1973 Honda CB750 Tank Dent vs Inner Tube

Рет қаралды 115,632

Жыл бұрын

1973 Honda CB750 Tank Dent vs Inner Tube #Honda CB750 #cb750 #vintagemotorcycles
Welcome to our latest video where we attempt to repair a dent on the gas tank of a 1973 Honda CB750 using a paintless dent repair technique. In this video, we take you through our process of trying to push the dent out from the inside using an inner tube, and then using a rod and hammer to work on the dent.
While we did not achieve a perfect result, we were able to make some improvements to the dent, making it better than before. Along the way, we also had some fun trying out different techniques and tools to see what works best.
If you're interested in learning more about paintless dent repair and seeing how we tackled this particular dent, then be sure to watch the full video. Whether you're a seasoned mechanic or just someone who enjoys working on classic motorcycles, there's sure to be something in this video that you'll find interesting. So sit back, relax, and join us as we attempt to beat this dent into submission!
We have merch. We have t-shirts through the 3rd party provider Spring
motorcyclerewind.creator-spri...
We have patches and up-cycled work shirts.
Order information coming soon.
Sponsorships opportunities: If you would like to sponsor our channel on contact us at motorcyclerewind@gmail.com and put the word "Sponsorship" in the subject line.
All music by Bensound
For Aftermarket Parts
www.speedmotoco.com
For OEM parts for your Vintage Motorcycle
www.cmsnl.com
In southeast US and need service or parts visit
www.hurricanevintagecyclework...
Viking Bags Motorcycle Luggage
www.vikingbags.com
F40 Jump Pack
www.jfegwo.com/products/f40-4...
Use Coupon Code - REWIND and save 10%

Пікірлер: 251

@mikehunt8968 Ай бұрын

The best way is to fill it with water and put it in a freezer... you will have to do that several times, but it does work!

@motorcyclerewind Ай бұрын

That sounds like fun. I have another dented tank may have to give it a shot. 😂🤣😂 Thanks for watching

@MaryK4242 25 күн бұрын

@@motorcyclerewind OH, I got to see this!! Doooo IT! 😉😉

@charlesshort4287 21 күн бұрын

Ratchet strap for tank, Shut the gas cap and blow air in the pet cock,

@timrobertson299 20 күн бұрын

I was just going to make that comment! 👍

@Artoconnell 14 күн бұрын

This idea wins the budweiser real men of genius award. great idea Mike.

@Bikesnboots-sl2iu Ай бұрын

Ahhhh love the sound of a bike tank scraping across bare concrete😳🫣

@motorcyclerewind Ай бұрын

Thanks for watching.

@Studio51media 14 күн бұрын

Funny I was thinking the same thing !

@burtreynolds3143 8 күн бұрын

my fav part as well

@spurgear4 7 күн бұрын

I had to leave. maybe next time.

@rogerthedodger5788 4 күн бұрын

Haha! I was cringing!

@joedyck5700 Ай бұрын

I used a blood pressure cuff with a squeeze bulb. Worked fine on my 1978 Honda 750. Easier to control where it is pushing. Saw it demonstrated on a KZfaq video. Great for a tank that you don't want to re paint. Yes finished of the job with a short wooden broomstick handle. Most people would never know that the tank had been dented...

@motorcyclerewind Ай бұрын

That’s a great idea. Thanks for sharing.

@tomnekuda3818 Ай бұрын

I love hare-brained schemes like this.....I must; I've engaged in a whole bunch of them.....and I have the scars. I have even put water into dirt bike expansion chambers and put in a chest deepfreeze to push out dents. Great video!! P.S. ALWAYS keep your leg under the tank when you drop it at speed on the highway!!! LOL.

@motorcyclerewind Ай бұрын

Glad to hear from another “hare brain” 😂 Great minds think alike. Thanks for watching

@markserpa4511 28 күн бұрын

Went to a high end shop in Santa Cruz bitd for a tank dent. He went to his tool box and dropped in a lady fingers firecracker after water rinse. Worked great that particular dent. He joked about having only a few firecrackers left. Me and my friend brought him some to fill the one particular drawer. This was in late 80’s.

