You Tubes greatest junk yard engineer/shop teacher. And I never miss a vid. And wishing I was closer to you so we could talk vehicles.

Low Buck Garage and a cup of coffee.

I missed you and this bus so much.

Bus says to new owner, "Thanks for the update and maintenance…..I needed that like a drink of water in the desert". Thanks for the video.

You should build an outhouse at the mine. Nothing better than crapping on your own land in an outhouse. Just leave plenty of moth balls and other snake / critter deterrents and you'll be fine. You should get fancy and build a 2- holer. With a separating wall for group emergencies. It would make a great video. Be sure to put the toilet paper in an old sealed coffee can to keep the mice away like my grandma. Also leave a can of wasp/ bug spray at the ready. It's an adventure your children will remember.

I really love your style and humor. Great video as always!

"And suddenly, there was less pie." That's a brilliant way of saying: "We ate the entire pie and hit the road thereafter".

The good thing about today is a new low buck garage video! The bad thing? Only 17 minutes long! 😭 I'm rewatching young old videos from when I discovered your channel. They always bring a smile to my hoarding face 😁👌🏻

People have shown me how to chase down electrical things before but this made SO much more sense. Thanks!

Those plastic welders can be a lifesaver, I fixed a battery that had a hole in it months ago, and it's still holding strong. Just never use those inside, otherwise a headache is inevitable.

Man, at this point I think I just need to binge your entire channel

4:50 Great explanation of how the dipstick works, with the pickup and the crank weights. Many people add a certain amount of oil and mark the stick based on where the level ends up.

Thanks for another great video. I enjoy seeing you tackle whatever the problem is, whether is mechanical or electrical, or neither.

I would totally live on that property. That would be heaven!

Great entertainment. Fixing problems & getting it done. Never saw a plastic stitcher . Cool😊

Great looking bus man! i AM HAVING FUN WATCHING YOU HAVE FUN.

A new fan from The Philippines. Please upload more. I am almost done binge watching. Very informative, fun and entertaining. Thank you.

We really wish you would create more videos Sir. Love your humor and ingenuity. You should really have many more subscribers!

Just what I needed before starting my day.

Thanks for these wonderful videos they sure do bring me some good peace and education.

I love Pietown. There is a rich history to such a tiny place. It is just so far away from my home.

I found it very satisfying using a plastic welder.😊

Just fantastic to watch all your ongoing sagas and adventures

Great vid! I always enjoy your bus vids (and mine vids too). Holding tanks are usually ABS - just like drainage pipe. If your repair doesn't hold up, you can use ABS cement and some ABS pipe shavings, a piece of pipe or a flat sheet of ABS (ACE H/W) to permanently patch it

Hey man, love your videos. I have adopted your method when working on projects and now when it stops being fun, I move on to something else. It's helped me a lot! Thanks

Got up early and found your new post 👍 That Cummins still runs like new, Dodge was smart to put those in their diesel pickups. Thanks for the post and the education with a sense of humor. Indirectly meeting the family was nice too❤️

Thank you for testing that plastic repair gun, I will probably buy one based on your demonstration. Good fun video, as usual.

Im mostly a tech person, Cars are not my biggest interest. But Ive started enjoying car repair videos for some reason lol. Your channel sort of started my new obsession.

Careful with that oil pan! I've seen cheaply painted pans slough off inside the engine and the paint blocks the oil pickup. Love the bus series!

I really enjoyed this series!

Manual says: "Twist a little after melting wire staple into the plastic" This should contract the cracked lines harder together. Good Video, Love the Bus Shenanigans🤓😍🤓

Deboss Garage showed what happened when a cheap oil pan was put on a 6BT. Just make sure you keep an eye on the oil pressure.

You just keep knockin' 'em outa the park. Another great vid.

This was time well spent with a salt of the earth man.

Good morning from Cape Cod 🐋 I've watched many of your videos and I believe there is absolutely nothing you can't fix. Pie Town? Ohh, I'm pulling in there also 😋 great video as always, keep up the great work 👍✌️🇺🇲

Glad to know you have a favourite putty knife and gasket scraper. Whenever I have to do drywalling or scrape finish off wood, my only choice is Richard brand scrapers. Yellow and green. They just work!

