If you want them the STL files from Tinkercad can be found here www.tinkercad....
Пікірлер: 295
@gydo1942 Жыл бұрын
For moving the ball up and down to change the ratio automatically, you can look into "flyball governors" as used in steam engines. They use centrifugal force to fling weights outwards, which in turn pulls on a linkage which controls the engine throttle (or the ball in your case). If set up correctly, this forms a feedback loop. Windmill speeds up, weights fling out, ball is moved to keep the ratio constant. Interesting concept, keep up the good work Robert!
@joejansen7029 Жыл бұрын
I thought the same thing. I saw them in use on hydro-electric generators to maintain speed with differing water pressures. Instead of a throttle, they changed to angle of the inlet gates (or something similar. It was a while back).
@pelton242 Жыл бұрын
@@joejansen7029 In hydro electric its wasn't for the changing water pressure but for the changing electrical load on the turbine that might cause the generator to speed up or slow down. Well spotted though :)
@briana3467 Жыл бұрын
They used the same system in grist mills,both hydro and wind powered at least as far back as the 1800's.
@evan010101 Жыл бұрын
@@joejansen7029 that is correct, in high head turbines the governor operates a “spear valve” to adjust the flow of water so that the output from the generator stays close to its rating, or a level chosen by the operator.
@jeremybrown8263 Жыл бұрын
I think that's where the term "balls to the wall" came from lol
@davidl.howser9707 Жыл бұрын
I was having lunch in the USA today while my Subaru CVT was serviced, and thought what a wonderful solution CVT drive would be for wind generation. I was thinking of a spinning cone drive as a simple solution. Then just now, Robert, your CVT video was in my and today's KZfaq notifications. Our minds must be linked up all the way across the pond. : )
@glynluff2595 Жыл бұрын
In 1958 my first industrial history lesson at age of 12 years was a variable twin cone and belt transmission as used in early Victorian windmills in Britain. The point was that the mill stones would have a constant speed thus reducing the high liability of fire in the flour laden atmosphere which was explosive under certain conditions. Shortly afterwards Daffodil in the sixties marketed the Daffodil variomatic transmission. When I commented on this to my toolmaking uncle he showed me his Robin Hood lathe which worked by a similar transmission and was designed in WWII as a raining machine for workshop machinists. I still use this machine today for hobby processes! As the Presenter suggests there is merely the upgrading of old ideas!
@evan010101 Жыл бұрын
Nice video! Some wind turbines achieve speed matching through variable pitch blade hubs, but usually these days a variable frequency converter is used between the generator and the (fixed speed) grid, so that the mechanical complexity up in the nacelle is minimised!
@Charlie-Oooooo Жыл бұрын
This was such a well presented history and explanation of transmissions! Your videos are always great and very enjoyable but this one just seemed even more so! *Thank* you Robert! PS - I hope we'll get some nice historical/technical travel videos (near or far) this summer. Cheers!
@cymacymulacra2301 Жыл бұрын
No mention of the D-Drive? VRT Innovations. Sounds a lot more interesting than any of those mentioned!
@Charlie-Oooooo Жыл бұрын
@@cymacymulacra2301 who manufactures it or what system is it used in?
@pattayaguideorg Жыл бұрын
Good job mate, came to the same conclusion several years ago after realizing just how good the variable transmission on my motor bike actually is and how well matched it would be for wind generation, I can vouch after doing 150,000 km that I've never had a problem, never had to adjust anything, the only change I made was putting lighter rollers in for faster start speeds and higher torque ratio's up hills.
@friedrichvonsnatch3501 Жыл бұрын
What bike do you have?
@pattayaguideorg Жыл бұрын
@@friedrichvonsnatch3501 A small 110 cc scooter, don't sound impressive, but 150,000 km's says otherwise lol
@jaymzgaetz20066 ай бұрын
The most efficient, durable, and elegant designs have a healthy dose of simplicity. Ruthlessly hack away the unimportant.
@isaacadams557010 ай бұрын
I watch your videos all the time and have learned so much from you. Thank you and please keep making the great videos.
@IAM0973D3 Жыл бұрын
Bloody Awesome; love new and using old tech.
