#193

Рет қаралды 33,213

Жыл бұрын

Email us at glitznglittermichelle@gmail.com
Buy Me A Coffee Here! Thank you so much ! bmc.link/glitznglitr
To Become A Member of My Channel: www.youtube.com/@glitznglitte...
JOIN MY NEW FACEBOOK GROUP HERE!! / 233554272787110
Would you like a tour of my new resin room with poured resin counters? Click here: • #5 Full Tour Of My Res...
Click here for an easy quick way to clean your wet resin containers: • #13 How To Clean Your ...
Amazon Wish List: www.amazon.com/hz/wishlist/ls...
If you will be shopping on Temu - Please consider using my affiliate link here:
Temu Affiliate Link : temu.to/k/userFvCGhWawjG7
Temu Code: afd56942
_____________________________________________________________________
Let's Resin Affiliate Links:
Lets Resin - Resin Curing Machine: amzn.to/3NXkWXu
Let's Resin 150oz deep pour resin: amzn.to/43BMQwX
Let's Resin 20oz fast cure resin: amzn.to/44U9hOZ
Let's Resin 720z fast cure is amzn.to/3QCH3EH
Let's Resin 1gallon epoxy resin: amzn.to/3DJNRsd
Let's Resin 1 gallon table top resin: amzn.to/3Qxmidz
Let's Resin Polyurethane resin: amzn.to/3Q0qC4E
Let's Resin white alcohol ink (C deeper): amzn.to/3O4ZI8W
Let's Resin 450ml silicone cup: amzn.to/43SZOXv
Let's Resin 26 colors ink set: amzn.to/3q2vmMn
Let's Resin resin tape: amzn.to/47qgisU
Let's Resin collector mat: amzn.to/47tUkWa
________________________________________________________________________
Resiners Resin Dryer for Cup Turner --
resiners.com/collections/resi...
Amazon link For Resiners Products:
the AirLess bubble removal machine --www.amazon.com/Resiners-Remov...
Resiners Resin Dryer for Cup Turner -- www.amazon.com/Resiners-Machi...
_____________________________________________________________________
Misc. Items
99% Alcohol: amzn.to/3Z83cve
Heat Gun: amzn.to/3n6j9ol
Mini Torch: amzn.to/44vRJsp
Large Torch: amzn.to/46tqq3E
Large Disposable Mixing Cups: amzn.to/3TuByqW
Small Disposable Mixing Cups: amzn.to/3A2QCTy
Silicone Tool: amzn.to/3orcB46
Craft Knife: amzn.to/3KcLpOW
Deburring Tool: amzn.to/3lBzAs8
Lets Resin - Resin Curing Machine: amzn.to/3NXkWXu
Tumbler Turner: amzn.to/436Lrye
Mini Torch: amzn.to/44vRJsp
Large Torch: amzn.to/46tqq3E
Mica Spoon: KN10425
Cricut: amzn.to/3Qh1LcM
Happy Mail:
8730 Mystic Circle
North Port, FL 34287

Пікірлер: 172

@cordeliagriffith5925 6 күн бұрын

Awesome tutorial you were very helpful. !!! Might I also add that your seahorse is Absolutely Stunning 😍 Thank You for sharing with us ❤❤❤

@pulsetkr45 Жыл бұрын

WOW! Thanks Michelle for doing this video and inspiring me to step out of my comfort zone when it comes to making molds instead of having to buy those high dollar ones that I cannot afford!!! Your awesome!!!!!

@glitznglitterbymichelle1 Жыл бұрын

You can do it! 😃

@ZippedUpKitz 6 ай бұрын

Hey, injustice thought I would let you know how I got all the bubbles out of that mould…. I got them at Christmas to make wreaths and I happened to remember this video and how you got a couple of bubbles in the tips… well, I sprayed 99.9% isopropyl alcohol into the mould before I poured my resin… making sure each crystal had the alcohol in the tips… after I poured the resin, I took a long tip paint brush and went through each crystal making sure I got down to the tips… they came out beautifully!!! I was scrolling through my feed and saw your video again and I just thought I would let you know how I got my crystals to come out bubble free… have a blessed day!!

@glitznglitterbymichelle1 6 ай бұрын

Thanks

@angelortega7708 Жыл бұрын

I actually did this the other day, but I just use the hundred percent silicone that you use in your bathroom. I’ve been trying to figure out a way to make a live edge. That’s pretty cool that you’re showing it now. Thanks for sharing!!

