18 speed Eaton/Fuller Road Ranger how it works & look inside changing gears powered by a big drill.

No video

18 speed Eaton/Fuller Road Ranger how it works & look inside changing gears powered by a big drill.

Рет қаралды 5,833

Johny Jake Brake

Күн бұрын

my gear box after Auxiliary box overhauled.

Пікірлер: 15

@teamwounder 2 күн бұрын

Rock solid gearbox

@ElThomsono 11 ай бұрын

This is the sort of stuff KZfaq was made for.

@johnyjakebrake5825 11 ай бұрын

Thanks for your comment 👍.

@heavywrenchkris 4 ай бұрын

Transmissions are so cool. Thanks for the video!

@montycrain5783 3 ай бұрын

Very Informative. I Don’t know why all the light trucks manufacturers didn’t just use some of the light 10 speeds like a RT-510 which according to Eaton is rated at 950 ft lbs at max load. I’m sure a Overdrive could be added. The same weight as a NV5600. If semi synchros were needed I’m sure they would have added those. As long as it could be floated without damage it would be better than anything they’ve ever used. It would have saved so many owners, particularly Cummins owners so much headache.

@WilleJamesHuff 5 күн бұрын

True. Especially the nv4500’s. In stock form they aren’t rated for much more torque than the 5.9 Cummins made from the factory.

@alexjohnward 11 ай бұрын

this was great, but I still only see four speeds, not 18!

@johnyjakebrake5825 11 ай бұрын

This is true but if I did 18 there's still only 5 gears to use, if I split and Ranged we'd be using the same gears in the main Box, plus I didn't have the air supply set properly. Thanks for your comment.

@epnazlou 3 ай бұрын

what the biggest gears toward rear are for ?

@johnyjakebrake5825 3 ай бұрын

Reverse then crawler which is mentioned.

@epnazlou 3 ай бұрын

i see 3 sliding clutch , are gear 4 or 3 then 2 or 1 then R or crowler ?

@johnyjakebrake5825 3 ай бұрын

Put the sound on we tell you as we operate it what is what. Cheers.

@BrosNaem9999 11 ай бұрын

Restore

@tomchekotevski9105 15 күн бұрын

Your video should be a compulsory watch for apprentices so that they can get a better understanding of gearboxes and ratios. But don't give them that screwdriver m8. Cheers from down under

@johnyjakebrake5825 13 күн бұрын

@@tomchekotevski9105 agreed! Drivers too they would possibly understand Why they crunch constant mesh gear boxes then? Thanks for your comment.