@motorcyclerewind 28 күн бұрын

Sound like I need to go firework shopping this July 4th.

@thangknowa3288 7 күн бұрын

El Cheapo dent removal tool with glue. I have been thinking about practicing to prepare on a good deal on an appliance bargain at a scratch and dent sale. First get good on a washer or dryer, then someday - REFRIDGERATOR!!!

@motorcyclerewind 6 күн бұрын

I really like the PDR kit I have. Not expensive and rewarding to do. Even if you don’t get the dent completely out. It’s still better than before. Thanks for watching.

@vlratcliffe1 9 ай бұрын

I agree with last posters put a peice of rope around the tube .an the pump it up after you warmed the tank up as hot as you cani did the same thing on my tanki filled it with very hot water then pumped it up also heat gun it pushed the hot water out but it kept it warm to pop out dents . Even ones i didnt notice .After i done the tank a part on the bottom (where your nuts go) was a lot smoother i just thought it was supposed to be like that .

@motorcyclerewind 9 ай бұрын

That’s a great idea. I am going try some heat with the next one. Need to find a dented tank.

@rossk4864 7 күн бұрын

I haven't seen this technique used, but I'm thinking that a rubber plumbing test ball could be used. These devices have a Schrader valve and are designed to fill the interior of a drainpipe to force open a blocked sewage system. They are available in most any plumbing supply store, in a variety of diameters from about 1-1/4" to 6". Each is expandable to fit a range of diameters. Fill the tank mostly with water, insert a test ball and inflate with an air compressor. This will seal the ball inside the fill neck and continue to pressurize the interior of the tank, applying equal pressure to all inner surfaces and hopefully pop out the dent.

@motorcyclerewind 6 күн бұрын

That’s a great idea. Off to Home Depot I go. Thanks for watching.

@jarikinnunen1718 8 күн бұрын

Concrete mold with reinforcement and water pressure. The first two-piece mold and its dent repair. Tank in and high water pressure in.

@motorcyclerewind 8 күн бұрын

This sounds fun. Time to make a mold.

@SuperSushidog 27 күн бұрын

I had a brown K3 just like that. I bought it new for $1,550. I remember when they did the push button latch recall for the key latch. It sure brings back memories of the good ole days. Thanks.

@motorcyclerewind 26 күн бұрын

Thanks for watching.

@BrickHouseBuilds Жыл бұрын

Very cool! I found it difficult to place the tube exactly where needed. You definitely had a firm dent so perfection can't be the goal but nothing ventured nothing gained!

@motorcyclerewind Жыл бұрын

Shooting in the dark, hoping the tube is in the right place. You’re right not looking for perfect just better. Thanks for watching.

@motorcyclerewind Жыл бұрын

I had a friend call and say he was yelling at his phone to put some soap on the inner tube to help putting it in. That would've helped sooner! 😀

@shovelhead4558 10 ай бұрын

Well worth a try nice one.

@motorcyclerewind 10 ай бұрын

Thanks for watching

@officialmysteriousrider130 3 ай бұрын

@@motorcyclerewind blood pressure cuff works well or plastic bottle

@TorquilBletchleySmythe 9 күн бұрын

When we used to pressurise our tanks back in the day, the trick was to use a 27" mountain bike tube. You fill it to thr point where the tank is under pressure, and tap the edges of the dent with a nylon hammer. It pops out gradually as you tap and add pressure. Its not meant to pop the dent, just put some force on the inside to work with. The bike tube comes out easy too.

@motorcyclerewind 8 күн бұрын

Using a smaller tube would have been better. Thanks for sharing.

@cyclerider5652 23 күн бұрын

I agree that better is good. Doesn't have to be perfect just better than before. I fix what jumps out at me first. I worked with a guy who said he filled his dented tank with water, sealed it up then put it on a campfire. He said it exploded with a ruptured seam, flew through the air like a missile, then landed on one of those farming, tilling things with all the disks, destroying what was left of the tank. It was quite a story! Lol.

