That car turned out amazing ! Keep up the great work!
@rubenpatterson144610 ай бұрын
What you accomplished in your time frame nobody would complain about I think we all learned a lot thanks no worries
@Must-Stangingarage10 ай бұрын
I was rewatching this on KZfaq on my TV and the lines are awesome and for all you had to do with that fiberglass kit you bought off marketplace it's just amazing you can make it turn out like you do
@MrGonein6010 ай бұрын
Yes sir. It was alot of work
@danielvaughn909310 ай бұрын
Your a very motivated and talented builder! The project looks great.
@MrGonein6010 ай бұрын
Thankyou sir
@ScottHarness110 ай бұрын
Gosh it's amazing the work you do. Car looks incredible.
@MrGonein6010 ай бұрын
Thankyou sir
@dilligaf2827Ай бұрын
Looks good brother. Never give up
@AAhshitsun10 ай бұрын
Always watching and learning
@punkinsgarageandpaint829910 ай бұрын
I you do the side exit exhaust. If you dopiut the heat tape in the exhaust cover and wrap the side pipes. I'm sure you know that just giving you a reminder. I love this build. Thanks for doing it.
@MrGonein6010 ай бұрын
Yes I put side exhuast on every eleanor I build. I didn't cut the hole yet because I'm using a grille instead of a exhuast tip this time. The exhuast pipe will be behind the alluminum grille
@TimeVault110 ай бұрын
Sweeet!!! Sub'd for long time! Thanks for sharing!
@mikerobinette711323 күн бұрын
Good job 👍
@MrGonein6022 күн бұрын
@@mikerobinette7113 thankyou
@andrewslagle1974Ай бұрын
That Mustang looks great you did an awesome job!Your a great body man !
@MrGonein60Ай бұрын
Thankyou. I'm a shade tree body shop but I do try to do a good job regardless. Thankyou for watching
@Must-Stangingarage10 ай бұрын
It's beautiful
@cliffjamerson3107Ай бұрын
Good luck on the rest of the build keep up the great work
@MrGonein60Ай бұрын
I finished it. I show it on one of the other videos. Seems like video is called eleanor mustang build start to finish.
@bradleyakers7938Ай бұрын
buddy its looking sharp!!!!!!
@MrGonein60Ай бұрын
Thanks it turned out great. I actually repainted it pepper gray. It's on 1 of the other videos I believe
@BuchananASalesАй бұрын
SHOT OUT FROM BOAB BUILT ON A BUDGET GREAT CONTENT
@MrGonein60Ай бұрын
Thanks for watching. Glad you enjoyed it.
@georgestpierre848Ай бұрын
Good job came out nice
@MrGonein60Ай бұрын
Thankyou
@mustangrebuilderАй бұрын
2 thumbs up brother
@MrGonein60Ай бұрын
Thankyou so much
@Wooley689Ай бұрын
That job is nothing to sneeze at, I'm impressed.
@MrGonein60Ай бұрын
Thankyou. It's always fun to bring these old cars back to life.
@troy9616Ай бұрын
Looks amazing. Can you share your source for the baseline cadaver car and parts?
@Must-Stangingarage10 ай бұрын
I've been going through your videos on the first 67/68 Bullitt you posted and it was a beauty I'm going coupe back seat like you did what was the material you used where louvers normally go
@lenturtle7954Ай бұрын
Very nice
@MrGonein60Ай бұрын
Thankyou
@guitarman4u4410 ай бұрын
Looks good Flint I wish i had brought mine to you. Joey let it ruin.
@MrGonein6010 ай бұрын
Wish I had bought it from you.
@guitarman4u4410 ай бұрын
@@MrGonein60 Me to. I would have buy it back. I miss it. Lot of memories. All the boys at Ford that helped me build it are gone now. Ill get 1 & bring it to you maybe some day. I want to build 1 like that yellow drag car. Tubbed out blower out the hood coupe.
@606garage410 ай бұрын
You should do a video on correcting gaps. It would be appreciated.
@MrGonein6010 ай бұрын
Yes. Never really thought about that. It is a major ordeal.
@Must-Stangingarage10 ай бұрын
I talked a couple of people into watching I don't know if they subscribed but it was on 67 68 mustangs only and another mustang site they said they never watched you before and they were amazed at all you do
@MrGonein6010 ай бұрын
Thanks every subscriber helps
@ozzyO70010 ай бұрын
Awesome work so far man 👍
@MrGonein6010 ай бұрын
Thanks
@MidnightsFear10 ай бұрын
Looks really good man, was wondering what you was working on been so busy at work to watch anything from you
@MrGonein6010 ай бұрын
Thanks and I bet. That place stays busy but that's a good thing.
@punkinsgarageandpaint829910 ай бұрын
@MrGonein60 have you done many coupe yo fastback conversions? What is a average cost?
@MrGonein6010 ай бұрын
@punkinsgarageandpaint8299 I've done I'm guessing 30+ coupe to fastback conversion if you only buy just the fastback specific parts and use your coupe package tray and rear seat you can get by with only spending around 4k dollars. Real fastback rear interior and the rear upper panel you will spend another 2k easy
@punkinsgarageandpaint829910 ай бұрын
@@MrGonein60 that's not as bad as I thought. Are you on Instagram? I'd like to message you. Or email
@MrGonein6010 ай бұрын
@punkinsgarageandpaint8299 yes. My names Flint higgins. @MrGonein60 also check out my eleanor mustang group on Facebook
@Onemanstrash1Ай бұрын
its just a lot of work , in 91 I painted my 68 as a first year apprenice , I figured about 600 hours over 3 months (after work)
@MrGonein60Ай бұрын
Lots and lots of work
@MrGonein60Ай бұрын
You did good getting your car running. I subscribed to your channel. Hope to see more of the stang.