@jawatazi5054 Жыл бұрын
My projects are over flowing out my garage from watching your channel
@ThinkingandTinkering Жыл бұрын
lol - oops my bad! lol
@TyrianHaze Жыл бұрын
Another enjoyable and educational video as always. Thank you very much for your hard work Mr. Robert Murray-Smith. You are a gentleman and a scholar.
@solomonheppner5 ай бұрын
You have no idea how frustrating it was trying to find any information on this through a browser. Thank you so much for uploading this video.
@trevorgoddard2278 Жыл бұрын
I also have considered the problem of wind turbine CVT and came up with my own idea using a variant of the disc system. Using a keyed shaft attached directly to the turbine, a classic spinning ball governor to pull an omni or mecanum wheel up and down the keyed shaft and take the output from the spinning disc, thus providing a purely mechanical control system. Admittedly the output speed would probably not be completely constant, but I have always lived by the KISS principal.
@cymacymulacra2301 Жыл бұрын
Ever heard of VRT Innovations? The D-Drive?
@gj7685 Жыл бұрын
I remember this from DAF cars. Great idea.
@MRunar007 Жыл бұрын
@@rocklover7437 i had one of those for years, ran like a dream, the revers was as fast as forward .. lol
@gj7685 Жыл бұрын
@@rocklover7437 yes they did and used the daf system for short period , my brother in law had one 👍
@MRunar007 Жыл бұрын
@@gj7685 the reason they put it in the 340 series was that they had a huge amount of surplus in stock after the merging with DAF
@gj7685 Жыл бұрын
@@MRunar007 you'd think with modern tech some could revive the idea but then again we'll be going all electric although there's still hydrogen cars 😄
@josephdupont7 ай бұрын
Thank you for the clarification. DAF is a Dutch automobile company that has a rich history in the automotive industry. One of the earliest and most well-known economy cars produced by DAF was the DAF 600, which was introduced in the late 1950s. The DAF 600 was a compact car designed for efficient urban transportation and was one of the first cars to feature a continuously variable transmission (CVT), which was a significant innovation at the time. The CVT allowed for smooth and efficient power delivery, contributing to the car's reputation as an economical and practical choice for drivers. DAF's focus on fuel efficiency and practicality made their cars popular in the European market, especially for urban commuters and those seeking affordable transportation. In addition to the DAF 600, the company produced other notable models, such as the DAF Daffodil and the later DAF 33 and DAF 44, all of which were designed with economy and practicality in mind. DAF also gained recognition for its innovative Variomatic transmission, which contributed to the company's reputation for producing efficient and reliable vehicles. While DAF's focus shifted more towards commercial vehicles in later years, the company's early contributions to the development of economy cars left a lasting impact on the automotive industry.
@mistersunday_ Жыл бұрын
Best channel on KZfaq for me. I really appreciate the effort that goes into these videos. If you had a studio and post-production and high quality video, this would be a channel to rival many others
@ThinkingandTinkering Жыл бұрын
Wow, thank you!
@cosmicplasmawizard Жыл бұрын
My friend had a Yamaha scooter with a CV transmission. It was very fun to accelerate. It always had the right amount of power and went up to 70 mph I think. Kind of like an electric car nowadays.
@htmagic Жыл бұрын
RMS, a mouse ball out of an old mouse would work great. It's hard and rubber coated. Fascinating! Thanks for sharing! Cheers!
@corbinschuster2664 Жыл бұрын
Only just stumbled upon this channel, brilliant content!!!
@ThinkingandTinkering Жыл бұрын
Cheers, mate!
@xDR1TeK Жыл бұрын
Well, rubber is a consumable. Probably best to go with anything but rubber. Very informative presentation, loved it.
@TimeSurfer206 Жыл бұрын
One of the joys of a CVT in modern autos is people. We are so used to distinctive gear changes that manufacturers have had to ADD them in, by way of programming the on-board computer for such. This leads to early failure of the CVT because it was designed for SMOOTH, not lurching, transitions. People are stupid. I, personally, am glad I am SMART enough... To remember I, too, am a people. Most of the time. 🙄
@eh1702 Жыл бұрын
OMG! I actually understood the conical gear when you used the golf ball! I have TERRIBLE spatial cognition/imagination. The feeling of intuitively understanding something like this is really weird for me. It feels really beautiful. It *looks* really beautiful!
