190cc Four Stroke Daytona Shifter Kart Engine FE 4 Valve 5-Speed

No video

190cc Four Stroke Daytona Shifter Kart Engine FE 4 Valve 5-Speed

Рет қаралды 7,508

Күн бұрын

Daytona 190FE 4-valve 4-Cycle Shifter Kart Engine with 5 speed gearbox
Includes parts as pictured:
Onboard Starter
Shifter
Intake manifold with boot and hardware
PE28 carb
Air filter
CDI box
Coil
Wiring Harness
Engine mount for the Daytona 190FE will be available from Odenthal
Exhaust Muffler Designed and Supplied by M4 Exhaust
Chassis is a 2021 TrackMagic FV 125cc Shifter Chassis
If you find value in the content of these videos, consider a donation to our project.
www.paypal.com...
Another video brought to you by www.norcalkarte...
You can also support our channel with purchases from our affiliate eBay Store -
Extra Kart Parts
rover.ebay.com...
Norcal Karters on Facebook - / norcalkarters
Norcal Karters on Instagram - / norcalkarters
Daytona 190 Facebook Page - / 633182428415371

Пікірлер: 40

@Ericvander105 Жыл бұрын

These engines are almost indestructible There should be a National class

@NorcalKarters Жыл бұрын

There's an event in Reno this weekend demo'ing the units on karts. facebook.com/groups/633182428415371/?ref=share&mibextid=NSMWBT

@marcellopriatama6183 2 жыл бұрын

Occasional daytona machine gift for subscriber of this channel😂😂

@NorcalKarters 2 жыл бұрын

Great idea!!! Would you like to be our first give-a-way sponsor of the engine? Sponsors needed for Norcal Karters

@The-BCC 2 жыл бұрын

I have a pit bike shop close to pats acres selling YCF/Sunday bike & Daytona motors and parts in stock. 🤠 I’m also developing some parts for them as well. It would be great to see you run it sometime and meet you…

@thiswillprobhrt 2 жыл бұрын

What parts are you working on Adam? I’m having an output shaft extension and support designed/made. I already have a couple of different mounts at this point along with a shifter setup that’s integral to the motor.

@NorcalKarters Жыл бұрын

@@thiswillprobhrt hoes the output shaft mod coming along?

@kingkong81icloud Жыл бұрын

The Daytona engines are made in china not Japan, about 7 years ago there was a bike shop selling a pit bike with the same engine and it was brand new for £1000 English, I thought it was expensive but looking back I wish I would have bought it , I got a nice 91 YZ 250 that was just stupid fast was hard to keep the front wheel down, I flipped it on road an fractured my elbow lol

@mikekorn6968 2 жыл бұрын

Very cool.

@johnluciene1292 3 жыл бұрын

I built the same set up with CRG 5 years ago.

@NorcalKarters 2 жыл бұрын

How was the build? Was it straight forward?

@johnluciene1292 2 жыл бұрын

@@NorcalKarters I posted photos on Norcal Karters FB page. on your post. quite a bit of fabrication.

@NorcalKarters 2 жыл бұрын

@@johnluciene1292 OK, I will check that out. Thank you

@voithy8351 Жыл бұрын

im having a really hard tim finding a carburetor and intake for this engine if you could send me a link that would be awesome

@marmonatcpl Жыл бұрын

I’m trying to build one right now, there is a 190 with zero overlap cam. Don’t know much about it but I can clearly see the “Fe” work well. Any thoughts on the zero overlap cam model? Thanks

@NorcalKarters Жыл бұрын

As the project builds more momentum and we see more builds coming through, we will be able to address the many different options and variables of the Daytona engine. In the meantime, join the official discuss group - facebook.com/groups/633182428415371/

@marmonatcpl Жыл бұрын

And how did you relocate the rear sprocket in-between the bearing cassettes? Did you some how make a key way in between or is there a different sprocket hub that Dosent use a key way?

@NorcalKarters Жыл бұрын

You'll have to machine a keyway or pegs between the carrier. Would it be beneficial to have axles ready to go?

@dirtysock1able Жыл бұрын

@@NorcalKarters wat sprocket size would be best for this engine ? N is there a sprocket hub that doesn't need the key way ?

@NorcalKarters Жыл бұрын

@@dirtysock1able It's a shifter kart so the optimum gearing is going to depend on the track. You can look for the Daytona group on facebook and they will have more baseline set ups available for your particular track lengths. I'm not aware of any sprocket or hub set up that does not require an axle key. The force is to great and will cause the sprocket to spin on the axle, ruining it and making it a B to remove

@dirtysock1able Жыл бұрын

@@NorcalKarters cant find anything on how to install the key for the sprocket to place it in the middle like he did .... need atleast a pic to get a idea ... n I'll be driving my around the block in my town most of the time

@dirtysock1able Жыл бұрын

@@NorcalKarters can i use tony kart spindle parts on birel frame??

@omytorres7558 2 жыл бұрын

Nice video bro but I have a question that it has 5 speeds and 4 valves and it is 190cc right? you can do 212cc?

@NorcalKarters 2 жыл бұрын

I'm still keeping an eye on this project as it progresses, but from my understanding there are a number of upfit options.

@omytorres7558 2 жыл бұрын

@@NorcalKarters ok i understand thank you very much

@The-BCC 2 жыл бұрын

Yep, there are 212cc kits for $300

@charlesdu9941 10 ай бұрын

How much power do these make?

@Tuckem2STOGS 2 жыл бұрын

Any links for a exhaust looking on Amazon can't find anything

@NorcalKarters 2 жыл бұрын

heres a start - www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=190cc+daytona+ycf+exhaust&_sacat=0&LH_TitleDesc=0&_odkw=190cc+Daytona+YCF&_osacat=0&mkcid=1&mkrid=711-53200-19255-0&siteid=0&campid=5338819984&toolid=20008&mkevt=1