@motorcyclerewind 22 күн бұрын

As long as it’s better than where we started I’m good. Wow on the campfire tank missile. Thanks for watching.

@mmotorcycles9497 Жыл бұрын

I’ve never heard of the innertube trick. Worth a try. I just had my pdr guy do a tank for me so I could minimize the paint area.

@motorcyclerewind Жыл бұрын

Didn’t think I could make it worse. I have a PDR kit and may use it later to get out some of the dings. Thanks for watching. I really appreciate it!

@hodaka1000 6 ай бұрын

I've seen videos of people using basketballs to push dents out on car panels

@luckyfreeman5079 5 ай бұрын

That will fix the dent

@waiting4aliens 24 күн бұрын

rubber bands around the inner tube use the wasted as a liner and lots of soap suds. Knock a diamond loose on that ring and you are so in trouble.

@motorcyclerewind 24 күн бұрын

Thanks for watching.

@VadoVoodoo 7 күн бұрын

Attack from the outside use those puller rods that you spot-weld on and then cut and file off..

@motorcyclerewind 7 күн бұрын

The last time I tried to stud weld dents ended up having a welder fix all the holes. 🤣😂🤣

@patrickroeill8746 15 күн бұрын

Should heat the dent up with a hair drier or pour boiling water on the dent. You did a good job pulling out the dent looks good

@motorcyclerewind 15 күн бұрын

Thanks. It’s not perfect but way better than before. I really enjoy trying to make these old tanks better. Thanks for watching.

@MrVinnyh Ай бұрын

Interesting how the inner tube worked, most garages would drilled and pulled the dents out, but fellow Brit suggested water and freezer sounds interesting 🤗 or could a case of 🤬

@motorcyclerewind Ай бұрын

Need to wait till my wife goes out of town so I can put a tank in the freezer.

@pauljanssen7594 19 күн бұрын

Simply brilliant for some tanks, and I found out that apple cider vinegar will eat the rust in any gas tanker anything rusted. Put some fish tank rocks in the air and speed it up.

@motorcyclerewind 19 күн бұрын

Aquarium rocks is a good idea. Thanks for sharing.

@AceCafeBikes Жыл бұрын

Boom!

@motorcyclerewind Жыл бұрын

It was so intense. I thought the tank was gonna explode. 💣

@BryanClark-gk6ie 13 күн бұрын

Several different ways you can go at it...heres one. Wash it out getting rid of the fumes.... take a propane torch.... induce propane into the tank' then light it with the torch....tap down eyebrows/high spots during the process. Start out with small amounts of propane increasing and repeating if necessary. I'm not suggesting you do this but that's how we did it back in the early 70's when I first started doing Auto body and paint. Back then we used acetylene/tank/torch.

@motorcyclerewind 8 күн бұрын

This sounds like something that would involve the fire department.

@hodaka1000 6 ай бұрын

Years ago I removed all the dents from a freinds dented Honda 4 tank using different levers through the fuel cap hole

@motorcyclerewind 6 ай бұрын

I have the levers just not very good at it. Thanks for watching.

@AceCafeBikes Жыл бұрын

Nice to see Keri out in the shop with you....maybe some time this month we'll see you guys out riding :)

@motorcyclerewind Жыл бұрын

I am thankful Keri is willing to help me anytime. Definitely will be out riding together. I have to replace some leaky floats on her Hondamatic. Video coming soon. lol.

@JamesParus Жыл бұрын

It hurts to watch the bottom edge scratched to concrete when wet sanding it.

@motorcyclerewind Жыл бұрын

Good tip. I probably should have put something down to protect it. I need to replace the bottom trim. One side has it and one doesn’t. Thanks for watching!

@my357mags 9 ай бұрын

Was thinking the same thing!

@brianjohnson9682 Ай бұрын

I think a better more controllable method would be to seal the filler,turn the tank upside down,fill with water and pressurise through the fuel tap fitting

@motorcyclerewind Ай бұрын

That sounds like it could be fun. I wonder how much pressure the filler seal can hold?🤔 May have to find out. 🤣😂🤣

@howardosborne8647 Ай бұрын

that is the best method to raise a big dent and no danger of exploding anything like there is with compressed air.

