1967 Tonka Gas Turbine Cab Bottom Dump Semi Truck and Trailer Restoration Number 910
Рет қаралды 3,856,701
2 жыл бұрынI Purchased this 1967 Tonka Gas Turbine Cab Bottom Dump Semi Truck on eBay November 8th of 2021 for $73.92 ( $30.21 plus shipping and tax). This truck was in perfect condition for a restoration, the body had extensive rust, it was complete minus the hub caps and white wall tires, and definitely something I had been looking for. At that time I didn't realize that this truck would also turn out to be the most frustrating restoration to date. From the very start it went south. The truck came in with the windshield and plastic broken due to shipping damage. Then while tearing it apart I damaged the four tabs for the inside bottom dump panels, I later figured out the correct way to assemble it. Then during the assembly process I ended up breaking the white interior piece which cut my finger pretty badly, I ended up using UV glue to repair the interior parts well enough to finish the video and I will have to replace it once I get another interior restored for it. Overall I'm happy with how it turned out. However the process of restoring this toy on time for the video this week was definitely a challenge. Thank you for everyone's support! I hope you enjoy this truck more than I have this past two weeks.
Want to send Chip Channel something? Restorable toys, tools, etc..
Donations can be sent to:
USPS
ChipChannel Restorations
PO Box 1178
Grand Island, NE
68803
Need Parts??? Check out Gasoline Alley Toys! Use this discount code for 15% OFF !!!
www.gasolinealleytoys.com/
Discount Code: CHIPCHANNEL15
!!! Additional Vendors below !!!
Extra content on Instagram
/ chipchannelrestorations
Check out my Facebook Page
/ chipchannelrestorations
Watch my Previous Videos Here
1960s Rusty Structo Emergency Rescue Van • 1960s Rusty Structo Em...
1930s Marx Battery Operated ElectroMagnetic Crane • 1930s Marx Battery Ope...
1953 Tonka COE Livestock Semi Truck • 1953 Tonka COE Livesto...
1961 Tonka State Hi Way Department Mobile Crane • 1961 Tonka State Hi Wa...
1960 Tonka Sanitary System Garbage Truck • 1960 Tonka Sanitary Sy...
1962 Tonka Allied Van Lines Moving Semi Truck • 1962 Tonka Allied Van ...
1960s Tonka Green Dozer • 1960's Green Tonka Doz...
1930s Metalcraft Light Up Coca Cola Truck • 1930s Metalcraft Light...
1960s Buddy L Ladder Fire Truck • 1960s Buddy L Ladder F...
1962 Tonka Cement Concrete Truck • 1962 Tonka Cement Truc...
1955 Tonka Green Giant Brand Semi Truck and Trailer • 1955 Tonka Green Giant...
1930s Wyandotte Folding Wing Airplane • 1930s Wyandotte Foldin...
1954 Tonka Mobile Fire Department MFD Ladder Truck • 1954 Tonka Mobile Fire...
1953 Tonka COE Tow Truck • 1953 Tonka COE Tow Tru...
Share this video with this link
• 1967 Tonka Gas Turbine...
Thank you for watching and supporting my Channel! Please like and subscribe!
Products that I use for ChipChannelRestorations
Bondic UV instant cure glue amzn.to/3yb7i9s
Nylon Punch amzn.to/2SGq3OC
Nickel Plating Kit amzn.to/3dhYfcJ
Ultrasonic Cleaner amzn.to/3506TZV
Blasting gun amzn.to/34IBGKl
Blasting Media amzn.to/3lA8lbT
Wet Sand Paper amzn.to/2SJVTKi
Deburring bits amzn.to/2GOyuox
Black Gloves amzn.to/34JREUL
Metal Polish amzn.to/34N7Cx5
Small Cut Off Wheels amzn.to/2GCPxdq
Buffing Wheels amzn.to/33NN34D
Buffing Compound amzn.to/34LfJdF
Lead Test Kit amzn.to/2GMehzF
Paint Stripper amzn.to/30UNGav
Throw away paint brushes amzn.to/3iNLOql
Camera Tripod amzn.to/2FmuGu8
Led back lights amzn.to/3iWMI41
Camera light amzn.to/30VlsMR
Camera light soft boxes amzn.to/2SGDMoF
DSLR Camera amzn.to/34FwCGI
Action Camera amzn.to/34FwCGI
Wireless Camera slider amzn.to/33Ns1mz
As an Amazon Associate I earn from qualifying purchases.