@ritaprovencher6048 2 ай бұрын

Now i see why some homemade mold cost so much. Theres alot to it. I had been wanting to know how to make them. Its alot of work. Wow!❤❤

@knitsewfancy Жыл бұрын

Please accept some well-intentioned advice from someone who has developed debilitating dermatitis on my hands...wear nitrile gloves when using any epoxy or other chemicals. Even water feels like burning acid to my hands. Everyday tasks are either very painful or not possible due to swelling and broken skin. It's terrible.

@garyoverman4393 Жыл бұрын

I worked in industry where epoxy resins were used in bulk. Many people used epoxy with no problem… for years… and then suddenly they become allergic to the resins 😮 and it seems to be permanent.😢 I use it at 64 , but I power ventilate and use liquid glove (glove in a bottle) as a skin protection barrier. Even if the smell isn’t strong it doesn’t mean the fumes and allergies can still be problematic. Your advise is solid and sorry that you are affected.❤ Giving polite safety concerns is part of being a good and caring person . most adults readily appreciate it , but some will laugh … until they are affected or see it first hand. It’s far easier to ignore , but being affected personally one feels a duty to inform.

@ZippedUpKitz Жыл бұрын

I was going to say, that mold was too deep to do the fast cure resin in the curing machine… it will flash cure on you… I learned that the hard way myself 😊

@knitsewfancy Жыл бұрын

@@garyoverman4393 I got this stuff on my hands before I started using epoxy. Mine is from cleaning supplies and barbering. Some people seem to be able to tolerate chemicals better than others. But once you have it, there is no cure. The best you can do is "manage" it.

@LoriNicolls 10 ай бұрын

Ugh. That happened to me😢 I was fine working with resin for YEARS… literally YEARS. Then I developed horrendous dermatitis that has affected every aspect of my life. I can’t even pull up my own pants without pain. Awful. I wouldn’t wish this on my worst enemy. I have spent hundreds upon hundreds of dollars on bandaids, creams, doctors, dermatologists, more creams, etc. Brutal. Absolutely BRUTAL😒😭

@bonniedavis8746 5 ай бұрын

@elisahiggs5864 Жыл бұрын

That was fun watching. Thanks for sharing your talent

@glitznglitterbymichelle1 Жыл бұрын

Glad you enjoyed it 🤗

@AndreamTipping 6 ай бұрын

Thank you so so much for this I been searching for ages on how they are made. Thank u x

@usherl250 10 ай бұрын

Wow, that’s was a great tutorial, I love how your husband helps you with the extra work at the end, my hubby wines if I ask him to sand something for me, and that seahorse is so cute. Love it

@glitznglitterbymichelle1 10 ай бұрын

He’s pretty good about anything I need help with 🥰

@Duckiesmusings Жыл бұрын

I saw someone use vinyl transfer tape as the bottom of the mold making tray, it holds down the blank very well and neatly....great tutorial!!!

@glitznglitterbymichelle1 Жыл бұрын

That's a great idea!

@JustNikkie_ Жыл бұрын

Amazing tutorial… Thank you so much for sharing.

@mareemiller6762 Жыл бұрын

Thank you so much....I have been trying to make a live edged mold but haven't been successful so hopefully using your tutorial will make a big difference for me.

@sharonwarden3502 6 ай бұрын

Michelle Thanks for all the videos that you do, they are so helpful. 😊

@glitznglitterbymichelle1 6 ай бұрын

You are so welcome!🤗

@louisebernard5780 9 ай бұрын

I think the seahorse is super beautiful!!

@JulzHair Жыл бұрын

Ooooh pretty!

@halilbalaban1056 11 ай бұрын

It was a very smart idea to use crystal molds. I congratulate.

@LostSiren13 Жыл бұрын

Beautiful crystals. ❤. Congrats on the mold making goodies from Let’s Resin. Very cool molds. Glad you show the mistakes. I’m great at mastering mistakes. 🤭

@inthekitchen55 Жыл бұрын

Wow - that is a lot of work. Great Job

@ruthanndeline6931 Жыл бұрын

Thanks so much for sharing this, I have been trying to make my own moulds and this is just what I needed to learn all the ropes.

@glitznglitterbymichelle1 Жыл бұрын

You are so welcome!