@banana1618 Жыл бұрын
great to see an idea put into reality, Robert - wtg! Looking forward to see it working effeciently.
@billledbetter740 Жыл бұрын
Outstanding presentation, very entertaining. Thanks.
@RikMaxSpeed9 ай бұрын
I kept waiting for you to demo how the Toyota hybrids work as the all use CVT and it’s brilliant to power the wheels or recover energy!
@russellzauner Жыл бұрын
There's one more CVT that I've seen, and I actually bought one and am putting it onto my tadpole (reverse trike, I'm disabled) that I've upgraded for pedal assist. When I added pedal assist, my whole drivetrain started dying, quickly, so I'm upgrading to belt transmission (Gates and Veer make belt systems for velos) mated to a CVT IGH made by a company called Enviolo. There's a bike company called Priority that offers CVT as a factory option on their bikes. I'm not affiliated with any of these companies, I feel like I have to keep saying that. I spent 25 years in many areas of technology development and deployment and while I can't have that job any more (they fired me, they only have to wait 12 weeks by law to replace an injured person) I have pretty much everything I learned still knocking about somewhere in my cells. I don't want to see that wasted - so I drop these things in places...to see if someone finds the thing I did, and encounters the same joy. Even if our projects are different, our joy is still the same. Joy is joy. Everyone should have some more.
@TheRealFOSFOR Жыл бұрын
Lovely stuff. Funny how I have been trying to invent different types of variable transmissions over the years, just for fun, now I see every single one of them has really been produced. + a few I didn't think of... I always thought my ideas were somehow not possible at all. It seems like I was wrong.
@jonbutcher9805 Жыл бұрын
It's the most annoying thing ever, believing you've created the next best thing the human race needs only to find out... Already done. So many sleepless nights thinking this is the one time I'm going to beat the odds. Urgh!!!
@TheRealFOSFOR Жыл бұрын
@@jonbutcher9805 Nice to hear I'm not alone. But I've gotten used to it. I guess that's one reason why older people aren't as innovative as young people, you get cynical and give up on trying new things.
@jonbutcher9805 Жыл бұрын
@@TheRealFOSFOR amen brother. Dreams are for the young.
@regularfryt Жыл бұрын
Moving that golf ball sounds like a job for a centrifugal governor to me. Sort of thing James Watt would approve of 😂
@jamesstrawn6087 Жыл бұрын
Great and informative! I have for a very long time wondered if this problem could not be solved by using the wind to create potential energy, say gravitational, and then later using this potential energy and the consistency of gravity to get the desired hertz.
@Bob.Jenkins Жыл бұрын
Easy enough to move the Golf Ball - place it on a rail where its position is determined by centrifugal weights attached to a small flywheel attached to the main input of the Wind Turbine shaft. As the Wind Turbine Shaft's speed increases/decreases - the weights will move and this movement is applied to the Golf Balls Horizontal position. Similar to the method of 'tuning' an old fashioned Car Distributor.
@tatoute1 Жыл бұрын
Good idea , but there is no feedback. The graal is to find a way to drive the ball by the output speed error. Not so easy if we want a purely mechanical system. if we mount the ball on an endless screw, we may drive this screw by a disk rolling friction roller. Output centrifugal weight will move the roller on the disk, with the roller at the center for the exact speed.
@jeremybrown8263 Жыл бұрын
Was thinking it could use fluid pressure like a modulator valve on an older automatic transmission. The increased rpm would drive a pump to move the ball on a fluid filled rail and to have a spring attached that when rpm decreased it would return to its original position or if rpm is constant fluid pressure would be constant. The only thing is having the fluid pressure over come the spring pressure. Idk just thinking out loud lol. Lots of cool ideas hear
@melvin6840 Жыл бұрын
@@jeremybrown8263 Haha! Yeah..I think that would work. The reason I laugh, is because I clicked on this video because of the picture. The cone transmission that I, "invented" several years ago. And then, while reading these comments about regulators, I was thinking about using fluid pressure as a regulator. Actually, only moments before reading down to YOUR comment, which describes the very idea I was thinking on. Haha! Wonderful to be in such good company.
