1973-1979 Ford Pickup Door Window Seals Replacement

Рет қаралды 2,356

4 ай бұрын

These weatherstrip seals were part of a complete seal kit from Precision Replacement Parts (raybuck.com/product/1973-1979.... This kit is specific to trucks that have the chrome trim around the windshield, and there are other kits for trucks that do not have this. Or, you can buy the pieces separately, and I'll list them below:
Door Seal, Fits on cab - raybuck.com/product/1973-1979...
4 pc Inner/Outer Beltline Kit - raybuck.com/product/1973-79-f...
Upper Glass Run Channel - raybuck.com/product/1973-1979...
Division Post Glass Run - raybuck.com/product/1973-1979...
Vent Seal LH - raybuck.com/product/1973-1979...
Vent Seal RH - raybuck.com/product/1973-1979...
I finally got around to replacing the door glass run channels, beltline (fuzzies), and wing vent window seals in the 1973 Ford F350 Super Camper Special. This would be the same setup for any 1973-79 Ford pickup, though. Assuming the seals on your truck aren't petrified, like how mine were, you should be able to do this replacement in a few hours and with minimal tools. Just take your time and pay attention to left/right, inside/outside ;)

Пікірлер: 6

@mikericcardi1491 Ай бұрын

I recently replaced the weather stripping on both doors and the carpet as well. I used your video as a guide on my 1973 super camper. It turned out great. Thanks for sharing your experience.

@RaybuckAutoBodyParts Ай бұрын

Awesome! Glad it helped.

@mylinedancer Ай бұрын

Thanks Man!

@ixryq8368 3 ай бұрын

Hey just did my driver side. Btw you didn’t have to take it drill the rivet out all you had to do was take them two bolts off holding that bracket. Went very smooth

@RaybuckAutoBodyParts 3 ай бұрын

Thanks for letting me know. Guess I should have tried that first 😅

@ixryq8368 3 ай бұрын

@@RaybuckAutoBodyParts yea brand new sills and mine have a slight leak on the vent window. Big lean n bottom window sill. I just couldn’t put my self to cutting a new sill and me thinking it would leak from there haha. Then I seen the bracket bolted to the frame and was like heck yeah