@B.L.Creations 6 ай бұрын

Those are awesome !

@irenerhynes6732 Жыл бұрын

Thank you so much Michelle. I have been wanting to try making a geod mold, and now you have shown us how easy it is to do. I in fact bought a few smaller crystals whilst in Cape Town for this. Been home a day, and your tutorial popped up. So anxious to start to do. Wish we had let's Resin here. But we will prevail. With people like you and Don how can we go wrong.

@glitznglitterbymichelle1 Жыл бұрын

You can do it!!! Join my facebook group so we can see your results! 🤗

@miniscenesgb Жыл бұрын

love those moulds. usually crystal points moulds are matte finish - love the shily ones and with the holo behind them - love it!

@glitznglitterbymichelle1 Жыл бұрын

Thanks ☺️

@pamwineinger2374 Жыл бұрын

Awesome! Thank you I was trying to figure out how to do this.

@fuzznickers Жыл бұрын

Yes, silicone reacts to UV resin but I'm glad you were able to fix it. They turned out lovely.

@genevafraser5859 Жыл бұрын

Your molds turned out great Michelle

@glitznglitterbymichelle1 Жыл бұрын

Thanks so much 😊

@marycasasnovas5710 Жыл бұрын

This was super informative…. I’ve been wanting to make my own molds but haven’t just yet. Thanks Michelle!👍🏼

@glitznglitterbymichelle1 Жыл бұрын

You are so welcome!

@maddieadams75 Жыл бұрын

Very nice mold making tutorial ❤ thank you for sharing

@glitznglitterbymichelle1 Жыл бұрын

My pleasure 😊

@DarleneD1026 Жыл бұрын

Awesome video...Thank you!!

@montannalancaster9660 9 ай бұрын

THANK YOU SO MUCH FOR SHARING THIS!❤

@glitznglitterbymichelle1 9 ай бұрын

You are so welcome!

@ccarey9013 Жыл бұрын

Great molds I do have some of the putty and liquid rubber. Just haven't tried it yet. Thank you❤❤❤😊😊😊

@glitznglitterbymichelle1 Жыл бұрын

Definitely try!!

@reginacarpenter-brooks2266 11 ай бұрын

Thank you for sharing. ❤

@beverlyangry4767 11 ай бұрын

Really pretty.

@GlitzyWitch 6 ай бұрын

I absolutely love the crystals you made, especially with the holographic film, it made them look prettier. This was a great inspiration for making moulds, thank you, from one Glitzy Gal to another ✨️✨️✨️ My daughter is 23 too!!! My mum passed recently, she loved to resin, ive inherited 3 massive storage box's full pf resin moulds, and everything to do with the craft. I've tried doing a few things a few years aga, however i think this summer i will have to give it another go woth everything mum left me. Your video's ate helping me woth so much inspiration. Thank you so much ❤😊❤

@glitznglitterbymichelle1 6 ай бұрын

I’m so sorry about your mom, that will make it even more special to use her products! God bless you 😊

@GlitzyWitch 6 ай бұрын

@glitznglitterbymichelle1 Thank you, yes it will. I've just spent a small fortune on mica powders and pigments lol, I hope I can do her proud. Thank you for your inspiration. I can't wait to start 🥰🥰🥰

@elaineprovan4500 Жыл бұрын

Thanks again! Another great tutorial!

@glitznglitterbymichelle1 Жыл бұрын

Glad you liked it! 😃

@babujaan18 Жыл бұрын

Greetings from Mumbai, India. Thank you for this video. Been tossing ideas around in my mind how to make a live edge mold as these are not available in my country and getting one from abroad is not an option as it’ll be at an astronomical cost. So now I can make my own thanks to you.

@glitznglitterbymichelle1 Жыл бұрын

Glad it was helpful! 😊 that’s what I try to do for all those that can’t afford one or have access to one 🤗

@Shazian_Fleur Жыл бұрын

Awesome tutorial!!! Thank you so much!!

@glitznglitterbymichelle1 Жыл бұрын

You are so welcome!

@LisaBale62 10 ай бұрын

That was great😀

@JulzHair Жыл бұрын

Well this is just cool!!!!

@pamcolechadwell1302 Жыл бұрын

I use food containers to make my molds in, like yogurt come in, I also use them to pour my crystal candle in, like the ones Tea And Art made. so gorgeous. .