Buy parts from these sources below and ChipChannel can earn a commission as an eBay affiliate associate.
Toy Decals eBay shop - ebay.us/4y915Y
Decals, parts, toys, vintage items
Rivet Tool Link
ebay.us/GWcxu6
ebay.us/nzJmkh
#Restoration
#DIY
#Vintage
@robertlevine2152 2 жыл бұрын
I'll be 70 in August. You brought back wonderful memories of my childhood playing with my Tonka trucks. Thank you very much.
@danielerickson446 2 жыл бұрын
Got one of these Gravel Spreaders for my 7th Birthday. I just turned 63 and still have it and keep it safe.
@user-ru1kz6ch5f 2 жыл бұрын
на это вечно смотреть можно ,работа доведённая до совершенства , вы Мастер ,говорю вам как ювелир реставратор с 20 летним стажем работы) моё почтение
@MrMsCrokodile 2 жыл бұрын
Сам смотрю на эти видео не отрываясь. Могу же и я делать такую работу, но единственной преградой является полное безденежье, и нет возможности купить себе помещение для мастерской со станками и множеством необходимых для работы инструментов.
@elisaalber 2 жыл бұрын
I love watching you restore the Tonka vehicles. It reminds me of the 1970 Tonka Truck with camper I had!
@donaldfinch1411 2 жыл бұрын
Thank you for your posts! I used to think the sandblasting was my favorite...but over time, my favorite has become the metal work; banging everything back into shape and fabricating new parts. Your restores are awesome.
@markpmar0356 Жыл бұрын
I've watched many of your videos and the care and attention you put into your restorations is obvious. It just occurred to me that the "after" photos you include of the finished restoration(s) must conjure memories in the minds of some of your viewers, specific memories of those precious childhood moments when a gift under the Christmas tree or when a birthday gift from thoughtful parents is unwrapped and the Tonka truck is seen for the first time and the joy and elation is felt. These memories and feelings are too soon forgotten and should, instead, be held close and cherished. Childhood should never be underestimated and your work proves it.
@douglasskaalrud6865 3 күн бұрын
First time I’ve seen you have to do things out of order. Lots of respect to you from this airbrush-wielding model railroader for taking the time and effort to disassemble the trailer to properly do the inside of the ends and for all the gut-wrenching soul-destroying sanding and tacking you do. Who knows-maybe there’s enough of a charge to pull enough yellow through the holes to cover inside for the next restorer a thousand years from now to find.
@tatiannazutania7751 2 жыл бұрын
It's always a great Sunday when I can watch a Chip Channel new video. No one, IMO, compares to your quality of restoration, and videos. GREAT JOB!!!!
@lisapino6739 2 жыл бұрын
Wow! This was definitely a rust bucket. You brought it back to life. I'm sure that it looks better now than the original. You are such a spectacular restorer. Your detail is spot on. Beaker is really a beautiful kitty.
@Zone_Tan 2 жыл бұрын
Sandblasting is so satisfying to watch.
@ChipChannelRestorations 2 жыл бұрын
Totally agreed deathsbane!
@hasonmostafa1571 2 ай бұрын
❤
@aysekucukbozkurt5377 2 ай бұрын
Qp@@ChipChannelRestorations
@p40f20 2 жыл бұрын
I always look forward to your restoration videos of these classic old toy vehicles. This one was no disappointment. You go the extra mile to make each restoration turn out to make the toy look better than new. I have been a subscriber now for about two years. It has been interesting to see how your techniques have evolved over time. You keep figuring out new and better ways to get the job done! I have to admit that when you first displayed this particular truck, I thought it would not be a terribly difficult one for you to do. It did present you with some challenges, but you still were able to overcome them and produce yet another masterpiece. It was so amusing when you came to focus on the original whitewalls for the tires. You flashed up on the screen that they were "rough." Rough did not even begin to address the condition of those original whitewalls! Keep on restoring and putting these videos up! There are several imitators who also put up videos here on KZfaq, but none of them produce the spectacular results that you do. For me, you are the king of the restorers!
