#182

Рет қаралды 12,711

Күн бұрын

I've been having a lot of fun with Resin and when I got the new SAM River & Art Epoxy Resin the idea to try and conserve a Dandelion was the first thing that came to my mind.
Well it was a true challenge to figure out how to get this done and get a good result.
This is my very final attempt on the Dandelion, many other projects will follow...
--------- Content of this video --------------
00:00 : intro
01:13 : dandelion preparation tip
01:45 : pouring the resin
02:25 : no bubble tip
03:30 : pouring the base 1
07:00 : pouring the base 2
09:50 : unmolding
11:02 : end results
11:53 : outro
Thank you for joining this creative journey and watching my video.
If you enjoyed it please consider to subscribe, give it a 👍🏻 and share, this helps my channel a lot!
Please feel free to leave a comment or request.
If you would like to purchase or commission a piece please contact me through Instagram / unbounded.art.by.randyv
Donations for my channel are welcome on my PayPal account, they all go right back into supplies.
www.paypal.me/UnboundedArtByR...
Thank you for www.Siliconesandmore.com for gifting me most of the products used in this video like the SAM River & Art Epoxy Resin, Plasticine, Resin Tint and Isopropanol Alcohol.
If you are interested in buying any of the products ( they do ship to NL/BE/DE ) here's the link to there website www.siliconesandmore.com
Visit their instagram / siliconesandmore
Or send an email to info@siliconesandmore.com
This video was filmed on September 24th 2021
Please note that I'm not responsible or can be held liable on how you use your material. Please follow the safety instructions from the manufacturer.
My video and audio may not be used without permission.
#Art #Pour #Flow #Artoftheday #Pouringresin #resinart #Flowart #Fluidart #Abstractart #Satisfying #Easyart #Forbeginners #Creative #Artlovers #resinpouring #Liquidart #flow #Pouring #Pourart #Satisfyingresinpouring #Modernart #UnboundedArt #UnboundedArtAndCrafts #SiliconesAndMore #Resin #HowTo #Tutorial #SAMresin #epoxyresin #RiverAndArtEpoxyResin #epoxy #epoxyhars #epoxyharsgieten #makkelijk #paardenbloem #gifted #Dandelion #firsttry #shiny
music by
orangiromusik from pixabay

Пікірлер: 29

@Embracetherandom 29 күн бұрын

Awesome tutorial. Thank you for sharing!

@UnboundedArtandCrafts 29 күн бұрын

I'm glad you liked it 😊

@jeweloftheisle498 8 ай бұрын

I liked this. I even liked the bubbles they look good.

@UnboundedArtandCrafts 8 ай бұрын

Thank you ❤️ I like the bubbles too as they look cool with the light underneath but most want the bubble free version ☺️

@sherylsilkie9954 8 ай бұрын

Thankyou for this tutorial. I was wondering “how to” do this. 👏👏👏👍

@UnboundedArtandCrafts 8 ай бұрын

Thank you 😊 Every Resin and every environment is different so maybe you don't need to but in any case have fun making it ❤️

@ChesneyAdventures 11 ай бұрын

Beautiful

@UnboundedArtandCrafts 11 ай бұрын

Thank you Tammy ❤️

@artwithalison 2 жыл бұрын

Very good tutorial Randy. You explained everything very clearly and the result is amazing 👏 👏👏🤩

@UnboundedArtandCrafts 2 жыл бұрын

Thank you so much Alison ❤️ I do my best to make my video's instructive and still not tooooo long 😅

@lorrainehayes4688 Жыл бұрын

Love this….

@UnboundedArtandCrafts Жыл бұрын

Thank you Lorraine ❤️

@PhoenixSpirit2023 2 жыл бұрын

Thankyou. I was about to give up on dandelions. I did one yesterday. No puffs fell off but full of air bubbles. Maybe I'll have a go now heating it iup

@UnboundedArtandCrafts 2 жыл бұрын

I really hope it helps you 🤞🏻

@jocelynrichards493 Жыл бұрын

Wow..beautiful! What are those cups and where Would I find them?

@UnboundedArtandCrafts Жыл бұрын

Thank you Jocelyn ☺️ These were just the mixing containers I got with the Resin. As long as the inside of the container is shiny and has no marks/text it should work but to be safe you could aways use some mould release 💡

@ChesneyAdventures 11 ай бұрын

Im new to resin. Would lets resin fast curing be too heavy of an epoxy to do this with? I just got it yesterday.

@UnboundedArtandCrafts 11 ай бұрын

Thank you Tammy ❤️ I wouldn't use a fast cure as it will harden too fast for all bubbles to go.

@bunnicash1 Жыл бұрын

May I ask how long you left the one in the warm tap water?

@UnboundedArtandCrafts Жыл бұрын

Till the resin was at the gel stage and no bubbles would be able to get out. I just kept taking the cooling water out with a big syringe and adding new warm water in.

@bunnicash1 Жыл бұрын

@@UnboundedArtandCrafts thanks! Good info!!

@goober685 9 ай бұрын

Doesn't heating the resin make it cure faster?

@UnboundedArtandCrafts 9 ай бұрын

Normally you would think so but I'm not super heating it I'm just heating it enough for it to stay more liquid.

@stevewalls5070 Жыл бұрын

Use a pressure pot I leave my molds in for 24 hours and never any bubbles

@UnboundedArtandCrafts Жыл бұрын

@Steve Walls I know but not everyone has that much money to spend 😉

@pauldejesus9644 9 ай бұрын

how long did you wait to break off the stem

@UnboundedArtandCrafts 9 ай бұрын

Hi Paul 👋🏻 can you please explain what you mean? As I pushed a stick in the stem when they were fresh and then let them dry, so the stem is still on.

@pauldejesus9644 9 ай бұрын

@@UnboundedArtandCrafts in the video you said that you let the resin set so that you could break the toothpick off. I was wondering did you let the resin set for 24 hours?

@UnboundedArtandCrafts 9 ай бұрын

Ah okay not the stem but the toothpick 😅 I let the resin fully set because otherwise you could still move it and ruin the piece. And I needed to pour the second layer as well and you don't want that to sink into the clear resin below.