@glitznglitterbymichelle1 Жыл бұрын

Great idea!

@lynn6799 11 ай бұрын

I found that the containers that Walmart sells chicken salad in, work well for casting silicone molds. They're easy to clean and reuse too.

@JaniceBlake128 Жыл бұрын

Love this video

@glitznglitterbymichelle1 Жыл бұрын

Thanks ☺️

@sheryltrevino7966 Жыл бұрын

Thanks for sharing your process to make these. On your crystal molds you could try spraying with alcohol before pouring the resin. I have seen other artists doing this with mold that it is hard to get bubbles out.

@glitznglitterbymichelle1 Жыл бұрын

Great tip! 😃

@ChesneyAdventures Жыл бұрын

Thank you

@glitznglitterbymichelle1 Жыл бұрын

You're welcome

@ZippedUpKitz Жыл бұрын

I love your sea horse… New subscriber 😊

@glitznglitterbymichelle1 Жыл бұрын

Thanks for subbing! Enjoy the channel!! 🥰

@ilsejansevanrensburg9237 Жыл бұрын

Hi. You asked about how to avoid bubbles in your crystal points. When poyring your resin, do it very slowly. Pour in one spot only. That way the overflow of that spot wil slowly go into the next hole. You can also pour just a little bit and then use a microbrush to remove the bubbles in the points. Thank you for sharing this video. I have been thinking about casting my own mold as well, but I am going to use a waxy type of material that you use to make your master. That material is reusable. You use your heatgun with a quick movement to make that master shiny.

@glitznglitterbymichelle1 Жыл бұрын

Interesting!! I’ve not heard of that kind!!

@lindaripley5240 8 ай бұрын

Michelle, any chance you might do a tutorial on how you make one of the newer molds you are making.

@glitznglitterbymichelle1 8 ай бұрын

There is one already in my channel - look for the stingray

@adelealdridge2080 Жыл бұрын

Been aftet this mould for ages not found it in the uk yet and too expensive to import , but im new to resin and not at mould making level either but love your easy guide to making them

@glitznglitterbymichelle1 Жыл бұрын

It’s not that hard! Give it a go! 😊

@usherl250 10 ай бұрын

On the crystal molds, I always stick my silicone tool in after filling them half away, then I fill the rest of the way.

@wilhat Жыл бұрын

Hi great video I loved the crystals them could be used in making geo painting but this for me to much work.

@glitznglitterbymichelle1 Жыл бұрын

I understand it’s not for everyone 🙂

@mathytv 7 ай бұрын

You are an amazing artist. Thank you for the time you take for make your wonderful 🎉videos. Today is the first time I watched your channel ❤. I am so happy. Sorry. I don’t see if your sale your molds. I will ba so happy to bay you it. Thanks 🙏🏼 🎉😊

@glitznglitterbymichelle1 7 ай бұрын

Thank you so much 😀 I’m glad you found me too!! I have lots of videos for you to binge watch LOL. My eBay link is always in the description box and I’ll put it here as well: www.ebay.com/str/glitznglitterbymichelle?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=acjoyi8kqw-&sssrc=3418065&ssuid=acjoyi8kqw-&widget_ver=artemis&media=COPY

@lizblameuser7552 6 ай бұрын

What a great idea to use the crystal mold for your edges! You truly are brilliant! Thanks so much for helping us along with all,of your great videos!👍❤️

@glitznglitterbymichelle1 6 ай бұрын

You are so welcome!🤗

@Tamerlan_3_131 7 ай бұрын

Волшебство 💯👌🏼

@LostSiren13 Жыл бұрын

I’d be interested in purchasing this mold. ❤ this.

@glitznglitterbymichelle1 Жыл бұрын

Which one the blue or green one?

@LostSiren13 Жыл бұрын

Possibly both.

@glitznglitterbymichelle1 Жыл бұрын

Email me your address and I’ll get you a cost plus shipping. Glitznglittermichelle@gmail.com

@sturkiestercreations 5 ай бұрын

Iike all your tutorials! I've e made some molds in the past and have been wanting to make a square one but make it not exactly square. I'm hoping the crystals I have will work out. I've also got an acrylic sheet to make the puddy one on. Have you tried using an acrylic sheet before ?