One of these days I'd love to work come out and work together on something. I bet a lot of viewers feel that way. Great work.

I would be afraid I would get back to the mine. And the bud would be gone. You are a brave man

I love this guy What a gem

So glad I found this channel! I have a better understanding of underneath the hood. And you are hilarious.

love your bus and cool stuff! enjoy the summer!

Well done and fun to boot! Doesn't get much better...........

There's only one thing I can't stand worse than getting into my excrement, and that's someone else's, shew James, you're really getting right to the top of my Yuck, list. I hope you don't breathe the smoke fumes from that tank! Just normal oil, no chunks no water, that's refreshing! That bus seems like it's going pretty good, I hope you don't "park" it there too long. That is a mobile family unit, all you have to add is a lake or river and you have instant resort. Nice video James, thank you for getting it up on the net. ben/ michigan

More videos please! Watched them all. Multiple times!

Dear LBG. 👍👌👏 Well done again (video and work). I definitely like your old family bus. 2) It really seems that nowadays absolutely each and everything new is crap respectively at least not as good as older stuff was. 3) Unfortunately your second property seems to be far away from your home/house/workshop. Hope not too far away. As always: Thanks a lot for making teaching explaining recording editing uploading and sharing. Best regards luck and especially health to all of you.

Nice job sir Nice Bus congratulations to you sir show good yard 😃👏👏👏👍👍👍👍

Hi, all your uploads are informative and very much fun. Many thanks from UK.

This is a brilliant channel, you’re a very knowledgeable feller. A++

Watching from the UK .love the channel . Keep doing what you do

Love your videos! So glad to see. Good hearted fun.

Awesome and outstanding content as always.Thanks for sharing and taking us along

Love everything you’ve done on the bus so far. I wish the roof scoop was more like the shape of the bus lines. I know that sometime you will come across a ductwork 90 that has a soft curve which would look like original equipment. This could still be done the Low-Buck way and you wouldn’t lose any respect. That bus looks so comfortable when it’s tripping. Hope it’s fun to drive.

The new property is the place to go! All that room, and stuff everywhere. It's like heaven! A friend of mine told me that there were NGK knock off spark plugs floating around. I wonder if you got a set of them. Apparently, there are a lot of junk auto parts being made that look the same, are cheap, but do not work. You can't tell by looking at it, what is good and what is junk!

I'm lovin' that bus every time I see it.

it's really cool you can fix a whole bus like this, and on your own

"Meat on Fire, electricity later" You've surely got yer priorities straight!

You have so much cool stuff around ❤

When working on cracked plastic, drill holes at each end of the crack to stop it from advancing. Also, when using the hot staples, apply heat, twist the gun slightly in order to draw the two sides of the crack closer together. Then release the trigger for hardening.

Excellent video James :) also glad solved issues on Kenworth Bus also shock on parts don't last like used be !

Awesome video i can't believe that's the bus you dragged out in one video unbelievable the work you put into it great job

I never put antifreeze in the potable water tanks on RV’s. Since the tanks can never be completely drained it takes forever to flush out the bad taste of the antifreeze. Just drain it and leave the valves open. What little water is left will freeze but it won’t hurt anything. I love that old bus!

Nice job with the repairs James 🙂🔧

Very very excited for more mine content, that thing is so rad and i cant wait to see all the cool stuff you got to keep! (hopefully the cool stuff remained)

I think you have rattle snakes in that battery! I love your videos. Anytime someone says Oliver I think of Richard Hammond and his opal

I found this channel a couple of days ago and I gotta give it to you man, you made a guy who has never been a car guy watching your DIY daily. Keep up the amazing work and if you aren’t having fun you’re doing it wrong!

Daaang, those battleship desks you had to move to park the bus, those are really awesome. Just need a coat of paint on each of em. Pity I can't even afford to make you an offer, and I'm in NC besides, so shipping would be atrocious. A pity, I've always loved those things. Borderline indestructible without the use of military grade explosives.

What a glorious beast of a bus.

Knowledge via entertainment-the perfect duo. I'm guessing your wife [and neighbors possibly], haven't watched tv for years-ever a dull moment.