@jeremybrown8263 Жыл бұрын
@@melvin6840 cool, I think my idea would work bit in a caveman since of it the guy with the original comment had I good idea about the centrifugal weights, I think maybe an electro magnet that would increase and decrease in intensity do to rpm could also work. But I feel like for now as of reliably fluid pressure would work best,we know much more about fluid dynamics than we do about magnetic effects...I assume I really don't know just still thinking out loud lol sorry for the typos
@melvin6840 Жыл бұрын
@@jeremybrown8263 I agree with you on that. Fluid pressure is easier to work with, I think. As the pressure increased, it could push (or pull) against a spring, and change the "gear ratio". Also, having a pressure tank would be a simple way to "start it up" without a load. The windmill wouldn't be pushing against anything until the pressure built up.
@Suzuki_Hiakura Жыл бұрын
I had been wondering about CVTs on wind turbines since about 2021. Am glad to finally see it covered. Look forward to seeing what you do with it :D
@Dennis-uc2gm Жыл бұрын
I have a Dixon ZTR that uses a drive system with 2 cones belt driven off the motor, best lawn mower I ever had. It's outlasted another name brand ZTR that has two hydraulic transmissions that I also use. I wish you could still buy them with that type of transmission.
@slrnuttall Жыл бұрын
Mate, I love your enthusiasm for making. Keep on it! Cheers
@edwardcdg Жыл бұрын
Always fascinating! You are the new "Amateur Scientist" (remembering the old Scientific American). References and attributes shared. Applause from the Peanut Gallery (a cultural allusion from the other side of the pond).
@10sheds21 Жыл бұрын
Gosh I cant wait for the next installment, thrilling stuff. Your videos should be part of the national curriculum.
@peterkent2138 Жыл бұрын
Traditionally bob weights would be used to vary the golf ball position. The faster they spin the further they tend to force away from the centre, linking this to the golf ball would be the control. You see the same idea on old steam engines as governors.
@j.f.christ8421 Жыл бұрын
That's where the term "balls to the wall" meaning "full speed" comes from.
@786ALHAQ Жыл бұрын
Your videos are always excellent. Helped me a lot .Thanks :)
@zacharycawthorne-nugent4988 Жыл бұрын
The constantinesco torque converter is one of my favourite IVT out there! Loved the mention! Not often you hear it on here!
@kevinbowker2385 Жыл бұрын
Always enjoyable and informative!
@wesKEVQJ Жыл бұрын
I have a wind turbine idea. Build a railroad track in a large circle. Put a train on the tracks with flat cars and DC generators that spin up when the train moves and send their power into the tracks. Place sails on the cars that turn to catch the wind, like a sail boat on autopilot. If you built them around towns on elevated tracks they wouldn't interfere with traffic. At 5 knots a 100 square foot sail will make about 1491 watts. That's on par with good solar panels at full sun. I've had people tell me it's a dumb idea but no one can tell me why. A small crew could man it and make sure the automatic controls are working. You might need to design the track so the wheels are locked in and it can't blow over. You could make solid sails instead of canvass if you wanted to make it last longer. If each car had a 60 foot tall by 30 foot sail it would make about 25 kilowatts. If the track was 15 miles long it would make about 15 megawatts. You could also control how much of the sail is in the wind so it doesn't go too fast if it gets windy.
@Voidy123 Жыл бұрын
2 cones lined like a motor with coils on the outside and the inner cone like a stator with permanent magnets should make an awesome wind turbine, you could vary the rotation power by moving the stator in and out of the coils, this should eliminate over speeding and improve efficiency, basically a long cone shaped generator. The more magnets you can use in the correct configuration should also eliminate vibration. The further the cone is open the less wind power would be required to start the turbine and it's peak performance would be able to be determined on the fly.
@glynluff2595 Жыл бұрын
Sounds good what’s stopping you!
@MrRedeyedJedi Жыл бұрын
I'm assuming the force of the wind on the blades pushing would cause the cone to be forced back further into the permanent magnets, the magnets interacting with the stater, repelling it back when less wind force acts on the blades? Either way a brake still needs to be implemented for safety and sliding bearings. In the end cost and output Vs the old systems would be what people look at when you put this new design against the old
@Voidy123 Жыл бұрын
@@MrRedeyedJedi Yeah, the in-out movement could also be controlled electrically. You could perhaps add a cone on each side, like this , and achieve double the generation and braking effect by moving the outer cones towards each other. This way, you might obtain a magnetic bearing effect, reducing friction significantly and minimizing bearing maintenance. The cost should be offset by increased efficiency. I will build a small-scale prototype and see how it performs.
