEHEADDK Жыл бұрын

You feed a string in one end, and suck it through with a vaccum cleaner.

@bradleydeturck1423 Жыл бұрын

or how about the home renovations that don't have conduit in the wall?

@benscoles5085 Жыл бұрын

in that case you either pull them all out and then run them in together, or let the job go undone, nail the wire to the outside of the wall and cover with molding. or better yet go into attic or crawlspace, run the wire through the stud cavity .

@benscoles5085 Жыл бұрын

@@bradleydeturck1423 Simple, the tool is not meant to be used in that way,

@brianlellis9602 Жыл бұрын

About the same as a regular fish tape. None of the stuff they showed on this video is a new invention. They've all been around for decades, some just have motors attached now and we're watching a video like geniuses solved a problem that didn't have an answer.

@DropDMurphy Жыл бұрын

I've been using that Dewalt door handle install kit for years. They are cheap and worth every dollar.

@bhatkat Жыл бұрын

Yeah, that and the taping banjo have been around for a long, long, time. Notice the title was weasel worded, doesn't say anything about these being new.

@DropDMurphy Жыл бұрын

@@bhatkat Not sure if you have used the Ryobi hinge mortise jig? Having both those tool kits makes door installation a breeze. All you need is a router and a corded drill and hanging a new door is child's play.

@ljprep6250 Жыл бұрын

Ditto here, but an off brand which went for $13 instead of his suggested $158. (thud)

@DropDMurphy Жыл бұрын

@@ljprep6250 Now a days I use Harbor Freight for all my tools. They are just as good half the price. I am 46 and now there are Harbor Freight stores everywhere but I can remember back in the day when they only way to purchase Harbor Freight tools was either through the catalog or twice a year they would do a traveling type parking lot tool show for a few days. Man O man, I can remember saving up as much extra money that I could and buying all kinds of stuff there. Still have a 20 gallon compressor that has to be almost 20 years old , it still works, wonder if that tank is still certified?? Now I can just drive a few miles down the road and buy what I need. I always leave there with stuff I didn't come in to buy and always drive away saying "shit!!!! I knew I forgot something!" Sorry, just felt a bit nostalgic.

@alanaldpal950 6 ай бұрын

@@DropDMurphy So you support China and the loss of all domestic tool production ?

@d3neu Жыл бұрын

That torque wrench might be for rocket or satellite technology or specialized equipment say giant wind turbines etc...

@ScooterVauto Жыл бұрын

3:32.. I see ALOT of Bent forks in their near future.. LOL

@rumplestillskin6157 Жыл бұрын

I put ground rods in dirt with a bottle of water.

@techking2000 Жыл бұрын

I love this channel. Every video is fantastic!

@ColeVanWeezy1991 Жыл бұрын

You can use a jackhammer without any fancy attachments to pound a ground rod 👍

@sticky170 Жыл бұрын

That forkliftboom would barely hold anything at that distance.

@bonesrhodes3762 Жыл бұрын

--- but it could probably turn over the forklift in a heartbeat

@mattman8569 Жыл бұрын

I've always wanted/needed a sewage pipe t-connection made easy! Said no one, ever.

@harikrishna69 Жыл бұрын

It's called trepanning

@perrinperformance1 Жыл бұрын

That forklift crane adapter has been around for a LONG time

@mencken8 Жыл бұрын

So- a fancy tool for driving ground rods that replaces a bucket of water….

@nastyfall2009 Жыл бұрын

I show these to my grandma when she falls asleep, better than coffee

@CONEHEADDK Жыл бұрын

@Techzone_1 SCAAAAAAAAAAAAAAAAAAAAAAAAAM

@altanika9545 Жыл бұрын

Love every bit of this video!

@gadgetsforgeek Жыл бұрын

Wow, Amazing, Can you send * links to all these gadgets that you post!*

@lesevesel2898 Жыл бұрын

The Metmo Grip is intriguing.

@CONEHEADDK Жыл бұрын

@Techzone_1 SCAAAAAAAAAAAAAAAAAAAAAAAAAM

@thesaparo123 Жыл бұрын

Thanks awesome information make & take work to a new level of easy

@bling1634 Жыл бұрын

Those tool will one day come Handy

@MixiVideos1102 Жыл бұрын

@akan626 Жыл бұрын

That Strut Driver isn't going to be able to drive anything into solid rock that's six feet deep.

@ariansanders5140 Жыл бұрын

Are you talking about the thing for the grounding rod? Of course it won't work in solid stone. But neither would the normal way to drive those copper rods.

@magnum357225 Жыл бұрын

For about 600 u can buy a pack of 3 torque wrenches that are quite good quality and u dont need more than that

@CougarLand Жыл бұрын

The retail prices on these things are ridiculous.

@ravenlorans Жыл бұрын

0:47 "It is a Beast"... On Plaster Walls that can easily be punched/kicked through... Now IF he was talking actual Plaster Walls using Plaster and the Wood Strips behind it.. Then Maybe.. But I am thinking he was Meaning "Sheetrock" because some people refer to that as Plaster Wall...

@mikebunner3498 Жыл бұрын

VERY COOL! Thank you man!! Quite interesting.......