@supersportimpalass 15 күн бұрын

Use of an electric pressure washer works the best. No risk of the tank exploding like with air.

@jamesmarty6987 12 күн бұрын

I had a buddy just drop an m 80 in a dented tank and bang. Dent gone and increased capacity.

@MotoMango Жыл бұрын

Using a heatgun from a far while doing this I bet would do wonders!

@motorcyclerewind Жыл бұрын

That’s a great idea. The reinforcement behind the badge was the hold up. Would have been easy breezy without it. Thanks for watching. I really appreciate it!

@mikeelder6298 18 күн бұрын

I owned a 1980 CB 650 Custom, the same color.

@motorcyclerewind 15 күн бұрын

Awesome! It’s a great color. Thanks for watching.

@Herco28 Ай бұрын

Dude... scraping that tank in the concrete

@motorcyclerewind Ай бұрын

Thanks for watching.

@burtreynolds3143 8 күн бұрын

I love this color so much, I'm going to add some of it to my sidewalk.

@philf5043 15 күн бұрын

Tap down the crown of the dent and the tube should do it easier.

@motorcyclerewind 15 күн бұрын

Thanks for the tip. Will definitely use this when I do dent repair again. Thanks for watching.

@Cartier_specialist 17 күн бұрын

I think I would have done a full send with the inner tube -- but that's just me.

@motorcyclerewind 15 күн бұрын

Next time I think I’ll do that. Thanks for watching.

@tobycanales1062 20 күн бұрын

should have let one of those paintless dent guys fix it

@motorcyclerewind 15 күн бұрын

That’s a good idea! Thanks for watching.

@andrewbuchanan6963 7 күн бұрын

I had a piece of pvc pipe fall from my garage rafters and dent my triumph bonneville tank. I used a $20.00 hot glue paintless dent puller kit on it. It took several tries and some engineering,(the curve of the tank and thickness of the sheet metal were challenges) but you have to really look for the dent to see where it was now.

@vanderpoolfarmsl.l.c.9983 17 күн бұрын

Next time, place pressure at midpoint from the inside and then, Ding off the dolly" with a small plastic mallet. That dent would have walked right out. Do a web search for "ding off the dolly".

@motorcyclerewind 17 күн бұрын

All the years I thought, “ding off the dolly” meant something else. 🤣😂🤣

@waynebuzzell2483 19 күн бұрын

I would probably tie a piece of wire or string around the tube for removal. Also some silicone spray would help.

@motorcyclerewind 15 күн бұрын

The wire and silicone spray are great ideas. I really appreciate you watching.

@TheReal10bears 8 күн бұрын

Soap would help putting the tube in the tank

@motorcyclerewind 8 күн бұрын

That’s a great idea.

@DavidBostock-ti2fv 23 күн бұрын

Maybe fill with water and seal cap with sheet of runber gasket material. Apply air pressure through gas shutoff valve. Then use body repair hot glue and maybe tap while pulling. Water is not very compressable. If the tank fails from pressure it will just spray water. If you only use air it could explode.

@motorcyclerewind 23 күн бұрын

That sounds like a great idea. I need to do a follow up video using all the suggestions.

@dcarter001 11 күн бұрын

need a camera on a cable so you can see the proper placement with your basher!( bore scope?)

@motorcyclerewind 8 күн бұрын

That’s a great idea.

@dave5176 24 күн бұрын

You can use the pullers that use hot melt glue to get the dents out.

@motorcyclerewind 24 күн бұрын

I did some of that. You can get PDR kits affordably on Amazon. Thanks for watching.

@nickrudd2568 27 күн бұрын

Worked on my MZ50 Simpson back in the day. Id dented the top i just infront of the seat by having someone sitting on it while messing about. Hardest part was squeezing the 110/80/18 innertube in the fill. hole. Getting it out wasnt as bad as you can yank it. Did mine through a spare cap though.