@xzytqweo3538 2 жыл бұрын
You can tell that it was a well loved toy and spent many days outside in the dirt beside where ever it ended up being before found and sold to you. I am sure that it is just like Christmas when you find a Gem like that and then again once all the restoration is done and you are at the time of reassembling. Great job. Appreciate you sharing.
@ChipChannelRestorations 2 жыл бұрын
Thanks xyzt qweo! I love when I find really beat up old toys, definitely makes my day!
@only257 2 жыл бұрын
@@ChipChannelRestorations coolest 😎
@flyingscotsmanfan123roblox3 2 жыл бұрын
@@ChipChannelRestorations how and where do you get all of those Tonka vehicles? Btw I love how you restore them keep up the good work 👍
@ayanbhattacharyya9617 2 жыл бұрын
thank you for commenting this . I want to know more about you guys
@karmokaasik7909 2 жыл бұрын
E
@user-hx3rt7qc7n 2 жыл бұрын
Какая сложнейшая работа, столько деталей, поломок, замен. И модель очень редкая. У нас, в СССР, таких игрушечных машин и впомине не было... Chip, Вы как всегда на высоте! 👍✨👏 А Ваш смайлик во время очистки, каждый раз вызывает улыбку, как будто вижу Вас вживую. С нетерпением жду следующий выпуск. 🎄❄️🕊️ Привет из Санкт-Петербурга! 👋
@georgeshelton6281 2 жыл бұрын
What kind of dump truck this is, is this a garden soil dump truck? Peat moss is best recommended top soil; is what I suggest that you use, for your garden plants. 🪴 🌿 🪴
@user-ft8lm4ce5c 2 жыл бұрын
Так-то всё круто, но хорошо когда есть замена, и я сейчас не о декалях, а о пластике кабины и о белых дисках.
@user-hm7tj7rm8z 2 жыл бұрын
Есть такой эвакуатор. Сейчас мой сын ишрается
@mikenorris4966 2 жыл бұрын
You are truly an artist, I do this on a much smaller scale and know first hand how tedious and frustrating it can be. But the results always seem to make it worth while. Thanks for your videos, I have picked up a number of tips and ideas, really appreciate the extreme dedication you have to perfection.
@paulparker1360 2 жыл бұрын
I love your restorations. Yes, there are other KZfaq channels that do similar things but you are the best. There's something so wonderfully satisfying watching you do all that work and, seeing the incredible results afterwards.
@joallawestervelt6918 2 жыл бұрын
That was an awesome restoration. You did an incredible job Chip. The rig looks incredible. I really enjoy your videos. Thank you for putting them out there for us.
@jamesalinio5277 2 жыл бұрын
I have watched almost every one of your videos and today my step dad watched this one with me, both of us were impressed with the all the hard hand work involved with the straightening of the metal, dad absolutely loved the powder painting and the way it came out great lol, and at the end, he said the before and after shots were not the same truck lol he thought it was two different trucks lol, he asked why you didn't paint the truck frame, fuel tank, fifth wheel and trailer sub frame in black, ( Dad is a retired truck driver) I told him that is the way it came from the Tonka factory, all in all, my dad approves of the new look, and throughout the video he kept talking about the toys he had when he was a kid way back when, Dad is 83 and he has advanced Alzheimer's with a bit of dementia and keeping him going is a ongoing challenge, thanks for sharing Chip Channel and we're looking forward to your next video
@unkjason 2 жыл бұрын
As a truck driver myself. I was thinking the same thing, about the fifth wheel
@konrad2460 2 жыл бұрын
You are a professional restaurateur 👍👍👍
@ChipChannelRestorations 2 жыл бұрын
Thank you Konrad! Have a great Sunday!