@glitznglitterbymichelle1 5 ай бұрын

Not yet

@lindao7887 Жыл бұрын

Fast cure resin Cured too fast in the curing machine right? Mine did too - was wondering if it was just me. Seemed like the machine got way too hot. Anyhow, big project - well done, well taught, thank you!

@mookzmom Жыл бұрын

I was thinking that perhaps the pour was a little deep for the thicker resin. Maybe flash cured? The thicker resins are usually for thinner pours.

@glitznglitterbymichelle1 Жыл бұрын

The curing machine does not always give me good results unfortunately 😞

@lindao7887 Жыл бұрын

was a thin trinket bowl with a thicker lid, but very small

@Kathy-Carr Жыл бұрын

When you are pressing the live edges into the silicone, would it help to spray with the quick release so the edges fuget in and out easily? I hope that made sense. This turned out awesome. Thank you! 👏🏻👏🏻👏🏻

@glitznglitterbymichelle1 Жыл бұрын

I will definitely try next time!

@Kathy-Carr Жыл бұрын

@@glitznglitterbymichelle1 I was only curious….I have never used the mold release and I a, not sure what it’s restrictions are. 🙂

@mkfranklin2179 9 ай бұрын

I have a live edge chunky coaster that I made. Can I use that instead of making the clear one?

@glitznglitterbymichelle1 9 ай бұрын

Yes you can!

@ZippedUpKitz Жыл бұрын

I was going to say, that mold was too deep to do the fast cure resin in the curing machine… it will flash cure on you… I learned that the hard way myself 😊

@glitznglitterbymichelle1 Жыл бұрын

Yep I’m always learning as well 😁

@Ali-H3444 Жыл бұрын

I saw a woman who casted silicone inserts using let's resin silicone and old silicone molds. I believe it was a wine bottle topper mold. I also saw Wanda's blessed Creations try to fix a silicone coaster mold by pouring fresh silicone on the bottom of her coasters and a day later it peeled right out. So in certain circumstances silicone will not stick to silicone. It's just a matter of figuring out how and why. I don't mess with silicone much, I have no need to yet. But it is interesting 🤔

@Ali-H3444 Жыл бұрын

Oh and I wanted to tell you another tip. Toonpish crafts makes inserts by pouring silicone on stamps. I noticed you bought stamps and remembered her video on that. They worked better than the stamps obviously. Have a blessed day sweetie ❤

@dhtarget Жыл бұрын

I want one of those, but don’t want to do all that work to get one. Yours turned out great. Do you know where you can even buy one? I love how your seahorse turned out.

@glitznglitterbymichelle1 Жыл бұрын

The only one I know of that sells them is Julie Cutts in Australia. I know a lot of people can’t afford that one so I wanted to help out those who can’t afford it or don’t have access to mail from over seas.

@dhtarget Жыл бұрын

@@glitznglitterbymichelle1 thank you, I watch Julie too, but your right, they are expensive. I appreciate you showing us how to make our own.

@amandainspain 9 ай бұрын

I should have watched this before I messed up my silicone mold 😮. I have tried to make an inlay. For a tray mold. So I made it directly in the mold thinking it would just come out. It doesn’t! Any help to get it out?🙏

@glitznglitterbymichelle1 9 ай бұрын

Silicone adheres to silicone I don’t think you can save it unfortunately 😑

@pamcolechadwell1302 Жыл бұрын

I love lets resin silicone. I love let's resin everything so far. You still have to poke and babysit any brand of crystal molds to get good bubble free points. trust me, I've fixed a few points. just sand that bad one then coat it with resin. Where you sanded it in spots If you don't clear coat the whole coaster your going to have spots that are not shinny. It takes a long time to make good molds. Trust me there's no bubbles in silicon if you mix it and pour it right. I can't believe y'all using those torches on everything. LOL Yep I see you got bubbles in your new mold where you didn't fix those points that had bubbles. been there done that.

@sarahmallonee Жыл бұрын

I don't understand the way they use torches knowing it's damaging either, glad I'm not alone lol

@jencstephens5452 Жыл бұрын

I have been trying this, and running into issues with the crystals being not as shiny as the top. Any way to do something with the blank to make them have a glass coating before using it to make the silicone mold?

@glitznglitterbymichelle1 Жыл бұрын

Probably would have to get another clear coat on it first before casting it somehow.

