great to see a fb owner im getting my first soon

Nice...... I will send you pics when I get done with mine brother

My 85 gsl-se needs to come out of the corner of the garage. I lost 3 gears in the tranny in 1999 it’s been in the garage since. I’ve had 4 rx-7 81,83,84 and my 85 lol no I’ll never sell it and this year the cover is coming off. Love the channel

i have been looking at doing some bc racing coilovers in the front, they have a different design which looks like it fits a lot better.. very interesting to see how the TTT setup works! thanks for the video 👍🏽

Yes!!! The prodigal Justin returns!!! 😅 Man you’re grinding through the car AND the content! Thank you guys!

The Rubber o-ring solution works. I used the same solution back in the nineties, and they are still on my car with no issues.

T3 normally sends these kits out with a couple of orings to fix that clearance issue

I also thought the same thing about the struts on my rx3 being blown out but there is supposed to be a little fluid where the insert slides in. Koni used to make adjustable inserts back in the day

it i were to use a coilover thing like that i would most likely just give it 3-4 high welds at two places along the length of the shock tube so it would be a tight fit where light taps with a hammer would be needed. seems a lot better than o rings

Take a look at Koni 8641-1072SPORT struts for the front. They are made for the rear of an MR2 , but fit the RX7 strut tube. Tire Rack, Summit, etc should have them in stock.

Man, I’ve always heard to stay away from T3. This video kind of reinforces that imo. I know old school mix and match guys from back in the day made shit work with o-rings. But this is a product made for a specific application. To provide rubber o rings to take out that slop is unacceptable imo. I would put a sleeve in there like you guys described and weld the fucker straight on. Or throw it away and buy BCs. I truly love mine. Insanely simple install and nice low ride height, stock geometry everywhere else.

Do you have a video doing the 5 lug conversion

How do u drop the oil pan on 85 rx7 12A to change the gasket?

12:24 a collet is what you're thinking of

Check out pac performance in Australia you have to send them your original strut but they do a mean coil over with a willwood brake setup

Hiro performance sells adjustable ones for the fb. I believe bc racing also

Rad, I love your videos man! I have a question, does the spindle mount come off the bottom of the strut?

Run 15x9 0 offset wheels. 1/4 to 3/8wheel space in front with some negative camber.. Instead of welding a support ring for spring adjuster you could use a split collar camp. I used that common way because I wasn't able to weld back then. Did you put urethane bushing in your trailing arms.? They will bind to the point of bending the arms and tear up the bushings. Drag car your fine with it.

ground control sells a complete coilover system for all model rx7s, 2,000 for the kit but it might be worth looking into if you aren't satisfied with your setup

🔥🔥🔥 brother im.looking for a Gsl-Se wheels if you have a set of 4 let me know

Do you ever press your own rotor/stat bearings? I'm about to do it myself since I got quoted the price of the tools for the job itself lol. Any tips?

Why not use a single bolt on 25mm wheel spacer rather than stacked slip on spacers?

What's that's rear wheel/tires size?

Man you got my vibrant muffler and now my direzzas your stealing my whole set up

bc racing has a much better solution for first gen coilovers. The vargas brothers install them on their drag car during season 2 of build and battle.

You painted the window frames red...............