15,000 RPM - LEGO vacuum engine

15,000 RPM - LEGO vacuum engine | NEW WORLD RECORD!

Рет қаралды 109,650

J.MODS.BRICKS

2 ай бұрын

This weekend I achieved a new world record, just shy of 15,000 RPM with a Lego engine, no doubt it got up there at one point but my tachometer is too slow. Thankfully it didnt blow up but that’s because I only let it go for a few seconds. There was no friction damaged surprisingly so i didnt bother adding that into the vid but let me know if i should do a durability test.
Instructions are free when this video and thelast one his 10k likes combined.
You can find them and the parts list here: rebrickable.com/mocs/MOC-1754...
Check support ⁠@LucasDynamics and see his world record run with no glue.
I’ve been working on this for a long time so y’all better not say I copied him😅

Пікірлер: 226

@LucasDynamics 2 ай бұрын

Nice one! The glue is a little bit cheat😏 But I will make a 3.0 version soon!

@jmodsbricks 2 ай бұрын

The glue was definitely a cheat. Can’t wait to see what you come up with mate🙌🏻

@dsprings8565 Ай бұрын

Would a stronger vacuum be a solution?

@kinda4728 7 күн бұрын

@@dsprings8565this is what I was wondering, are they using a cheapo vacuum or per say a higher powered shop vac?

@tunk_2ton168 2 ай бұрын

it didn't look that scary on the video but it probably was hella scary in the moment. i would suggest a bent acrylic sheet over the engine as well as one for just cover to stay behind and go full beans!

@Macsneese2345 2 ай бұрын

Important Thing To Remember To Make A Very High RPM Lego Engine: Lubricant And “Glue…?” 😅 It Reached Almost 15k RPM, Thats Fast 😮

@Thatfemboydud 2 ай бұрын

Try to put that high rpm Lego turbo in the Lego buggati life sized and it has hp 😅

@johnstewart2064 2 ай бұрын

This is super awesome😁 i subscribed to watch the progress.

@secretmanPFD 2 ай бұрын

the glue is a bit cheeky - but the end result is very satisfying, so we'll let it slide

@fskartingco.1055 2 ай бұрын

Looks and sounds great, I would really like to see what this thing can do in the future. I saw another comment where you said you didn’t open the throttle more because it was making some scary vibrations, maybe some way to balance the rotor would be good?

@spartan-5795 2 ай бұрын

naturally, I wanna see it go full throttle. lol Keep up the good stuff man

@Gyhaboii 2 ай бұрын

not the craggle

@roborovskistudios4892 2 ай бұрын

💀

@LazloNQ Ай бұрын

Dude you're doing this correctly! The way to achieve high rpm is air inlet at the periphery and exhaust out the side. That's how we achieved high rpm when we built our turbines in the 1990s. The tri-rotor you used it what it's all about. You know you've achieved LEGO Nirvana when you start shearing knobs off your lego. Well done man. You've figured it out!

@Lgwasherfan5623 2 ай бұрын

Yay its V2 unlike explosion from other

@belkan_chadtechsupport 2 ай бұрын

hooray a 1 hp turbo

@colbinator73 Ай бұрын

putting this bitch on my honda civic

@henrikarvag6182 Ай бұрын

this is insane

@Guywithahat123 2 ай бұрын

Same!!! Im so hyped up!❤

@colonelgraff9198 2 ай бұрын

🎵EVERYTHING IS AWESOME🎶

@David_Mash 2 ай бұрын

You dont need glue, you need to modify your design to remain legal

@gampugv2 2 ай бұрын

🤓

@balintgalambos691 2 ай бұрын

You think thats that easy?

@David_Mash 2 ай бұрын

@balintgalambos691 maybe not as pretty but definitely easy to build more structure around it

@takeneye9912 2 ай бұрын

This reminds me of making spin tops outta those Bucky ball magnets hanging them by one off metal above and hitting em with an air can. Things had to be going like 3k before they bust into 150 balls flying everywhere haha

@xxsydeaxolotlxx4116 2 ай бұрын

YESSSS YOU DID IT! I KNEW IT

@user-th2bs7dx3p Ай бұрын

So cool!!!

@canadiantrainperson 2 ай бұрын

YEAHHHH!

@AArch64_Gamer Ай бұрын

Reminds me of the A320neo engines spooling up in MSFS

@luckichan Ай бұрын

cool!! ccan you do a super charger too?

