This 79 F250 was brought in for a lack of power. The engine was recently rebuilt and it has a HEI distributor in it. Problem appears to have been incorrectly adjusted ignition timing.
Пікірлер: 66
@RK-kn1ud Жыл бұрын
I'm impressed, Phil. Not too often you run into somebody who can troubleshoot modern electrical problems but can still recite how a vacuum/mechanical advanced distributor works. Usually it's one or the other.
@Terminxman10 ай бұрын
dude a mechanical distributor is not that complicated.
@PhillipBailey10 ай бұрын
In this area unless you are a tech in his 50s you won't have much experience with distributors or carbs. All those cars are long rusted away.
@unclemarksdiyauto Жыл бұрын
Its running good now! Don't see too many of those old trucks. A buddy just sold a 1979 F150 s/c 2wd last week. Was a project truck. We both probably wont see another for a while.
@ces439910 ай бұрын
I love good endings to troubleshooting problems. 👍🏽
@FullFaithRepair Жыл бұрын
Nice to see you working on the old girl, I'm sure that was a fun change of pace for you!
@garymahon19558 күн бұрын
Good video sir. I have an 83 F150 4.9 6 cyl, that today, really started losing power and finally quit. Had towed, Will be checking a lot of things. Thanks for the info!
@PhillipBailey8 күн бұрын
That's a completely different engine from this. Is it still using a carburetor?
@garymahon19558 күн бұрын
@@PhillipBailey Yes
@garymahon19558 күн бұрын
I thought the principles the same. Im a 70 yo shade tree lifetime learner, but not much good at electrical. I saw other videos i m learning from . I think my old coil is bad.
@PhillipBailey8 күн бұрын
Maybe fuel pump failure
@warrenmcelroy4718 Жыл бұрын
I hope you were just joking when you said 351 “Michigan”…. Please tell me you were joking
@BuzzLOLOL Жыл бұрын
Yeah, it's a 351Midland
@warrenmcelroy4718 Жыл бұрын
@@BuzzLOLOL 🤣🤣
@murf77donnelly338 ай бұрын
Lol 351 modified
@Jsf4458 ай бұрын
It's M for more compression please. Since they came with like 7.5 to 1😂😂😂
@BUILTFORDTOUGH79 Жыл бұрын
Whomever owned this truck had NO CLUE what they were doing. I like to time not only with a light, but also a vacuum gauge. Also noticed it was running hot. Oil pressure looked great though!
@thebaldmechanichardatheari1124 Жыл бұрын
That’s in my wheelhouse. Lol. Had the same timing light. Sounds good.
@Thief400 Жыл бұрын
A little old school fun, back to the basics !
@steevestgermain29655 ай бұрын
Best truck ever ❤
@microgamer54 Жыл бұрын
"351 mIcHiGaN" well educated man there
@davidarmstrong1021 Жыл бұрын
351 Modified no Michigan
@PhillipBailey Жыл бұрын
Wasn't there a 351 Windsor and a 351 Michigan built engines.
@microgamer54 Жыл бұрын
@@PhillipBailey no There's no such thing as a 351 Michigan the 351m is a modified 400 so it's 351 modified
@PhillipBailey Жыл бұрын
@@microgamer54 www.onallcylinders.com/2018/01/19/whats-difference-ford-351-windsor-cleveland-modified-engine/ tomato or Tomato it's all good.
@davidarmstrong1021 Жыл бұрын
@@PhillipBailey There a 351 Cleveland, 351 Windsor, and 351modified/400.
@bryancondrey64575 ай бұрын
335's love timing
@danman9017 Жыл бұрын
boy that give lot of memory back ,but that dura spark is good system .only problem i have seen is the 2 wire plug on the module
@Jack-ns5mn Жыл бұрын
Used to own one of those. 7.9 compression ratio and two barrel carb doesn't make much power and burns a lot of gas.
@garymahon19558 күн бұрын
I tested fuel pump. Thanks. coil is very old and i tested and itslooking weak.
@jordanboulay3780 Жыл бұрын
any can bus related tsbs for this truck?
@PhillipBailey Жыл бұрын
The closest thing to Can on this truck was the tomato soup can used for a vacuum reservoir.