@motorcyclerewind 27 күн бұрын

That’s awesome. Thanks for watching.

@fuselpeter5393 27 күн бұрын

What is a "MZ50 Simpson "? ^^"

@nickrudd2568 27 күн бұрын

@@fuselpeter5393 80's moped. Google it. Very industrial looking but they tune well.

@andrewtodd3242 18 күн бұрын

@@fuselpeter5393A MEGA moped.. 50cc of class! Mz we're a German brand. 😁

@fuselpeter5393 18 күн бұрын

@@andrewtodd3242 "A MEGA moped.. 50cc of class! Mz we're a German brand. " Well there was never a "MZ50 Simpson" so I was curious what he meant. MZ and Simson are different Brands and MZ never had a 50cc. Smallest MZs were 125cc.

@marcos3ltrv6 25 күн бұрын

Instead of knocking from the inside you should just apply pressure to the center of the dent whilst slapping the outer edge of the dent with a metal padle from the outside

@motorcyclerewind 24 күн бұрын

Thanks for the tip!.

@danielrobert7181 13 күн бұрын

The inner tube may have worked better if you would have heavely lubricated the tube with vaseline (olive oil for you fancier guys) so as to allow the tube to mate with the tank's inner surface ... Well that was my plan anyway. Regards !

@motorcyclerewind 8 күн бұрын

Thanks for sharing

@buzzz241 Ай бұрын

I’ve watched ALOT of KZfaq videos! I would recommend using a deflated football, glue puller, heat and tapping around outside of dent. Thanks 😊.

@motorcyclerewind Ай бұрын

I to have heard about the football. 🏈 one more thing. Lots of patience. Thanks for watching.

@sandmanbub 26 күн бұрын

There are kits available that pump water into expansion chambers to force dents out. Both ends of the exhaust have to be plugged. This can also be used on fuel tanks. Water doesn't compress like air, so there won't be an explosive rupture if there's a crack in the tank or a bad weld.

@motorcyclerewind 26 күн бұрын

Thanks for the tip. I am gonna see if I can find one. Thanks for watching.

@sandmanbub 26 күн бұрын

@@motorcyclerewind I wish you luck. I think you'll find more uses for it.

@kennethdong8490 Ай бұрын

I tried testing a tank for leaks by pressurizing it with air. Didn't take much pressure to bulge the thing.

@motorcyclerewind Ай бұрын

That’s the big fear.

@Mahi-ux1ne 28 күн бұрын

what was the hammering rod tip filled with? I’m thinking of making one of my own. Good video

@motorcyclerewind 28 күн бұрын

It was hollow. Filling with sand would have been a good idea thanks for watching.

@1924ab Ай бұрын

Why don’t you just take it to a painless dent guy, they’re quite good at this kind of thing.

@motorcyclerewind Ай бұрын

I could. I just like to try to sort things out on my own. Sometimes it works. 🤣 I felt I could not make the tank any worse than what it was. Thanks for watching.

@my357mags 9 ай бұрын

Think heating the area with a heat gun before adding air would of helped. I've done many dent removals in tanks with air, I just seal the gas inlet and add air to the tank with very good results.

@motorcyclerewind 9 ай бұрын

Thats a really good tip. Will give it a try on the next one!

@my357mags 9 ай бұрын

👍@@motorcyclerewind

@marktarascio4766 27 күн бұрын

I got a nos set of tank Honda badges !

@motorcyclerewind 26 күн бұрын

Awesome. Send me an email motorcyclerewind@gmail.com

@LilyWillow22 10 ай бұрын

Could ya loop a piece of rope around the inner tube in order to be able to pull it back out?

@motorcyclerewind 10 ай бұрын

That's a great tip for next time. That sounds like you are speaking from experience.Thanks for sharing!

@rivit7615 5 ай бұрын

Why not tap around the dent while the tank is under pressure?

@motorcyclerewind 5 ай бұрын

I am sure that is what someone who knew what they were doing would do. I'm not that guy. LOL!! Next time I will give it a try. Thanks for watching!