@glynluff2595 Жыл бұрын
I have not thought the detail of @voidy remarks totally through. However, I cannot believe that a wind shaft would be viable without a thrust bearing. The dynamics are such as cause potential calamity at an early stage whether by fan or helix. CVT systems are about I/p & o/p linkage in this case in cone form. Electrically the suggestion of intensifying or reducing o/p relative to speed and power demanded in real world conditions would need proving. I imagine this would probably be by a fixed cone on o/p and a sliding cone on i/p. The travelling cone would possibly be via a mechanical scroll over a fixed distance according to speed with advance retard by mechanical or hydraulic recuperation. As you say this would depend upon the complexity of engineering design relative to current gear box economics. Engineering costs vary with availability of materials, the ability to work them, operational process of construction and the maintenance requirements one installed. To this must be added the financial desire of the backers who may well be a mindset apart from the developers. So can the new device if marketed outweigh financially the devices on the current marketplace and is there the political will for such a concept to succeed? This latter is important as if anything interrupts the paper trail of carbon footprint trading in which huge sums are made by financiers and politicians it is a dead duck and I make that statement with a considerable life behind me!!
@MrRedeyedJedi Жыл бұрын
@@Voidy123 you have a good baseline principle to start on paper, run in simulators, but don't over complicate what you originally thought of. Always start simple on original idea and build from there where needed. The issue with magnetic bearing idea, although a great idea on paper, is the magnetization can weaken over time and it only takes a tiny imbalance and itl stick to the side somewhere. You do have a good idea to work with though
@iantheinventor8151 Жыл бұрын
On the subject of variable transmission there is an Internal Geared Hub for bicycles called the NuVinci which gives a constant variable gear range, believe they’ve mention adapting the system for other applications. Motor vehicles have been mentioned & I’d bet they could be adapted for wind turbines.
@jebise1126 Жыл бұрын
what gear ratios do they support? is it more of a city bike or for more terrains? what are its advantages?
@cliveclapham6451 Жыл бұрын
Excellent waistcoat and long coat ❤
@christopherpardell4418 Жыл бұрын
Have a Shopsmith woodworking machine. Its power head as a continuously variable transmission that is essentially two variable diameter pulleys with a single belt between them. And crank handle changes the diameter on one pulley, and the other pulley is spring loaded so that when you make the cranked pulley larger, it pushes the nested pulley halves on the other pulley apart, making its diameter smaller, and vice versa. The thing has worked great for 40 years without ever even replacing the belt.
@ibme8359 Жыл бұрын
I live on a golf corse and find 'em lay in 'round my yard. FINALLY found a way to utilize those "pesky" things!!!
@tomstanley7772 Жыл бұрын
Okay......I think I might be hooked . I will watch more of your videos.
@paulbrimo4437 Жыл бұрын
Finally a decent channel worth watching ❤
@heinrichtonsing795 Жыл бұрын
What you can use as a setup to move the ball up and down according to whatever setpoint, you can use what old pneumatic steam intergrators used to govern at a set speed. It make use of the centrifugal force on a lever that will provide the feedback or relevant force against a changeable anchor point.
@michaelmiller94525 ай бұрын
The Swiss EGG automobile had a belt drive variable radius cone transmission in 1896. The same engineer also sold the idea to the Swiss Egli car a few years later.
@0bzen22 Жыл бұрын
A very cool one is the Toyota E-CVT power-split device, in their Hybrid Synergy system. Using an electric motor to modulate the relative rotational speed / torque between the input and output, in a epicyclic / planetary gear drive. Basically, what's in th Prius, and all their subsequent hybrid engines.Very reliable, very smooth, very efficient, mechanically very simple, no friction wear.