@jimvick8397 Жыл бұрын

Rig that tree grabber thingie to a Come-Along... nice...

@johnhenry2903 Жыл бұрын

I don't get the brush gubber. Why pay for an additional tool when your chain, backhoe or front loader on the same tractor you're using can do the same thing.

@bonesrhodes3762 Жыл бұрын

----- because gadgets - people love gadgets

@razogarzon3248 Жыл бұрын

We used to throw chain over an old steel rim and use a truck to roll thick saplings out. Trees pull straight up easier than they pull sideways.

@howinteresting2 Жыл бұрын

Digital Torque wrench might be an overpriced overkill. Don't fancy using it lying on my back in the wet under a low clearance vehicle on hard to reach suspension component trying to read the display from the side 🤣

@roncar1761 Жыл бұрын

Tax Accountant: And what is this $140 for a bottle opener???

@reanaldrogan9852 Жыл бұрын

Love this channel

@terrismith9095 Жыл бұрын

Whoever approves of spending $8500 on a torque wrench needs to be fired.

@iamredknot Жыл бұрын

Make a video on self defence weapons, please

@agentorange3774 Жыл бұрын

Come on now do our torque wrenches really need wifi?

@alanjudd2141 Жыл бұрын

And blue tooth for music. 😂

@macdawg6403 Жыл бұрын

Nice

@robertcole7500 Жыл бұрын

Shame you didn't attach details where you can purchase this item.

@noelht1 Жыл бұрын

Me. Hey I love that demo bar I’m getting one. My wife. why are the bathroom and kitchen in the garden now?

@Cline3911 Жыл бұрын

Why are some of these tools so ridiculously over-priced? $1264 for a cable pulling mechanism? I can, and have done the same thing that machine does with a small drain snake and a drill. Cost? $49.99.

@k7l3rworkman97 Жыл бұрын

The Brush Grubber is also very cool. Could’ve used that a few months ago when pulling tree stumps out of the ground 😂😅

@gadgetsforgeek Жыл бұрын

Yes, I was also in need of that one few days back.

@mjolnirswrath23 Жыл бұрын

spare tire, Chain, and Truck hitch...

@marklar7551 Жыл бұрын

This thing is not pulling a stump out, and having the same design give up and slip off a pallet, you would need to do prep work. Rent a stump grinder

@bonesrhodes3762 Жыл бұрын

@@mjolnirswrath23 ---- yep: couple of days ago I showed a friend how to use a spare wheel and a chain to change the direction of pull to yank out small stumps - he said "that's pure genius" - I said "nope: it's redneck Jeeper - but sometimes they are the same thing"

@flashflashbang2102 Жыл бұрын

@@bonesrhodes3762 Where's the video?

@chadl5233 Жыл бұрын

The torque wrench is likely over $1,000

@scubaguy7264 Жыл бұрын

harbor freight ftw, still got my Pittsburgh

@goatboy150 Жыл бұрын

Stilts are illegal here.

@patgibson9056 Жыл бұрын

i realy enjoyed the boohunker

@talkintruth6565 Жыл бұрын

What is the new level they have reached called?

@gzo313 Жыл бұрын

Besides the door jig and the demo bar…. The other tools, dunno.

@MaxHartman-bm2uk Жыл бұрын

really cool

@shannonphillips3521 5 ай бұрын

Narrator :Youll have to wait until february 2023. ME:Watching this in February of 2024.....huh lol

@jorgevega2216 Жыл бұрын

If your tools are too expensive you'll have to pass that cost onto the customer, I had to charge a little girl 32,000 to put stickers her bike😳🤷‍♂️

@ThomasTheOlder Жыл бұрын

And I have a spaghetti-field and a brass-mine for sale!

@bonesrhodes3762 Жыл бұрын

------ fantastic: every time the cats use my baby grand, they leave it laying on its side - now I can right it onto its legs without making the dog help me

@Jose-ce4vq Жыл бұрын

How much is the pry bar

@nema151 Жыл бұрын

Hold on... i just got to connect my torque wrench to the wifi....

@shotgunhobo1776 Жыл бұрын

Meanwhile some human beings do not have food.

@Married2Jamaica Жыл бұрын

torque wrench too expensive? Just wait for the Chinese make

@theguitarscout9802 Жыл бұрын

Where do I get that crowbar

@chadl5233 Жыл бұрын

The tree or Bush puller tool will be junk because soon as it gets any kind of slack in the chain it will release the tree or bush

@angeldavidclass6980 Жыл бұрын

The door tool to make holes is over 30 years old in the US..

@siral2000 Жыл бұрын

Ya, about the same with the drywall banjo (Zunder).

@wilcleno1866 Жыл бұрын

$16.99 to $32.99 at any Lowes.

@ariansanders5140 Жыл бұрын

The product wasn't the hole saw, it was the pipe junction fitting.

@cmrs521 Жыл бұрын

@@ariansanders5140 what? It literally said it was about the hole saw jig.. "today's selection includes this lock jig.." don't know why he is paying over a hundred bucks for that

@ariansanders5140 Жыл бұрын

@@cmrs521 I thought you meant the Unitec product thing. You are talking about the Dewalt door lock kit. I must have completely zoned out during that part of the video. You are 100% right, my bad.