@philtucker1224 Ай бұрын

Yes 👍

@daryljones5492 Ай бұрын

Put your dolly in an old sock to help protect the paint.

@motorcyclerewind 29 күн бұрын

That’s a great idea. Thanks for watching.

@joenoneofyourbusiness6487 Ай бұрын

how does the inner tube know what part of the tank is dented?

@motorcyclerewind Ай бұрын

I was using a new SMART tube that uses nano rubber that seeks out dents. 🤣😂🤣 Thanks for watching.

@j1mbobtech 27 күн бұрын

Another thought about the tube... Put sand in to take up some of the expansion space... Give the tube something to push against

@motorcyclerewind 26 күн бұрын

That’s a good idea. Thanks for sharing

@nickdials8596 18 күн бұрын

Fill with water and hook up a pressure washer to the fuel line.

@motorcyclerewind 15 күн бұрын

That sounds like fun! Thanks for watching.

@jimdent351 Ай бұрын

Next time try heating the area with a heat gun

@motorcyclerewind Ай бұрын

In your opinion, should I do it before, during or both.

@jimdent351 Ай бұрын

@@motorcyclerewind Both. I've seen it done and it works great on any body metal including motorcycle tanks. One more point. When I saw it done on a bike tank he put a huge stopper in the fuel fill hole and injected compressed air into the tank rather than using an inner tube like you did

@puro Жыл бұрын

Pretty cool.. one thing though. Your voice is pretty low and the music is BOOMIN

@motorcyclerewind Жыл бұрын

Apologies. I was so happy I finished editing it and uploaded 18 hours before I missed it. I will try to edit it on KZfaq. Thanks.

@jon-christiankaczor5384 10 күн бұрын

I woulda kept that yube inflated and tapped around the outer high spot of the dent with a rag over the tank and i bet it woulda popped out

@motorcyclerewind 10 күн бұрын

Thanks for the tip. I can use all the help I can get.

@davedaly5795 17 күн бұрын

As a guy who repairs dents for a living 20-plus years. That ain't how it's done. We use specialized tools and lots of experience.

@motorcyclerewind 17 күн бұрын

🤣😂🤣 please know I was not trying to insinuate I knew what I was doing. You guys are artists. I am not!!!

@burtreynolds3143 8 күн бұрын

I picked up on that from the title but I couldn't look away. I guess this guy doesn't like to see his things 'pretty messed up' so he upgrades them to just 'messed up.'

@Artoconnell 14 күн бұрын

Soapy water maybe help? . Dry rubber is bad.

@motorcyclerewind 14 күн бұрын

I bet it would help. Thanks for watching.

@Richard-gn6hw 23 күн бұрын

Use a pressure washer...you tube dirt bike exhaust pipes...

@motorcyclerewind 23 күн бұрын

Thanks for watching.

@julioalcantera9520 3 ай бұрын

Heat up the dent!

@motorcyclerewind 3 ай бұрын

That’s a great idea. Thanks for watching.

@TringmotionCoUk Ай бұрын

"You're going to need a bigger tube..."

@motorcyclerewind Ай бұрын

😂🤣😂 gonna need more than that.

@shrapnut7612 16 күн бұрын

Inflate tube, release pressure, let the tube settle just like on a car or bike.

@motorcyclerewind 15 күн бұрын

Thanks for the tip. Will definitely do this next time. Thanks for watching.

@philtucker1224 Ай бұрын

Maybe put the tire inflator tube on the valve before losing it inside the tank…

@motorcyclerewind Ай бұрын

That’s a great idea.

@ThePerfectSeason1972 Ай бұрын

Glue puller ?

@larsesilen Ай бұрын

I think using a hot glue puller is the way to go. Use a suitable custom made tool to carefully knock/help from the inside while pulling. There are many videos showing how to remove dents in cars that way.

@motorcyclerewind Ай бұрын

I like the glue puller I have.

@motorcyclerewind Ай бұрын

Thanks for watching

@TrishaObrien-os6nc 8 ай бұрын

Okay now I guess 12

@motorcyclerewind 8 ай бұрын

That’s a good guess. Thanks for watching.