@goldieford3353 10 ай бұрын

Will you put the molds in your Ebay store? Would be nice.. thanks Love your videos..❤

@glitznglitterbymichelle1 10 ай бұрын

I don’t sell that at the moment but if I ever do I’ll definitely post them there.

@lailaalkurdi1891 Күн бұрын

From were can i by this selekon

@B.L.Creations 6 ай бұрын

I’m having a problem with my resin setting . So far it’s taking around 48 hours to cure . Is this normal ? Is it important to have it in a cooler or warmer place ?

@glitznglitterbymichelle1 6 ай бұрын

Definitely warm place, even on a heat mat. If it’s still not curing then most likely it was not mixed properly or it was not measured properly 🥴

@Alexandra-qc5wp 5 ай бұрын

Wow, postdated

@lindseybilger7616 9 ай бұрын

Have you noticed any of your older projects starting to yellow with this particular resin?

@glitznglitterbymichelle1 9 ай бұрын

Nope not even one!! Very pleased with it.

@nancylevinson3353 Жыл бұрын

Grow your own crystals with Epsom salt

@glitznglitterbymichelle1 Жыл бұрын

I did with borax! Check out my video on KZfaq 😊

@mamabear619isalpha8 10 ай бұрын

Can grow them with cream of tartar also!

@Muhsinah.Nadeem 8 ай бұрын

Where did you get the “ little crystal molds”?

@glitznglitterbymichelle1 8 ай бұрын

Let’s Resin

@Muhsinah.Nadeem 8 ай бұрын

@@glitznglitterbymichelle1 Thank you

@karendarling7246 Жыл бұрын

Where do you get the iridescent Sheets or whatever called

@glitznglitterbymichelle1 Жыл бұрын

I got them on Temu 😊

@karendarling7246 Жыл бұрын

@@glitznglitterbymichelle1 is that what it's called iridescent paper

@glitznglitterbymichelle1 Жыл бұрын

@@karendarling7246 it says Aurora laser film foil on the order. 20cm

@karendarling7246 Жыл бұрын

@@glitznglitterbymichelle1 thanks is it from tmeu

@glitznglitterbymichelle1 Жыл бұрын

Yep from Temu

@user-tn9np5uk9f 7 ай бұрын

not to be wasting any what I do is use a measuring cup with water pour in molds then you have your amount to use and I write the amount on the back of the molds

@glitznglitterbymichelle1 7 ай бұрын

Yes I do that on 90% of them but sometimes I forget LOL

@lintball8379 Жыл бұрын

UV resin will cause the silicone not to cure properly, unless you let it sit for a week or two. That is probably why it came out dull. The clear silicone from Lets Resin will also be really sticky with UV resin. Platinum type silicones do not like UV Resin

@jencstephens5452 Жыл бұрын

Thanks for solving a mystery you didn't even know I have been struggling with 😊 When trying to make a blank fit to be turned into a silicone mold, perfection is the goal. Sounds like you have done this a few times.... how do you suggest getting unlevel areas to be shiny? Like the crystals around the edge.

@mariahatfield22064 Жыл бұрын

Why not put a piece of silicone texture sheet down instead of more poured silicone?

@glitznglitterbymichelle1 Жыл бұрын

Sure that would probably work to! 😊

@ZippedUpKitz Жыл бұрын

That little cutting tool needs to be sharpened… I use those in my leather working… if you get some string and coat it with some beeswax, you can then strop the blade and it will slice through that silicone like a hot knife on butter :)

@glitznglitterbymichelle1 Жыл бұрын

Interesting I wonder why they don’t give instructions with that blade, it came with the silicone and at first I wasn’t sure what it was 😁

@ZippedUpKitz Жыл бұрын

@@glitznglitterbymichelle1 funny thing is, it’s actually a cuticle cutter! Nail stylists use them to rum cuticles when You get a manicure… the ones that come in those kits are cheap Chinese knockoffs…Mia hate saying that about something from Let's Resin because I absolutely LOVE their resin, mica powders, and color shifting powders but their tools that they have been giving out are really cheaply made… they produced a mini drill a while back that I ended up writing a one star review on Amazon… I had NEVER given a product from Let's Resin anything less than 4-5 stars before… but that drill was a bloody joke! They took a mini drill from another seller, bought a bunch of them, put a nice finger tightening 3 jaw chuck on it, slapped their name on it and then jacked up the price from $9.99 to $19.99!!!! The ONLY difference in the drill was that nice 3 jaw chuck that you can get at any home improvement store for $5.00 or LESS!!! The drill even had the same manufacturing number on it! I just couldn’t believe they did that… but yeah, that little,tool is a really good gadget if you sharpen it up! There is a KZfaq video on how to sharpen those things… you can look up sharpening leather working edgers / bevel tools… you can use a thick piece of string or a thin strip of leather to sharpen it… you can use a polishing compound or beeswax… both work for me. Have a blessed day! I have enjoyed your videos…🙃🙂🙃🙂