@lizcrawford2663 4 ай бұрын
What a cute lil spider! I'm surprised how long it stayed hidden while you were taking apart the truck! Thanks for the video, it's relaxing to watch you fix up these old toys
@Fergie74 2 жыл бұрын
I really enjoy watching your videos-no background music. Just the sound of you working your magic.
@annettemalaski1967 2 жыл бұрын
That poor rig needed "metal clearsil", and it did wonders! It really needed two coats of primer. Love that coat of yellow! I like the fact that you don't waste effort and know when to get new pieces! Now your sheep can open thier own construction company!
@ChipChannelRestorations 2 жыл бұрын
Ha, yup, cleared it right up! haha Those sheep are going to have a huge business pretty soon. Thanks again for watching Annette Malaski!
@jeffclark2725 2 жыл бұрын
@@ChipChannelRestorations That project was huge, with welding and JB weld filler,That works well with the powder, polishing the windshield,lots of labor
@Trapper50cal 2 жыл бұрын
Except that one cyclops sheep....horrible depth perception.
@MrBurundoy Жыл бұрын
@@ChipChannelRestorations llllllllllllllllllllllllllllllllllll
@MrBurundoy Жыл бұрын
@@ChipChannelRestorations l
@Inferno67234 Жыл бұрын
I love watching your videos and how you restore things and bring them back to life. Interesting on how they got in such a state in the first place.
@F.U.youcanthandletruth 2 жыл бұрын
Rebuilding memories bro. Took me back 40 plus years now. Thank you for uploading. Memory lane looked the same as ever.
@ruthmtumolo9613 2 жыл бұрын
All I can say is WOW!!! Just another incredible restoration. From the master Chip!
@ChipChannelRestorations 2 жыл бұрын
Thanks again Ruth M Tumolo!
@scottbrown2352 2 жыл бұрын
I recently spent quite a bit of time in hospital lately and these videos really helped to take my mind off things. Truly great work and I really enjoy watching all of them. Keep up the amazing work my friend 👍🏼
@billmulholland4140 2 жыл бұрын
Good morning Chip! Thanks for the video. Have a great day! 🍻👍
@ChipChannelRestorations 2 жыл бұрын
Good morning! Thanks for sticking with my channel! Have a great day Bill Mulholland!
@billmulholland4140 2 жыл бұрын
@@ChipChannelRestorations always bud 👍👍
@gigiking184 2 жыл бұрын
I simply can't tell you how much I've enjoyed watching this I'm hooked on these things now ,but this one this one was stupendous!!!😁👍🏻
@quinco7777 2 жыл бұрын
This restore was awesome! Arguably your best one yet ( that I have sent anyways). Love to see old toy cars, trucks, etc. Being restored to new. Brings back many great memories. Thanks so much for doing these restorations.
@ChipChannelRestorations 2 жыл бұрын
Thank you soo much Colleen Quinlan!
@hevelyncipriano6140 2 жыл бұрын
srddg gus jf ollo
@weskone788 2 жыл бұрын
@@ChipChannelRestorations s as
@herb2968 2 жыл бұрын
an impressive assortment of tools and equipment, and the skills to use them. TWO thumbs up!
@rickkearn7100 2 жыл бұрын
Masterful, methodical, mapped-out and executed with high skill and vision. CCR is the premiere channel of this genre in my humble opinion. Cheers.
@ultimatewitcherfan6677 7 ай бұрын
Wow… A Tonka Bottom Dump! Judging by the amount of rust on that thing, it must have been sitting outside in someone’s yard for a long time before you ended up getting it and restoring it. You made it look like it was just assembled in the factory! Nice job!
@johnporter6263 2 жыл бұрын
You always do such nice work! I enjoy watching the restoration process as well as Beaker welcoming each item to the collection.
@justrelaxing1501 Жыл бұрын
Fantastic video, every time I watch your restorations, it brings me back to playing with the Tonka trucks at full speed on our driveway. Great life, great fun.