@martinsaint9999 Жыл бұрын
Strange coincidence: Yesterday I read the first time in my life details about CVT transmissions and - voila - today there is your video about this theme. 🤔
@gooseknack Жыл бұрын
There was a car called the Owen Magnetic, that utilised a magnetic drive system back the 1920's or 1930's. It was essentially a generator that drove an electric motor, that housed within a single unit, so not strictly a Magnetic drive, but close to it. There was no direct mechanical link between the 6 cylinder motor and the wheels. It was an insane design. It was variable speed(had selectable gears via resistors) and had reverse.. the electric motor also acted as the starter and I believe, also allowed engine braking. Details are a little sketchy. Jay Leno has a fully functional Owen Magnetic car in his museum in California. He featured it on his "Jay Lena's Garage" youtube channel quite a while ago.
@TheNoodlyAppendage Жыл бұрын
Ive seen these used in wire production machines, to draw the wire through diamond rings in order to reduce it gauge from 2 inch copper coils down to small enough to use in microchips.
@dr.hishamabdulmajeed6951 Жыл бұрын
Nice coat 🧥 ! Looking sharp 😉
@piccalillipit9211 Жыл бұрын
*WOW* that was good video quality for 1972
@cyclic2696 Жыл бұрын
Fascinating! My first motor transport was a Norman 'Nippy' moped which was belt drive via a CVT on the engine. Ball bearings flew out in a captive disc forcing the belt in the V gap up higher thus rotating quicker to drive the rear wheel. Dated from 1959/62 era. This whole video of almost 10 minutes was done in virtually one breath 😊 Please take a bit more time to explain things RObert - still most enjoyable to a mechanically minded person.
@HansHartman Жыл бұрын
I love mechanical transmissions. When I was a kid, I had many nocturnal transmissions. 🤔🤣
@kathrynck Жыл бұрын
A simple spring-loaded paddle which bends in the wind could move your golf ball. Alternatively, it could move based on torque of input through slightly more complex means.
@DeeDee-pw9pm Жыл бұрын
I love simplicity and think your spring load idea is brilliant.
@brandonfranklin4533 Жыл бұрын
Wow i had now idea the CVT went back so far! Great video as always, Rob!
@davefroman47009 ай бұрын
Moving the golf ball is a simple matter of having it linked to a traditional mechanical governor. As the input shaft increases, a linkage from the governor to the golf ball can move it back and forth.
@marcfruchtman9473 Жыл бұрын
A really great review of CVT! Well done!
@GlassEyedDetectives Жыл бұрын
Another fascinating short and you got me a thunkin'.....design a mechanism that utilizes a wing attachment that would be lifted or lowered depending on the wind speed...as the wind increases or decreases, the wing attachment lever would lift or lower and that lateral up/down motion would then govern where the 'golf ball' sat on the cone rollers.....mmm? anyways, good stuff Rob, you are a great inspiration.
@robertkraft2358 Жыл бұрын
The Constantinesco type transmission was always an interesting option.
@whitelion7976 Жыл бұрын
Quite an exciting video this is. I just have exactly the right application for this and I had no idea it could be done this way I have to control the speed of a rotating plate and I would have made electronic speed adjustment with a PC board but this is without electronics and therefore I can use a ac motor and have far less interference on the master amplifier which controls the cutting head. The same principle applies to its feedscrew which would allow me stepless groove pitch. This being a vinyl LP record cutting lathe BTW. My current one I made uses dc motor and has interference. Thanks for this.
@BJL2142 Жыл бұрын
for the yoke? control, have a threaded control rod attached to a small stepper motor thats controlled off of an arduino tabled for target ratios at a given fan speed, rpm can be gathered from using hall effect sensors
@dSquared0162 Жыл бұрын
Sounds like something to be pondered... on the golf course! (or on the 19th hole) 👍
@dSquared0162 Жыл бұрын
So if you turned it on it's side, would the natural propensity for the golf ball to be attracted downwards by gravity be overcompensated by the speed of the turbine - ie. would it want to raise upwards (to an 'easier' ratio) as the speed of the input increases? (I suspect not but might be an interesting test)
@krashpass Жыл бұрын
Not quite on subject, except for the cvt, but one of my favorite all time systems was in the Harley golf carts in the 1960s or so. They used a single cylinder, 2 cycle engine. Once started, the starter becomes a generator, and to back up, a switch simple runs the motor in reverse. And that goes through and expanding pulley cvt. Amazingly simple, and nearly indestructible in the hands of drunken golfers LOL
@russ549 Жыл бұрын
Gearing is so much more important than most automobile companies seem to understand. With proper gearing engines could be about 60%-70% smaller (and there for much more efficient too) they would still achieve the same speeds.