@Da_Gr1p_R3ap3r Ай бұрын

you should attach a second one to the back and have the vacuum mimic the exhaust gasses spinning the axle connected to the other turbo spooling it up and creating boost

@Legostuffidk 2 ай бұрын

This is a really cool turbine, but it isn't the world record. I don't wanna burst your bubble but I've seen a few hit 20k rpm in the tble server without using glue. This is a really cool turbine tho

@vincetimmermans5453 Ай бұрын

in one of your youtube shorts i saw that u put the turbo on a inline 4 can u show how you atached it on the motor

@user-ud3xh2ur6t 2 ай бұрын

You better try a lego compatible iron liftarm with bearing.

@snipercat2334 Ай бұрын

Can you make a something so I can build this myself, all of the stuff the engine and everything plz

@nicholasgagliano1195 2 ай бұрын

Great job and fantastic build, I can’t wait for you to take this even further if you can !

@craysentippets3123 2 ай бұрын

Can't wait for the tutorial!!!

@TRC_MEDIA 2 ай бұрын

make it go STUTUTUTUTUTU

@DOOMZDAYxLSMA 2 ай бұрын

"BAD COP.. GET THE... KRAKLE!"

@sharonbradford4494 28 күн бұрын

Now I want you to imagine one of the electric motors running out of 12 V going 40,000 rpm that enough to make a fan blade explode easily

@hydroworldoutlook5447 Ай бұрын

0:41 Well, it’s not the only way. You could also 3D print a rotor designed to spin at that speed.

@armoredcalvary1273 2 ай бұрын

everything wrong with sound effects were great!

@K4yzn_ Ай бұрын

Yo ! I have an idea... a project ! Make a realistic car with a turbo, an engine etc... PLEASE !

@Da_Gr1p_R3ap3r Ай бұрын

also when is tutorial + parts list coming out?

@jmodsbricks Ай бұрын

I have instructions and parts list available on my Rebrickable page:)

@humbertoflores2270 2 ай бұрын

Like a real turbo it probably needed constant lubrication while spinning at such speeds

@WhyAmIHere. Ай бұрын

can it be used as turbo in LVE?

@Merlok224 2 ай бұрын

What if you merge that engine with lego I4 engine.And use that fastest engine as Turbo charger

@teamrocket3714 2 ай бұрын

Interesting

@Carbonmancer Ай бұрын

I wonder if someone can make a wind instrument with that.

@UnreasonablyIrrelevant-gv8xx 2 ай бұрын

A better solution to gluing would be finding a larger piece that's one part to replace the multiple piece rotor

@jmodsbricks 2 ай бұрын

Maybe someday. It’s not really a huge priority for me to have the world record, I just had a lot of fun making this😅

@thundermite1241 2 ай бұрын

Sounds like a hellcats supercharger

@themjohnsons 2 ай бұрын

🙌🏻🙌🏻

@Dan-vq4pz 20 күн бұрын

Hey mate, you try balancing the rotor at all? How's vibration?

@Dan-vq4pz 20 күн бұрын

If you're gluing might as well start shaving parts

@PandaHiveGaming 2 ай бұрын

Nooo not the kragle 😂

@jmodsbricks 2 ай бұрын

I had to😭

@greenphantom093 17 күн бұрын

This is a rotation based turbine,similar to the jet engine.👍

@user-wu5ep1mz9b 2 ай бұрын

Cool turbo Now make a lego Blow off and intercooler!

@jmodsbricks 2 ай бұрын

Lego intercooler😭 how would that even work?? I like where your heads at

@user-wu5ep1mz9b 2 ай бұрын

The Turbo alone Blew my mind!@@jmodsbricks

@sharonbradford4494 Ай бұрын

Imagine if the electric motors went that fast like you can have a really small motor driving a big set of blades and it was just shred the blades

@Baby_Jeebus 2 ай бұрын

If you hooked this up to a vacuum and attached to a LEGO car. Would it make other go?

@jmodsbricks 2 ай бұрын

yes!:)

@dumsmaxime854 Ай бұрын

How work the throtle ?

@jmodsbricks Ай бұрын

Just changes the amount of air that is allowed to pass through

@Mada_kr Ай бұрын

Unfortunately that's not the world record. I have 34k rpm on video with mine

@brickleyyard4966 2 ай бұрын

This is not really official as the record was set without modifications right?

@MostEpicMineCraftPlayer 2 ай бұрын

fun fact: Lucas did not have the wr this other dude did with 14k rpm but you beat his by like 200 rpm I think edit: yeah you beat the real wr by like 400 rpm but Lucas did not have the wr before you took it maybe next time do some more research edit 2: the previous wr holder was Owen vansanten on yt

@jmodsbricks 2 ай бұрын

ya, i probably should have done a bit more research.