@donaldswink6259 2 жыл бұрын
Absolutely beautiful, looks like a brand new truck like you just bought from a toy store.
@edwardhoyenski68 2 жыл бұрын
You almost lost me with the extended cameo of the nightmare with 8 legs, but after I opened my eyes, I watched you make magic. And it is magic. Not only do you turn rust into a wonderful toy, but you bring back memories of childhood. I never had many of these toys, but I had a truck and it's trailer that I loved. Still have the truck some 40+ years later. And, of course, LONG LIVE THE CYCLOPEEP! Thank you!
@YouuuMaddddBroooo 2 жыл бұрын
I love drinking my Sunday morning coffee and watching your videos=) Thanks!!
@ChipChannelRestorations 2 жыл бұрын
Good morning Joey Richardson! Thank you soo much for the continued support!
@mleeriley3977 2 жыл бұрын
These have got to be some of the most relaxing and satisfying videos I have ever seen!.. You are an artist!
@altoncarlson8801 2 жыл бұрын
Outstanding. Looks just like it did when my brother got one for Christmas in 1969
@nordicson2835 2 жыл бұрын
Toys back then were big and tough , thank you for bringing them back to life , the good life.
@shembaxter7982 2 жыл бұрын
Super awesome! I love the sand blasting the most, I could watch that for hours.
@mikecomerford1986 2 жыл бұрын
Always knocking it out of the park ! Its so satisfying watching you take a rusty crusty Tonka truck and turning it into a beautiful toy
@alanpope179 2 жыл бұрын
I had the same truck! I let a friend play with it....... he left it out in the driveway and his dad ran over the cab crushing it! Dad offered to replace it but instead he gave me his son's damaged Tonka mixer with the promise he would make a tandem tractor out of it....... he did and he helped me sand off the yellow painted trailer and paint it red like the converted tractor! I had the only Turbine cab tandem axle bottom dump in local existence! 1970 Los Angeles CA!
@GatchamanG4 2 жыл бұрын
I'm a 52yr. Old guy. I remember as a kid I had a few of the of mostly Metal Tonka Trucks. I wish I still had them. 😔 As always outstanding!! I'm sure this looks better now than when it was first made.
@user-jp4ur9jd8b 4 ай бұрын
I son had a 5th wheeler with the camper, don’t recall if it was a Tonga. But all3 of my son’s did have Tonga trucks and cars to play with when younger. Thank you for restoring these munched loved toys.
@larannar123 2 жыл бұрын
Beautiful transformation!! What a work of love and appreciation!! You killed it,one of your best pieces!!!
@8484terry 2 жыл бұрын
What amazes me besides your Steller skills is that there is a product and a tool for everything, really enjoy your videos!
@renees766 2 жыл бұрын
I was really looking forward to you filling the dump tank with sand and then dumping it.... that would've been so satisfactory!
@nofiltermamma 2 жыл бұрын
Fantastic! Absolutely loved the sandblasting parts. I find it soothing but at the same time can’t wait to what is under all that rust. Are there holes and if so how big or how much filler to use. While watching I have often said in my head….missed a spot! 😊 Thank you for leaving in that much sandblasting. Have a great day. Cheers!😊🇨🇦
@teee4532 2 жыл бұрын
Awesome restoration job Chip! The Bottom dump looks amazing!! I love watching your videos
@ChipChannelRestorations 2 жыл бұрын
Glad you like them T Eee! Thanks soo much for watching!
@Dutchamp Жыл бұрын
As a young kid I played with Tonka all other toys distroyed but Tonka last every one of them. There was a commercial about an elephant could stand on your toys and even that it servived. 😂🐘 Nice restauration worth it.
@robertwilson33 2 жыл бұрын
Love the bright yellow and black colour scheme.I could understand why you assembled this Tonka truck prior to final yellow and black powder coating.Your attention to detail shows in how you restore this beauty.👍🙏
@ElwoodFarmGoats 2 жыл бұрын
The UV process gets me every time with how good they come out after. Another great restoration. Keep up the great content.