Good job finding the mysterious current drain. If you ever have an intermittent one, here is the easy way find it. Hook your battery to a charger/maintainer and hook a small light bulb between the battery and load. Hang the bulb out somewhere where you can see it as you pass by. When the light is on, you can unhook things, one at a time until the light goes back out. That is most likely what is coming on and killing the battery.

zip ties make a great filler material for plastic welding. Great video!

Dude, so glad to see you post was kinda worried w fires in NM.

Such an inspiring scene in these times.....the American dream is still real...

I’d advise a battery disconnect for every battery in that old rig. Great video.

While I greatly enjoy watching your videos (work fascinates me, I can watch people work for 8 hours a day!), I had a bit of extra joy seeing a Wisconsin (my home state!) Kenworth mud flap on the bus! 😊

Almost certain the pallet jack in front of the Oliver will be rebuilt in a future video. That bus has turned out to be one amazing vehicle for you and family. You are a guy who puzzles me as to the amount of talents you have somehow taught yourself. I found another channel that may entertain your skill sets. I am amazed at how many Canadians are just some of the best in metal fabrication. No link as they may contain a virus so the guys name is Nick and his dad who also a metal master is similar in sound but memories of names are just not in my wheelhouse anymore. That channel name is INNvision Prototypes. Since you enjoy quite a bit of mopar stuff and do fab work.... I think your going to gain some more to those skills your already aware of. I bent and welded different metals in my day of fab and mechanicing so please check this out. Hope the Enino is finally over and our weather will kind of resume some normalcy

I've been using one of those plastic welding guns for a couple months; best way i've found to use them is to let the wire staple melt in about halfway, then give it a little twist before you let off the trigger. That little twist helps imbed the staple actually in plastic with solid not melted plastic on either side. Really seemed to give it more strength. Plus use the "wavy" staple length wise so the wavy staple acts like a stich and you'll have less movement.

What a beautiful bus. I about love it as much as the "2 dollar" jeep.

I always have fun on your channel! Never a dull moment.

I think I have just found my new favourite KZfaq channel. Keep it up please.

I’m always having fun when I’m watching this channel, you had me at Pie Town. 👍🏻

Man your channel is gold.

Huh, never knew there is a tool for that. I used paper clips and soldering iron

Enjoying the return of "The Bus"! It's like having a small motel room at the mine property, only probably not up to the "we'll leave the light on" standards. But the price is right!

Looks like it's time to open an Airbnb up at the mine :)

The "Blow by" on your spark plug is Corona Stain, when the boot does not cover that portion the plug, it gets charged and attracts particles.

This reminds me of a saying I remember from a long time ago…. If your Jeep isn’t leaking, it must be out of fluid! I really enjoy watching you. You are as cheap as me. Everything can be fixed. John from Cape Cod

I use surplus center a lot myself. Great people to work with, and prices are really good

love this channel. cheers from Chile ☕

Trust me sir you are not the only one getting sick and tired of buying new parts and they're broke right out of the box. here within the last year it has really gotten bad 9 out of 10 things I order are bad. I'm really tired of people saying by made in America. here's my response to that .I will gladly use it if you can afford to pay for it I just cannot afford anything hardly American made and therein lies the problem with American made. Truly love your videos looking forward to the next video.

Nothing but fun on this channel....

In Ireland you couldn't leave that bus tractor quad or anything in a deserted area for long it would be trashed or stolen by young adults, lol lucky you.

No I don't feel as bad when I'm hoarding good used parts. I have 5 Acres I don't need to worry too much yet. LOL. Love to see you working on the old stuff and making it work

Just got into bed after a long day at work. Thanks James fir the upload. From South Africa

pietown looks amazing. hnnnnng now I want some pie!

Hell yeah! new video! I've watched and rewatched the old videos so much that I could probably recite them word for word lol

what a experience, love it

Oliver bulldozer shovel should make a pretty good fry pan for evening meals to cook!

Always having fun with you on Sat. morning...

I love your videos, can`t get enough of them and I`ve never been to New Mexico so I`ll try to find the Pie town! Thanks for the video!

what a cool bus! Thanks for the video!