@holzwurm_hd7029 2 ай бұрын

You used glue im not quite sure if that disqualifies you.

@jmodsbricks 2 ай бұрын

Meh, I had fun and came up with a completely unique design. I don’t really mind if I’m disqualified😅

@idk-mv2oe 2 ай бұрын

i was surprised when you said the blades were going over 100 MPH (4:01)

@connerthatdude9369 2 ай бұрын

I tried building one of these and it blew up on me. One time completely before I decided to glue stuff. Then it melted the plastic shafts

@jmodsbricks 2 ай бұрын

LOL - lots of lube

@paradiselost9946 15 күн бұрын

remember the air here is still limited in the speed it can achieve... theres certain basic physics governing air speeds due to pressure differentials. if one asked this turbine to do actual work, at max efficiency it would run at half the speed of the air flow... and despite how it seems... the air is expanding, as it enters the lower pressure... probably get slightly better results running backwards to this... intake in the center. like a normal centrifugal impeller... youre asking the air to flow backwards to how it wants to flow here. it wants to fling out, the air mass entering from the center... its that incoming airmass that does the work. its odd. i have one of them little 250s that happily revs at 18K... the tacho doesnt even register below 4K. yet i jump on a lathe and just 500RPM seems stupid fast...

@brighamprice4630 2 ай бұрын

can you sshow us how you routed it to the i4 and how it works, as well as how much it will do for the i4

@legobrick947 2 ай бұрын

Looks like a whistle

@kako4211 2 ай бұрын

insane GJ

@lilshankzz2413 2 ай бұрын

2:20 don’t forget to lubricate the backside

@Wywydoesstuff 2 ай бұрын

Why do you use a gear reduction, it would be faster it was right off the axle

@jmodsbricks 2 ай бұрын

My tachometer only goes up to 2,500 rpm(not even close to 15,000) so I put a 24:1 gear ratio on the output and just multiplied the reading by 24

@Wywydoesstuff 2 ай бұрын

@@jmodsbricks oh i see

@frostcatgamings9322 Ай бұрын

Jdm driver has been really Quiet after this dropped

@HemiHalfCentury Ай бұрын

More of a reverse air pump no?

@PsychoBigfoot 2 ай бұрын

engine tutorial pls

@jmodsbricks 2 ай бұрын

Instructions on my Rebrickable

@PsychoBigfoot 2 ай бұрын

i didnt realize thx

@sharonbradford4494 Ай бұрын

That thing is a jet engine on steroids

@mysticalgames9741 2 ай бұрын

ah yes, nuclear reactor condenser is my next objective

@ILikeCars888 Ай бұрын

Mechanics and engineers playing with legos

@MakerOfBricks Ай бұрын

I don’t have a video or anything to prove it, but i’ve made a 2 bladed one that hit 17k rpm

@Tumeshwar-ou7uy Ай бұрын

Bro trembling

@Brunon-bj1hx 2 ай бұрын

Just make the rotor out of technic it's stronger, don't use glue

@jmodsbricks 2 ай бұрын

I did try that but the spacing wasn’t quite right

@user-bp9rm9wx4v 28 күн бұрын

Literally no one :the turbines be like in Chernobyl at the disaster

@user-wf2io5zp4s 2 ай бұрын

You should go full blast. That thing wasn't even half open

@jmodsbricks 2 ай бұрын

I was shaking. Thing is scary as hell😅

@user-pu4py3zk6c 2 ай бұрын

@@jmodsbricksMaybe try use pneumatics or a large string to pull it out? so you can be further away

@jmodsbricks 2 ай бұрын

@@user-pu4py3zk6c I gotta do that a rig something up for the tachometer. Then I could just start it and leave the room

@user-wf2io5zp4s 2 ай бұрын

@jmodsbricks but that's the fun of it

@RANDOMLYSTUFFED 2 ай бұрын

Kraggle. Isn’t that the red shit Emmitt had on his back in the first Lego movie?

@jmodsbricks 2 ай бұрын

Ya😅 the forbidden

@ScKTM68 17 күн бұрын

Fiat Panda turbo

@oPlazmaMC 2 ай бұрын

NEW RECORD ONLY WITH LEGO (no other substances involved no glue at all)

@jmodsbricks 2 ай бұрын

😅

@Dudeface167 2 ай бұрын

Im up for it

@Nintendo3D5 Ай бұрын

2:06 Villager

@the_robloxlord4360 2 ай бұрын

try making it go as fast as possible without breaking it

@shlushe1050 2 ай бұрын

Try silicone lubing it! Just run it slow and spray in the intake and where the axle comes out, you'll break 20k!