@lorettataylor3374 2 жыл бұрын
Wow,that was a rough one. Awesome job.❤️
@ChipChannelRestorations 2 жыл бұрын
Thanks again Loretta Taylor!! 🤗
@user-vx2pp6ul9i 2 жыл бұрын
Готовы
@BigMax- 2 жыл бұрын
There are some channels on KZfaq that deal with fake restoration. But on this channel they really restore toys. Great job
@bettthompson4733 Жыл бұрын
Chip,that was an extra big one today. At lest it didn’t have too many things to replace no big dents. I really enjoy my time with you😊. Take care and God bless you
@carlpenney901 2 жыл бұрын
Its amazing that you take a old toy and make it brand new good on you. I did notice your table grinder tool rest have a gap more than 1/8 not a good idea, I lost a quarter of my thumb because of that. Looking forward for more videos be safe Cheers.
@adiktadoalamusika Жыл бұрын
ouch that sounded painful
@derreth 2 жыл бұрын
I love your restorations. My boys had Tonka toys when they were young. They were very well made out of quality materials. I wonder how many of todays toys will still be around in fifty years time and be be worth restoring? It's great that you can still get parts. Thanks for your very interesting videos and I love Breaker.
@glennoliphint8691 2 жыл бұрын
That's when everything was made in the U.S.A. and then greed came in and they had stuff made in China,Mexico and every country where they pay their workers next to nothing! And so these pieces of crap greedy individuals pay other countries next to nothing and have it shipped to United States and sale it for more than it's worth and then people wonder why there's no jobs in the states?
@amir_alexpro8513 Жыл бұрын
Gehe
@deplorable_2024 2 жыл бұрын
Probably one of the more complicated disassemblies/assemblies I’ve watched you do.
@1500cubiccentimeters 2 жыл бұрын
I have an old 1960s Tonka steamroller I found in a junk pile of trash my neighbors were throwing away when they cleaned out their garage years ago. Its a pretty basic Tonka toy, and its not too rusty, but its missing the steering wheel and at some point in its life someone used a green sharpie all over the yellow parts. I would like to send it to you and have it restored, and since I dont have much money due to being 18 and jobless, I will pay you by letting you keep the steamroller. I hope that if I send it that you will enjoy restoring it as much as a kid would have enjoyed playing with it back in the day.
@TheHamadanners 2 жыл бұрын
The spider was my favorite part what a fine looking critter. The tractor looks amazing
@ChipChannelRestorations 2 жыл бұрын
Nice looking spider for sure! Thanks soo much Hamadanners!
@geo2cv868 2 жыл бұрын
The before/after is really impressive
@ChipChannelRestorations 2 жыл бұрын
Glad you enjoyed it Geo2cv!! Thanks for watching!
@seamanarts 2 жыл бұрын
@@ChipChannelRestorations why did you change the cab?
@garygotthardt8577 Жыл бұрын
Grt8 job Chip ... Wow that yellow really pops makes me want to play in the dirt under my childhood home's porch ... thx 4 the memories.
@douglasskaalrud6865 5 күн бұрын
Beaker tolerates your affection pretty well.
@andrewcormier529 2 жыл бұрын
Just amazing work..truly an artist,I would not have the patients but the end results are spectacular 👌
@antoinettemcquinney4637 2 жыл бұрын
We love watching your videos! Looking forward to many more!
@ChipChannelRestorations 2 жыл бұрын
Thanks so much Antoinette McQuinney!
@procrastinator9 2 жыл бұрын
I remember when Tonka Trucks were made in Minnesota and we got to go to the factory for a field trip. They gave each student a small Tonka truck as a parting gift. Being a GenXer has some value.
@douglasskaalrud6865 Ай бұрын
I work in Minnetonka, MN, just down the road from where Tonka toys were made. Besides my company, there’s still a fair amount of manufacturing going on in the area and all of it produces high-quality products. Must be something in the water around there.
@douglasskaalrud6865 Ай бұрын
Most toys have some basis in reality but I have to wonder if ever there was a turbine semi-tractor.
@hollyhal1254 2 жыл бұрын
I love the sheep, especially the little one with one big eye!