@codyreynolds63336 ай бұрын
Mine started running like crap i rebuilt the carb thinking it was that cause just all of a sudden started poping and losing power on hills thats didnt do it what would cause that i bought another engine just incase but if its good i cant find my exact issues and fixes i didnt do anything other then drove it next day just started running bad dizzy is good all that idk what to try before swaping it
@PhillipBailey6 ай бұрын
It could be dozens of things, spark plugs, wires, cap, rotor, ignition coil, pickup, ignition module, timing controls, carb and finally internal engine mechanical. An ignition scope would be useful if you can find a shop with one and some one who knows how to use it. Parts swapping is time consuming and expensive. You need an old school diagnosis. The new techs won't be able to plug a scan tool into it...
@iangoolsby8 ай бұрын
What did you end up setting the initial timing to?
@PhillipBailey8 ай бұрын
I believe it was set to 10 degrees before TDC
@11TruthAssassin Жыл бұрын
Great engine ! Decent amount of torque off the line I recently bought a 77 dual barrel But I'd like to make it breath better When I bought it The air intake hose that goes from the engine to grill is missing What do you recommend? Also if I change the exhaust should I go Glass packs? Full exhaust and headers ? It's a daily driver So. Needs to be economical
@JB-dk3qc Жыл бұрын
4bbl, headers, duel exhaust and aftermarket ignition is all you'll need.
@warrenmcelroy4718 Жыл бұрын
Haha you’re expecting a 351M to be economical??🤣👏🏿🤦🏾♂️
@HVVYMETAL Жыл бұрын
@@warrenmcelroy4718 😂 yeah, mine gets about 5-6 mpg. I was thinking of doing a fule injection swap.
@warrenmcelroy4718 Жыл бұрын
@@HVVYMETAL definitely a wise move if you’re wanting to stick with the original engine, cant go wrong there. The 76 Hiboy I bought in High School got 6mpg and with the fuel gauge not working it was a bit sketchy. I had a shortened broom handle I kept with the truck to stick down in the tank as a fuel gauge but mostly I just tried to make sure to keep gas In it. For the most part it’d put $30 every single day to go to school, then work and usually a little running around which doesn’t sound too awful bad but this was about 25 years ago hahaha.
@HVVYMETAL Жыл бұрын
@Warren McElroy lol yeah, gas was 1.04 then. Gauge in my rear tank doesn't work either.
@rickyjohnson9508 Жыл бұрын
Look at that temp gauge on the bottom right corner of the dash. Wont last long at that temp
@robperkins26744 ай бұрын
Timing and vacuum is what I’d check
@RobertCline-ql4sy11 ай бұрын
Would you sell it??)
@PhillipBailey11 ай бұрын
It's not mine
@apocolypse1114 күн бұрын
If this guy just made timing videos his channel will grow. To many old idiots think they know what there doing because there old.
@PhillipBailey13 күн бұрын
@apocolypse11 thanks but I'm old too...
@treydogg77 Жыл бұрын
Pardon my southern French, but who rebuilds a 351 engine from ground up paints it slick and can’t set the damn timing on it?
@PhillipBailey Жыл бұрын
Customer paid different people to do the work...
@markkelly871410 ай бұрын
My 351 M run over 200,000 with little repairs
@CarlosBaez-gp7js2 ай бұрын
Muy bueno pero traducir en español
@mitchellmerrill84597 ай бұрын
I would give it a super tune. I have all the tools to work on it. Like a timing light. Set the choke. Be good to put a 4 barrel intake & carb . Duel exhaust. Make it run real nice 🎉 10:26
@markcole6475 Жыл бұрын
Irritates me when people use those junk Chinese HEI units ….so simple to run a stock ford distributor with an aftermarket ignition set up! Which is far superior! Appears the timing is way way off if the distributor isn’t causing the problem
@PhillipBailey Жыл бұрын
I agree. He should have kept the stock duraspark system. There was nothing wrong with it. Whoever put in the HEI setup probably used the original ballast resistance wire for power as well.
@rvbzero7 Жыл бұрын
I got my 31 4 cyl LONG STROKE idling at 200. Sounds like a horse gallop. And its awesome