@joseramos7476Ай бұрын
looks good to me
@MrGonein60Ай бұрын
Thankyou
@Biker4lyfe98210 ай бұрын
Need to get that stuff out of your paint booth and let me get that El Camino
@MrGonein6010 ай бұрын
Not looking like booth will ever get finished
@Biker4lyfe98210 ай бұрын
Smh we need to fix that
@Ricardo_WadeАй бұрын
I don't care about the time line this thing came out killer
@MrGonein60Ай бұрын
Oh yea. It's a good cruiser car. I actually repainted it pepper gray. I showed it 4 or 5 videos back.
@Ricardo_WadeАй бұрын
@MrGonein60 man I have a pretty good bone coupe on my channel I'm rebuilding it's a Cali car with pretty much every option available I'm torn but can't beat the look of a fast back
@MrGonein60Ай бұрын
I honestly like the coupes. However most people like the fastback. I'd suggest build whatever makes you happy at the end of the day. Don't cut it unless your absolutely positive. Maybe buy a cheap rough coupe to build.
@Ricardo_WadeАй бұрын
@MrGonein60 well this coupe was gifted to from my dad only rust was underneath the battery tray wich I replaced the entire panel, I honestly like a fastback over a coupe but will probably run the car as a coupe for a year or two meanwhile accumulate the fastback parts in that time, I don't plan on selling the car at all so could care less about the dollar value or purity of the car, I have a few other projects so wife will probably not be so happy if another car shows up 😂
@staggsrl110 ай бұрын
probably would'nt use that name they have been taking peoples car's for using it looks amazing by the way
@MrGonein6010 ай бұрын
They lost the copyright rights.
@staggsrl110 ай бұрын
@@MrGonein60 good deal
@samuraisaint23608 ай бұрын
Nice “ what would be the market value of this car when your finished with the build “ I seen these go for $80,000 and up to more the $400,000 on the market
@MrGonein608 ай бұрын
I finished the car. The new owner didn't want me making videos of it anymore. Sold 63k
@samuraisaint23608 ай бұрын
@@MrGonein60 nice man” thank you for the replay
@user-lv5rd8fs1d10 ай бұрын
You are doing a very good job ... can you have a Mustang converted or commission it? Greetings René
@MrGonein6010 ай бұрын
I can
@user-lv5rd8fs1d10 ай бұрын
@@MrGonein60 how much would it cost?
@MrGonein6010 ай бұрын
@@user-lv5rd8fs1d all depends on the build. Lots of variables
@user-lv5rd8fs1d10 ай бұрын
@@MrGonein60 Can you do a compilation of how you did the gray Eleanor Mustang?
@user-lv5rd8fs1d10 ай бұрын
@@MrGonein60 I would like to have you build me an Eleanor, but I would need a rough price idea from you? Thank you for your feedback! Greetings René
@jimpuglisi7973Ай бұрын
Awesome job looks great 👍🏻🇺🇸
@MrGonein60Ай бұрын
Yhankyou so much for watching
@Must-Stangingarage7 ай бұрын
Hey Flint do you ever use clecos or should I just self tapers
@MrGonein607 ай бұрын
Self tapers
@Must-Stangingarage7 ай бұрын
@@MrGonein60 thank you
@chrisschroeder38612 ай бұрын
How did you attach the front bumper
@MrGonein602 ай бұрын
The top half has 4 1/4-20 bolts on each side plus green fiberglass filler. The lower nose is attached with green fiberglass filler to the fenders and bolted to the upper panel
@unshippedcase10 ай бұрын
Do you have some contact info?
@jimstansbury6013Ай бұрын
Nason paint is bad neighbor painted his firebird didn’t last but a few years ago.
@MrGonein60Ай бұрын
I used nason sealer and basecoat on the car however the Clear coat was a top shelf Sherwin Williams 4.2 urethane.
@Must-Stangingarage10 ай бұрын
Hey Mr gone 60 when is next video
@MrGonein6010 ай бұрын
Not sure sir
@Must-Stangingarage10 ай бұрын
We know you gotta make a living and you had severe heat plus poor downs of rain flooding your garage it sure set me back as well here in Missouri, good luck to you and I'll keep watching, take care of your health and we got better weather a coming
@brethenkel9168Ай бұрын
A motor trans and rear end will cost you at least 12,500 what about the rest of the car
@MrGonein60Ай бұрын
You did watch the video? I had 500 bucks in the drivetrane
@MrGonein60Ай бұрын
Motor and trans came from 500 dollar foxbody donor car. Plus I build most my own engines and trans
@Must-Stangingarage10 ай бұрын
Did you take the $1000 off you sold the fox body for LOL
@MrGonein6010 ай бұрын
Yes sir
@meachamny15 күн бұрын
Want to sell it?
@MrGonein6015 күн бұрын
@@meachamny already sold it
@jimstansbury6013Ай бұрын
When you said it was over a hundred degrees I knew you had to be in Texas anywhere else you would have been complaining more.
@MrGonein60Ай бұрын
That's a good one. I'm actually in middle tn. Weather has been pretty crazy lately
@suchoi6110 ай бұрын
Don't speak that Name (Eleanor) because its copyright. She can come and take your car . Be careful with that.
@MrGonein6010 ай бұрын
Not anymore. She lost her copyright this past year
@noahclauson7549 ай бұрын
Hey man do you got a fb? Also keep making these videos! Love it