@jamiestanley8774 8 ай бұрын

Ya needed some heat

@motorcyclerewind 8 ай бұрын

Gonna try adding some heat next time.

@CountCraigula 29 күн бұрын

Rusty tank? Drain it. Dry it with compressed air. Slosh acetone in it to remove any oil residue dry it again with compressed air OUTSIDE as clouds of rust will be incredible. Fill tank completely with Evaporust. Let sit for two days. Drain rinse thouroughly with water immediately dry with compressed air. Tank will be like new inside.

@motorcyclerewind 29 күн бұрын

I really like Evaporust. Does such a great job. I use the shop vac to dry tanks. Just let it blow into the tank for 30 minutes or so. Works great hands free.

@CountCraigula 29 күн бұрын

@@motorcyclerewind You can also use it to clean/flush rusty cooling systems. You can run it as coolant full strength then rinse /flush with distilled water.

@300zxdriver 11 ай бұрын

I’ve used ice to remove a dent in a motorcycle tank.

@motorcyclerewind 11 ай бұрын

I’ve heard about that. I’m gonna have to try it. Where’s my 🔨 😂. Thanks for watching.

@purebloodheretic4682 5 ай бұрын

Yeah but you'd need to very careful not to overfill it or your tank will be transformed into something that looks more like a Soccer ⚽ Ball😉

@mrseaweed5587 Ай бұрын

you could put at least 20 pounds and warm the tank. wear ear protection and goggles. no worries.

@motorcyclerewind Ай бұрын

Definitely some eye and ear protection.

@D_Grouchy_Old_Man 22 күн бұрын

Y not pressurize rhe tank without the tube?

@motorcyclerewind 22 күн бұрын

Gonna have to try that next time.

@cyclebuster 11 күн бұрын

i use cut off bicycle handlebars

@motorcyclerewind 8 күн бұрын

That’s a great idea.

@cyclebuster 8 күн бұрын

@@motorcyclerewind done it for 30 yrs

@cyclebuster 8 күн бұрын

@@motorcyclerewind done it 30 yrs, there are 100 bends of bars, get into anywhere, just put a cheap grip on and work the dents out

@cyclebuster 8 күн бұрын

honestly i used to buy dented CB750 original paint tanks, push the dents out, polish or clear them and sell them for obscene money.

@djantix1200 4 ай бұрын

I tried this method once and ruined a CL tank that was pristine inside. The inner tube pushed out the opposite side-wall from the dent side of the tank. The tank deformed and is ruined unfortunatley. Just want to offer my experience if others are thinking of trying this method. Cheers

@motorcyclerewind 4 ай бұрын

Thanks for sharing. Not sure I would do it again. Thanks for watching.

@djantix1200 4 ай бұрын

LOL, you know I won't! @@motorcyclerewind

@julioalcantera9520 3 ай бұрын

Same mistake he makes here. You forgot to heat up dent.

@iancameron198 Ай бұрын

I have a 1974 Honda ST90 AND LOOKING FOR PARTS.ANY IDEA.CAN YOU HELP.THANKS@@motorcyclerewind

@highwayman1218 27 күн бұрын

Honestly that's the result I expected to happen...

@seventiescycle6566 Жыл бұрын

that's not how you PDR. Proper tools are key.

@motorcyclerewind Жыл бұрын

I agree 100%. Thanks for watching.

@MichaelWilson-sn1yo 29 күн бұрын

A 2 liter pop bottle will hold over 100 psi so I seriously doubt that tank will rupture

@motorcyclerewind 29 күн бұрын

I did not know that about pop bottles. Thanks for sharing.

@muddywater6856 9 күн бұрын

I ripped one apart at about 30 psi. Pretty gnarly explosion. Small weak rust area in a bottom seam that was invisible. The air compresses like a spring and unloads violently.

@muddywater6856 9 күн бұрын

Those toilet cleaner and aluminum foil "bombs" in a 2 liter bottle......... I don't know what pressure they go off, but they are loud.