@ZippedUpKitz 6 ай бұрын

@@glitznglitterbymichelle1it’s actually a cuticle remover lol… but it’s used to trim silicone and I even use it to trim excess resin instead of a debarring tool… I hate those demurring tools I just can’t get the hang of em with the spinning blade….

@rebeccamoerno8356 Жыл бұрын

Thanks for the tutorial, I have tried, and it was a major failure 😢

@glitznglitterbymichelle1 Жыл бұрын

What happened?

@Alexandra-qc5wp 5 ай бұрын

Is thatca Wisconsin accent

@glitznglitterbymichelle1 5 ай бұрын

lol no, I’m originally from Ohio but moved to Florida in 96’

@mookzmom Жыл бұрын

All sorts of odd things can cause inhibition of curing in liquid silicone. They're finicky.

@pamdeary3354 9 күн бұрын

Directions tell you no fast cure in a curing machine.

@bltigger2644 Жыл бұрын

My son is 30, I just bought Lego beginning set.

@TheRhythmOfLife1972 Жыл бұрын

This was a long video and I fast forwarded to the end as the transcript was not helpful. Can you use Chapter Headings for each step❔

@glitznglitterbymichelle1 Жыл бұрын

I have no idea, I’m pretty sure all that is auto generated because I don’t even add the transcript either. When I release a video it’s voice only. Again, it may be possible as I’m really new at all this and am always learning as well.

@hollylowery26 6 ай бұрын

LOL Who needs instructions, just leave those in the box.😂

@glitznglitterbymichelle1 6 ай бұрын

😁

@amywalls7734 Жыл бұрын

I just have to say I am angry with you. You got me hooked on temu and I’m going to start sending you my bills. 😂okay? Does that sound good! Joking of course but Uhg! I thought Amazon was evil.

@glitznglitterbymichelle1 Жыл бұрын

Hahahaha I was like what!?? Oh no my first bad comment! 😂

@sophiadelbosque4369 4 ай бұрын

You should warn ppl before it starts some ppl have trypophobia! That really creeped me out! Ugh😢

@glitznglitterbymichelle1 4 ай бұрын

I don’t even know what that means 🫤

@LISA-gv5yo 4 ай бұрын

😶😶😶 Sorry...really Sorry, mas.....achei tudo muito rudimentar pra todo o material carissimo que vc tem!

@glitznglitterbymichelle1 4 ай бұрын

No problem 😉

@max3075 11 ай бұрын

This looks terrible its like a second grade fathersday ashtray gift.

@glitznglitterbymichelle1 11 ай бұрын

It’s only a mold to make coasters, it’s not a piece to give away!

@mamabear619isalpha8 10 ай бұрын

Nobody said you have to do it! What you should do though is just be nice or just pass over being negative and rude!🙄🙄

@mamabear619isalpha8 10 ай бұрын

And it's Father's Day, not fathersday! 😂😂

@lynn6799 11 ай бұрын

I learned that if something has small areas in the mold, pour a little resin at a time, squeeze the small tips to push the air out, and after you see the bubble pop at the surface, release the mold. It will help suck the resin into the tiny spots. It takes patience but has paid off for me more than once.

@heidimarcum4631 Жыл бұрын

Wonderful instructions! I love your work! I would also love to buy one of the molds, since I have wanted a live edge mold for a long time but cannot afford the high cost!

@glitznglitterbymichelle1 Жыл бұрын

I have one person in line, if they decide they don’t want them I’ll let you know 👍

@heidimarcum4631 Жыл бұрын

@@glitznglitterbymichelle1 morning! Did you send off your molds to the person in front of me? If not I still would love them! Thanks

@glitznglitterbymichelle1 Жыл бұрын

Yes I did, I’m sorry 😑