@CoolAgainRestoration 2 жыл бұрын
Beautiful job 👌
@georgeshelton6281 2 жыл бұрын
Would I dare say that I still like 6 wheeled Winnebagos much better? I was thinking of it would be great, if I ever owned one of those vehicles.
@dang6369 Жыл бұрын
I really enjoyed watching this restoration, some seriously outstanding work here. Thank you for posting this!
@frankierzucekjr 2 жыл бұрын
This one is one of my favorites, besides the Green Giant. Nothing brings back more memories then the Tonka Yellow. Well done
@ginadisbrow9324 2 жыл бұрын
Beautiful! The sheep climbing all over the heap, especially the one with the hat, adds just the right touch!👍😂
@hellsbelle59 2 жыл бұрын
Love watching your channel! Amazing restoration! I always look forward to your next video...quite relaxing too! 🚙🚛🚑😊
@ChipChannelRestorations 2 жыл бұрын
Thank you very much hellsbelle59!
@ogeday-14 2 жыл бұрын
Great work 👍🏻
@ChipChannelRestorations 2 жыл бұрын
Thank you so much Oktay Dugen! 😀
@Vickie-Bligh 2 жыл бұрын
Nicely done. I love your collection, and as you pan over it, I find myself looking for my favorites. Keep up the wonderful work. And thanks for sharing Beaker with us all.
@islamjawaher217 Жыл бұрын
The 2nd dose of sandblasting at 49+ was a real treat. Many thanks.
@pegasuz71 2 жыл бұрын
This time you outdid yourself! Amazing restoration, your work is magic, I know it takes hours of long and hard work (and injuries too) but anyway it feels like magic! Excellent!
@kungfuchimp5788 2 жыл бұрын
Loooove the long format Sunday morning episodes. This is pure art. Great work man.
@rayshutsa6690 2 жыл бұрын
All the tonka toys bring back so many memories. The restoration you do is awesome they look like new. Thank you for the memories and the restoration video's. 😀🇨🇦
@erichood5116 3 ай бұрын
This has alot of sandblasting and i love it! You should make a compliation video of just the sandblasting parts of a bunch of your resto vids.
@RepairRestore 2 жыл бұрын
Beautiful job as always Chip!
@ChipChannelRestorations 2 жыл бұрын
Thank you soo much Earl's Repair & Restore! Really enjoyed that Nylint Bronco you just restored!
@AkumaHado 2 жыл бұрын
The longer the video,the more it is satisfying
@ChipChannelRestorations 2 жыл бұрын
Thanks Artorias of the Abyss!! I always worry about the video length, I'm getting more comfortable with the longer videos, People can then skip through what they want to. Thanks again for watching!
@AkumaHado 2 жыл бұрын
@@ChipChannelRestorations Always here to watch your videos 😁
@ezekielmoorejr3145 Жыл бұрын
I had that very same truck as well, but I don't remember what happened to it except that it brought me years of enjoyment.
@debraamond4346 2 жыл бұрын
Your talents are mesmerizing, you refrain from saying a word but I find myself glued to watching. You are amazing, only thing that would make it better is if I could place my adoration to a face. Thank you
@celestelackay5512 2 жыл бұрын
Absolutely amazing! Spectacular! Stupendous!
@ChipChannelRestorations 2 жыл бұрын
Many thanks Celeste Lackay!
@Nillis76 2 жыл бұрын
DEN VAR BRA
@robertkreiling1746 2 жыл бұрын
Awesome job !!!!!!
@ChipChannelRestorations 2 жыл бұрын
Thanks again Robert Kreiling!
@donparker8246 2 жыл бұрын
This was nothing short of incredible. Beautiful paint and bright work. 😳👍😁
@gb1872 2 жыл бұрын
Love sitting mesmerised to your restoration work. Like the info to say what you're actually doing. I wouldn't have a clue how to do this! These old toys deserve a second chance,! Keep the videos coming!