@theimpatientbrewer Жыл бұрын
My dad used to have a DAF car in the 70s with a CVT.
@Shadobanned4life Жыл бұрын
Thanks for a great video ! 🌞
@leszekkujawa6263 Жыл бұрын
Great content well presented.
@raitshots Жыл бұрын
Long time engeener technology easy mechanic variants 😎👍
@glencahalin4786 Жыл бұрын
If you embed magnets in the rim of the input cone you could make it pass over a coil and it's rotation speed would determine output voltage of that coil. That in turn could determine the position of a stepper motor controlling the golfgear position. Of course, me being me, I'd want to take more advantage of multiple magnets on the input cone, via a serpentine coil, which could effectively be not just the golfgear control voltage but also a lower power generator, that keeps the golfgear out of contact until it's reaches a speed/torque which is high enough to get something useful from the main generator. The end result would be a dual system, where at low wind speeds it'd use just the input generation system, but above a certain windspeed the main bigger output one too.
@koaasst Жыл бұрын
i found a curb treadmill but when i saw it i thought, well dang this is old and probably not too much good scalvage. it had a pully setup like this though, changing the width of the belt groove for speed control with a little knob up by some handlebars. oh yes, it has been a wonderful find, and has been a part of many contraptions over the years!
@Gainn Жыл бұрын
A centrifugal governor attached to the output shaft of the turbine seems the most logical choice.
@stephenevans8355 Жыл бұрын
Whippletree for combining power from multiple horses. Also used in IBM typewriters to vary force for different characters - less for a full stop and comma - more for letter W.
@Martin-se3ij Жыл бұрын
That, I never knew but makes sense. Remember old mechanical typewriters where the full stop would practically go through the paper.
@hissst69 Жыл бұрын
Oh that was fun.. my god there are some ingenious inventions out there eh ?! 😊 I always thought a printer would have all right bits to make a really nice precise variable transmission.
@donniewatson9120 Жыл бұрын
The Whippet used a manually controlled CVT similar to the Snapper mower transmission.
@robturner3065 Жыл бұрын
So much info packed into ten minutes! What about the braked-planetary transmission on the model T? Revolutionary in it's day. There was an hydraulically-braked planetary transmission made by Carver, instead of braking the rotating gearbox with shoes like the Ford it's rotation was made to pump hydraulic oil, the flow being controlled by a valve to vary the speed.
@asharma9345 Жыл бұрын
Keep it up Sir, Respect.
@rowanbrecknell4021 Жыл бұрын
There is a transmission for bicycles that uses cones and balls with a swash plate to change the gearing. There is also a substance like corn starch inside that goes hard under load and then liquid when not loaded. It is not CVT but is is worth a look to help with the design.
@Xanderbelle Жыл бұрын
My mum had a car with cvt when I was a kid (something E european) sounded like it was driven by rubber bands. 😊
@binmanblog Жыл бұрын
What a great mind
@kavalkid1 Жыл бұрын
The demand should place the ball in the position best suited to provide power for the task. Pure physics.
@gizmo9133 Жыл бұрын
This guy seems like that one high school/college science teacher that somehow genuinely enjoys his job
@ScoutSniper3124 Жыл бұрын
I ran across a NASA Tech Brief in the early 1980's which showed almost the same set up as the one at 4:18. The one major difference was it used a two faceted transference wheel (between the drive and driven cones) which acted to give both surfaces that reduced side slippage during the transfer. For example, if the drive and driven cones shared an angle of say 20 degrees, the transference wheel would be peaked at the midway diameter, with 20 degrees reducing sloops down either side. I though it a good idea and being a NASA Tech Brief means it can be copied, improved upon and used by an American Engineering firm that wished to use it, with their being no Patent nor Intellectual Property Rights exerted by NASA / U.S. Government.
