1965 Mustang Convertible Wheelhouse and Quarter Panel Replacement
Рет қаралды 2,505
11 ай бұрынAfter completing installation of the inner Rocker Panel, Torque box, and Floor Pane, I started replacement of the Inner/Outer Wheelhouse and Quarter Panel. I used a mini sander (www.eastwood.com/eastwood-ele...) that I purchased from Eastwood. Their sanding belt worked decent, but not as good as belts I found on Amazon (a.co/d/fZ0187U). These belts lasted much longer.
Please take your time when replacing both pieces, and double check your original measurements. Thanks for watching.
@NattyDaddyDave 3 ай бұрын
Appreciate the tutorials. I'm doing the same on my 66 convertible
@chrisjackson9102 2 ай бұрын
Great video. I have to do this on my 65 convertable.
@torqued7601 2 ай бұрын
Thank You.
@rdmgwinn 3 ай бұрын
Thank you, great information. By the way the link for your prefered belts didn't work. Which ones did you use? Thanks again for the information.
@67Stang 11 ай бұрын
Impressive work sir. Thanks for sharing.
@smackdammit4266 11 ай бұрын
How’s the Chevelle? Another great video by the way..
@torqued7601 11 ай бұрын
All put back together. I've been driving to several Cruise in. Thanks for asking.
Van Houten Builds
Рет қаралды 29 М.
Torqued
Рет қаралды 4,7 М.
Guzzi Fabrication - D.I.Y Auto Restoration
Рет қаралды 6 М.