@Austeration 2 жыл бұрын
That was a big project. I think your going to need a bigger tow truck. What media are you using in your sand blaster and how do you get such clear and amazing shots ? Your work is always amazing with fantastic results. Well done
@kjamison5951 2 жыл бұрын
That was a very complicated disassembly, repair and reassembly before heading to the paint shop! Superb skills and great editing. Great result! Do you think Beaker might be angling for a pay rise? Maybe she would like more treats?
@maudwelford7919 2 жыл бұрын
A ‘marathon’ soooo well done! Fabulous! 👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧
@jamesz2436 Жыл бұрын
You are so obsessed with TONKA!!
@r-prorestoration9570 2 жыл бұрын
Impressive restoration mate !
@ChipChannelRestorations 2 жыл бұрын
Many thanks R-Pro Restoration! Your hanging lamp turned out nice!
@r-prorestoration9570 2 жыл бұрын
@@ChipChannelRestorations Thank you !
@r-prorestoration9570 2 жыл бұрын
@@ChipChannelRestorations I'm starting now and I have something to improve.
@dave3156 2 жыл бұрын
Another excellent job Chip--I look forward to your new ones coming out. Nice addition to your collection despite the probs and injury. Was surprised to see you starting to assemble before final pain, but some of it would have destroyed the paint job putting it back together. Looks great thanks for sharing. How many actual hours do you think you had in this one? Thx!!
@ChipChannelRestorations 2 жыл бұрын
Thanks again rcr29! I have somewhere between 32-40 hours into this one.
@gersonmorales7029 2 жыл бұрын
Great job brother!
@kerrypatton4975 2 жыл бұрын
Bravo! Bravo, Sir!! Beautiful restoration. Perhaps my favorite of your work! Well done, and thank you!
@NesuProps 2 жыл бұрын
This Kiwami Japan vibes gets me a new like for this channel, asmr, nice takes and bizzarre sheeps on the picture. This is gold
@yajasiasabadon4698 2 жыл бұрын
Muy hermoso tu trabajo 👍
@ChipChannelRestorations 2 жыл бұрын
Thank you!
@Farm_fab 2 жыл бұрын
An idea you might try so that you don't need to "crimp" the axle support might be to put a piece of plastic tubing over the pivot. Tubing like this might be available from those little balloons at the che checkout at your dollar type stores. These balloons are very small, and don't have helium in them. Another source for plastic tube would be a shoe store as these are used inside the shoes to keep the shape.
@ChipChannelRestorations 2 жыл бұрын
Awesome idea Bryant Fry! I'm going to try this! Thanks soo much for watching!
@patrickdevries4877 2 жыл бұрын
heat shrink would work to i guess
@sadmonkey9060 2 жыл бұрын
Lnbjjjjb. Ya just here m bhmmmo Be iv ok N
@user-fn1sg1mk4c Жыл бұрын
Mhlllja¹ 1 M2ieiek2ws
@user-fn1sg1mk4c Жыл бұрын
9
@johnwilliams1223 2 жыл бұрын
I imagine your massive collection took many years to amass? It’s truly magnificent to see. 😳
@user-xk8hm8kh2b 2 жыл бұрын
Once they played with these toys, then they grew up, the toy was forgotten ... And now they give it a new life! Nice to see a master at work! Good luck to you! Greetings from Siberia, there are your viewers here too :)
@micka6577 2 жыл бұрын
Bro, that freshly blasted metal looks like my face when I was a teenage. Brings back memories but for the wrong reasons. Love it, I so enjoy your channel. Chip Channel👆👆Subscribed👍
@ChipChannelRestorations 2 жыл бұрын
LOL! you and me both buddy haha Thanks again Malcolm Anderson!
@ketnipanadee5727 2 жыл бұрын
ลบฃ
@neerajpal3424 2 жыл бұрын
Ye
SOFIADELMONSTRO
Рет қаралды 28 МЛН
Chip Channel Restorations
Рет қаралды 4 МЛН
RESTORATION KAMASUTRA
Рет қаралды 1,5 МЛН
Chip Channel Restorations
Рет қаралды 1,4 МЛН
Chip Channel Restorations
Рет қаралды 2,9 МЛН