@Dudeface167 Ай бұрын

I might have just broken this record

@Dudeface167 Ай бұрын

I was wrong its hard to break records

@jmodsbricks Ай бұрын

Keep trying, I believe in you🙌🏻🙏🏻

@Dudeface167 Ай бұрын

Got a faster one now :)

@ezzatlotfy6054 2 ай бұрын

Where can you find the world record?

@jmodsbricks 2 ай бұрын

I saw a video on another channel. I linked him in the description

@LucasDynamics 2 ай бұрын

Hi😏

@jmodsbricks 2 ай бұрын

^^^There he is

@JBRIX 2 ай бұрын

Actually its guy named Owen Vansante, he went to 14k

@JBRIX 2 ай бұрын

kzfaq.info/get/bejne/eJp6ibV_zJrDook.htmlsi=AaSkxIf9tlORUiCu the old so called record holder

@theernyclanyt 2 ай бұрын

you can see how much you are shaking

@jmodsbricks 2 ай бұрын

😅

@MULLETHEMULLVAD Ай бұрын

WR is at 31k rpm atm

@TheLegomecanic Ай бұрын

Who did it

@solomon9388 2 ай бұрын

Why is bro naming stuff the wrong things 💀

@jmodsbricks 2 ай бұрын

There’s a few reasons for why I pick my titles. 1. It’s going to act as a turbo, it’s just not fully integrated yet. 2. It’s close enough and if I called it a “centrifugal pump”, less would click on the video. 3. It’s a Lego demo, It’s not like I can build a legit combustion engine with a properly functioning turbocharger out of plastic bricks 4. People who comment corrections are just boosting the video engagement. I hope this makes sense:)

@Croissant.243 2 ай бұрын

good

@kinggeorgessawmill3807 2 ай бұрын

I know you won’t change the name but please don’t call this an engine this is a turbine there is a major difference. A turbine is only an engine if it is being used to produce thrust. Otherwise great vid good luck with your next venture. seriously tho don’t use false terminology. :)

@CP._.bloger._.55 Ай бұрын

Хочу туториал

@XOTICXPATRIATE 2 ай бұрын

Congratulations my friend you did it! How does it feel to break that record!

@jmodsbricks 2 ай бұрын

I did cheat a bit😅

@GamerTag700 2 ай бұрын

@@jmodsbricks good JOB can i get a shout out?

@XOTICXPATRIATE 2 ай бұрын

Do you mean using the glue on the impeller? The way i see it you did what you had to because little plastic lego bricks were never meant to be spun that fast much less endure those levels of G forces. @@jmodsbricks

@TwistedEngineering 2 ай бұрын

not a wr

@XOTICXPATRIATE 2 ай бұрын

maybe that was never the point but at least he reached his objective and I think that is admirable to me.@@TwistedEngineering

@Darkknightleland 2 ай бұрын

@jimarapidis 2 ай бұрын

æ🔥🗣️

@frazersarson9549 2 ай бұрын

U gotta try and make the smallest Lego vacuum engine and put it in a sports bike

@Idkwholmao 2 ай бұрын

Now, make it faster! Maybe some kind of gear overdrive?

@makskozak122 2 ай бұрын

Plis make a tutorial pls pls pls who want a tutorial click thumbs up

@jmodsbricks 2 ай бұрын

I have a full on instruction set on my Rebrickable

@spacebo1._. 2 ай бұрын

just empty the vacuum

@jmodsbricks 2 ай бұрын

It’s a central vac, not really that easy

@Spleeens5 2 ай бұрын

Just watch the video of him making it and boom. Tutorial

@temiloluwa8 2 ай бұрын

Oh yea i watched it the turbine went 💥boom

@Brunon-bj1hx 2 ай бұрын

This is not an engine ,it's a turbine they are not the same thing

@GXVoid116 2 ай бұрын

all these past wrs are technically turbines. how else are you meant to make it

@rasyaar5124 2 ай бұрын

Who cares still cool

@Brunon-bj1hx 2 ай бұрын

@@GXVoid116 like he made them before? His older projects where engines

@GXVoid116 2 ай бұрын

what you mean with pistons? yh fair enough but pistons never gna get world record for rpm bc too much mass. the past recent world records were all like this one

@korathink 2 ай бұрын

Vacuum