@dennisrohm6372 10 күн бұрын

Soap up the tube

@motorcyclerewind 10 күн бұрын

That’s a great idea. Thanks for watching.

@BBD40 Ай бұрын

the worst thing that can happen is something bad

@motorcyclerewind 29 күн бұрын

🤣😂🤣thanks for watching.

@Dean-yy6lo 22 күн бұрын

Chicken lol crank it up!!

@motorcyclerewind 21 күн бұрын

🤣😂🤣

@coolruehle 27 күн бұрын

Operative phrase: Paintless Dent Repair

@motorcyclerewind 26 күн бұрын

Yes sir. Thanks for watching.

@davet982 Ай бұрын

Used do this but my methods are to dangerous to explained

@motorcyclerewind Ай бұрын

Living dangerously🤣😂🤣

@johanndebeer5059 25 күн бұрын

Try heating the dents

@motorcyclerewind 25 күн бұрын

That has been the most consist by tip. Need to go dent a tank so I can give it a try. 🤣😂🤣thanks for sharing.

@JH1200A1 Ай бұрын

The size tube you need will not fit in the tank.

@motorcyclerewind Ай бұрын

What size tube do you think would be best?

@colinmcnally5931 Ай бұрын

At least 30psi

@motorcyclerewind Ай бұрын

Thanks for watching.

@akadog6319 22 күн бұрын

I would not go over 35-40 PSI.

@motorcyclerewind 21 күн бұрын

Thanks for watching.

@TrishaObrien-os6nc 8 ай бұрын

@motorcyclerewind 8 ай бұрын

I think the tank is a 72 or 73.

@hdman04 11 күн бұрын

@motorcyclerewind 8 күн бұрын

Thanks for watching.

@JessicaSimonson1976 26 күн бұрын

Just use extreme heat in area

@motorcyclerewind 26 күн бұрын

Heat seems like a great idea. Thanks.

@JessicaSimonson1976 26 күн бұрын

@@motorcyclerewind when metal is hot it expands

@edstimator1 14 күн бұрын

pdr in conjuction would make short work of it......I think

@lawrenceklein3524 Ай бұрын

Ill bet it explodes at about 35psi!

@motorcyclerewind Ай бұрын

The tank or the tube?

@kenmcleod8618 28 күн бұрын

PDR

@motorcyclerewind 28 күн бұрын

Thanks for watching.

@willcojak9650 13 күн бұрын

freezer

@motorcyclerewind 13 күн бұрын

Wife🤣😂🤣

@MAsWorld1 Ай бұрын

Your wife is more patient than me. I’m out!

@motorcyclerewind Ай бұрын

Thanks for watching.

@johnhelems721 Ай бұрын

Put a heat gun on it

@motorcyclerewind Ай бұрын

That seems like the bit of advice I could have used while doing it. Will definitely add heat next time. Thanks for watching.

@terrysmith8714 Ай бұрын

heat gun.

@motorcyclerewind Ай бұрын

I will try that next time. Thanks

@gizmo1252000 Ай бұрын

when will it explode .it,s an empty tank ,not c4 . calm your knickers down .

@motorcyclerewind Ай бұрын

You sound like my wife. 🤣😂🤣She tells me to stop overreacting!!! Thanks for watching.

@paulx2777 24 күн бұрын

Put some bondo on the dents and repaint the tank.

@motorcyclerewind 23 күн бұрын

Yes sir. That will get them out. Thanks for watching.

@alleyoop4465 Ай бұрын

This would have been such an easy pull with an adhesive dent puller. Turn in your soul patch and go home.

@motorcyclerewind 29 күн бұрын

Thanks for watching.

@2217Video 26 күн бұрын

2 mins to get to the point. Way too much dross to be worth watching.

@motorcyclerewind 26 күн бұрын

Thanks for the feedback

@gymshoe8862 Ай бұрын

This guy wants lots of clicks so he builds drama any way he can. I don't like being played like this.

@motorcyclerewind Ай бұрын

Any drama that was built was purely an accident. 🤣😂🤣 I am not that creative. Thanks for watching.