SPOILER ALERT! hey guys welcome back, I'll be installing a "si" wing on my friends new 4dr. I hope this video helps. Any questions ask below, thanks!
Пікірлер: 44
@harryl82344 жыл бұрын
Those hex head bolts will rust in no time. You should have got stainless hex head bolts instead. Also, since you drilled holes on the trunk you should have painted the holes because it is bare metal. The paint will prevent rustng in the future.
@robertmeyer87352 жыл бұрын
AND, 3 years later in 2021 I just bought this for $149.99, I'll be using stainless buttonhead bolts, but great video. Mine will be on 2020 Mazda6
@boomshakalaka80545 жыл бұрын
9:22-9:24 I saw you, quit trying to hide. Lol !
@yefrisosa10525 жыл бұрын
Size of the bolts please!!! 🙏🏻 and excellent video 👍🏻
@khmerz975 жыл бұрын
Hi bolts are M4x0.7 I have a new updated video which shows them sorry about the late response
@maldo725 жыл бұрын
I cringe becuase its going to leak water into the trunk (there is no rubber gasket between the mounting of the spoiler and trunk lid )
@khmerz975 жыл бұрын
Agreed. It's what "customer" wanted. I did suggest we cut out gaskets but he didn't want to spend anymore money.
@fredhibbert14003 жыл бұрын
@@khmerz97Good day any idea where I can purchase a gasket for this or will it have to be made? Trying to install one...
@mvc21772 жыл бұрын
Hey man, would you happen to have a better view of the wing on the car after install. Looking forward to one but would like to see how it looks from different angles
@azalavia5 жыл бұрын
Thanks for the video. Have you tested for waterproof?
@khmerz975 жыл бұрын
With all the rain recently my friend has not had any problems with the rain getting into the trunk.
@praharsh144 ай бұрын
1:45 Did you tap all the way through the glue/plastic for the front holes? Would it not go through the mount?
@kitzpadilla36583 жыл бұрын
Fawk dude I have 2020 civic do u think this will fit ?
@khmerz973 жыл бұрын
I'm pretty sure it will, we made our own holes.
@iforgotmyscreenname13 жыл бұрын
I am NOT an auto expert but when you drill holes into your trunk, you better know what you're doing. My older brother did exactly the same thing and when it rain, water goes into the trunk.
@khmerz973 жыл бұрын
I believe you, I had grommets I put in as a weather seal. Usually all upper panels run into the roof channels, but so far no issues with the rubber grommet
@xjossee5 жыл бұрын
Have you installed a rear diffuser with its own led brake light for a 2016-2018 civic? I don’t know which wires to tap and there’s nothing on google or KZfaq on the wiring doing the wing was a breeze with this video but I wonder about a rear diffuser brake light.
@khmerz975 жыл бұрын
I'll be doing another install within a week or so, and I can show you. With the third brake light you can tap into any of the existing wires on from the brake lights. There should be 2 wires power (green) and ground (blk).
@xjossee5 жыл бұрын
BENITH thank you! Will try that and if it doesn’t work, I’ll wait for that video.
@xjossee5 жыл бұрын
Just got the diffuser wired up and works fine. I got thick copper wire and used electrical tape to extend the wire reach all the way to the brake lights. I tried to use the wires in the trunk near the spare but for some reason, tapping into them wouldn’t work. So I used the ground cable In tail light for the black grounding cable on the diffuser light, the red cable on the diffuser light goes to the main brake light, and the white diffuser cable goes to the daytime light (i believe it’s white, kinda looks grey too but just find your daytime wire in the tail light. Pretty sure you already know all this but just in case you didn’t. :)
@khmerz975 жыл бұрын
Oh nice! I didn't know you wanted consistent power. I see what you did there. You wanted it constantly on as well as a brake function, right? Awesome man glad it all worked out for you. What's your IG? Would like to see pics
@xjossee5 жыл бұрын
BENITH yeah! I wanted it on whenever the brake lights would be running. It really makes my car stand out at night. My IG is a portrait page but I can dm you pics of my car on there. I started a new car page and I’ll be using my DSLR for car pics. My main page is @jsxmedia I’ll follow back.
@Oceanicbill Жыл бұрын
I have the same kind of spoiler and I bought it off eBay and when it shipped the screws and bolts fell out so all I have is the spoiler and mounting brackets for it so do you know what size scews and bolts are required for that specific spoiler?
@luissvlogs243 жыл бұрын
Good video
@yousuf1234567896 жыл бұрын
Hey what’s the size of the bolts you got from Home Depot?
@khmerz976 жыл бұрын
I'm sorry, I forgot I brought the wing inside and used the measurement gauge they have hanging to determine the size. If I get a chance and find the extra bolts I have I'll let you know further. Thanks again for the support!
@tristanmaraan63495 жыл бұрын
Do you think it'll look weird if you didn't add the brake light onto the spoiler? I'm trying to buy to same spoiler but not tryna use or add the brake light
@danielviveiros17735 жыл бұрын
And that's why it was $70
@jingikio125 жыл бұрын
Why? What is wrong
@JGM_Visuals4 жыл бұрын
jingikio12 didn’t have the right screws and the threads were fucked up, you pretty much get what you pay for. I just got my Si replica wing as well for Mine gonna install it soon
@franchisefred40662 жыл бұрын
@@jingikio12 well worth the $70. Today it’s $80-$150 for the same wing 😂
@shehan405 Жыл бұрын
Some one pleas send me the link where i can oder this spoiler ...
@gfmathomas4 жыл бұрын
Do the brake light work.
@khmerz974 жыл бұрын
Sorry for the late response. Yes just use a tap to a existing power wire.
@nickbooker165 ай бұрын
What size is that spoiler
@saoodbabur60723 жыл бұрын
can i install this with 3M tape instead of bolts? my package did come with 3M tape as well
@khmerz973 жыл бұрын
The support needs bolts, your package should have nuts/threads on the spoiler.