@yasirrakhurrafat1142 Жыл бұрын
Been trying to figure out the solution to the exact problems you mentioned here mate! And just as I see this video in the list, you bet I click it faster than the speed of light. I was also thinking of a high response voltage regulator to attach to the turbine generator such that the generator output voltage remains the same. Something like a variac or autotransformer or something. Could also be practical? Amazed by the varieties of CVTa you mentioned here, always tried looking for more designs of CVTs.. but couldn't find. You may have shown something that is potentially more reliable, robust, and efficient and practical. Waiting for you to amaze us with more phenomenon or trick or many useful unknowns that are as amazing as you are sir.
@DavidD6969 Жыл бұрын
Great stuff there👍
@k.d.9039 Жыл бұрын
You could use the electric output to control the position of the golf ball, thusd when input rotation increases, and thus the electric output varies, the ball is moved to a different position.
@alanstone9836 Жыл бұрын
Wind turbines at the moment use variable pitch control. The gearbox is used to increase the speed of the generator. The generator puts out DC which is then inverted to AC to the correct frequency.
@mauriceupton1474 Жыл бұрын
DAF used it, and now most cars use CVT transmissions. Cotton mills also used cone drives CVTs to. Disadvantage is Limited in power transfer.
@Unpopular_0pinion Жыл бұрын
Great stuff, Rob!🎉 A like and comment for the algorithm 😊
@ThinkingandTinkering Жыл бұрын
You rock!
@Unpopular_0pinion Жыл бұрын
@@ThinkingandTinkering likewise compadre
@trevorgoddard2278 Жыл бұрын
Of course the problem with using CVT's on wind turbines to prevent run-away generator speed problems is, as the wind speed increases the turbine rotates exponentially faster because as you are only taking a constant amount of power out, a higher percentage of the input (wind) power goes into the spinning of the turbine.
@DeeDee-pw9pm Жыл бұрын
That run-away could be prevented by using a centrifugal governor in some way like those used to control RPM in old steam and fuel engines. Maybe a governor could pull up a rod connected to the ball at a certain speed to lift it up and disconnect the input and output shafts.
@trevorgoddard2278 Жыл бұрын
@@DeeDee-pw9pm See my other comment
@willdatsun Жыл бұрын
This started to sound like the turbo encabulator video at one point!
@thepvporg Жыл бұрын
A speed governor on the input side that pulls or pushes on the drive ajuster is all that is needed.
@ez1913 Жыл бұрын
Brilliant. You're hard to keep up with, Robert. My poor Elegoo suffered a strike and jam under the gantry. What a mess indeed, and parts not so easy to order from elegoo. Now we'll be further behind the project list. LOL
@ThinkingandTinkering Жыл бұрын
Oh no!
@ez1913 Жыл бұрын
@@ThinkingandTinkering My Z offset went from -0.720 to +3.240. It's a mess.
@InssiAjaton Жыл бұрын
The first time I remember having seen anything about the CVT kind of transmission was when the technical trade press told about the Dutch DAF car. Some test report mentioned how odd it felt to just press the gas pedal all the way to floor, and the motor sound never changed, but the car speed did. I think that introduction was some time around 1960, maybe a little earlier, maybe later. Later on, I have seen a number of new versions described, although I never had such a device in my hands. Or maybe I must count the band saw at my working place. The band speed was adjustable by some such device. But the times of disassembling an alarm clock were behind me, so I never saw what was inside...
@markje68 Жыл бұрын
I think you have seen the introduction of the Daf 600 which was produced from 1958 to 1963.
@stewartpalmer2456 Жыл бұрын
Dr. Smith, you're the Governor. Opps. I mean you need a Governor. Perhaps based on the wind speed. LOL
@rfiskillingussoftly6568 Жыл бұрын
Very nice! Well done! Love it!
@ThinkingandTinkering Жыл бұрын
Thank you! Cheers!
@fyremoon Жыл бұрын
So a possible solution would be a threaded shaft driven by an electric motor and two sensors to measure the rotation of both drives. You can then difference the speeds between the two drives and then drive the thread back and forth to position the golf ball where it needs to go. I don't know if this could be achieved mechanically with some sort of differential gear to vary the threaded shaft to keep the output speed the same. Its worth adding an anemometer and brakes to the input drive from the turbine so that in very windy conditions, the turbine can be shut down to prevent the turbine being destroyed in gales and hurricanes.