1980's Italian Vespa Restoration

1980's Italian Vespa Restoration - Bare Metal Finish

Рет қаралды 16,193

11 ай бұрын

The full body and engine rebuild on a #piaggio #vespa PK 50 from 1986. This nut and bolt #restoration will have the look of a DMC DeLorean from Back To The Future due to the bare metal to clear coat finish.
Camera work of the end result:
@Ramonhofstede (Instagram)
/ ramon_890r
All parts are bought at;
www.deklassiekevespafabriek.nl
/ deklassiekevespafabriek

Пікірлер: 54

@corner.custom 11 ай бұрын

What are your thoughts on the end result? And What kind of build should be next? Please let me know down below

@kz6fittycent 11 ай бұрын

Great video man! Next build: RD/RZ350 or a GT500?

@corner.custom 11 ай бұрын

@@kz6fittycent Thanks man! Good candidates! But I'm wanting to do a bike with a little bit more CC this time, a little bit heavier 💪

@victorhawkins3461 6 ай бұрын

As someone who proudly owned a Vespa ET2 50cc, I thought the build -- at first -- was a bit over the top for a mere 50cc. But, damn, she is one truly fine scoot! Great, great job!

@corner.custom 6 ай бұрын

Thanks 👍🏼 I still have second thoughts on keeping it a 50cc, little bit more power would be cool 😎

@gewasse 11 ай бұрын

Beautiful restoration! 😍

@corner.custom 11 ай бұрын

Thanks!

@Cochise6-6-6 11 ай бұрын

Beautiful build brother, love your dedication and craftsmanship.

@corner.custom 11 ай бұрын

Thanks, always great to hear!

@guilahernandez5577 11 ай бұрын

Great job!👌👌

@corner.custom 11 ай бұрын

Thanks!

@broderickmiller4241 11 ай бұрын

Nice restoration! It would be great if you can make a video showing the before and after and any performance gains from the improved engine.

@corner.custom 11 ай бұрын

Thanks!! I'll post some more content on my Instagram page, Corner.Custom. There aren't really noticeable power gains, but it's running way better. Before it would hardly run idle and get up to RPM, that's the main improvement

@ZM4-978 11 ай бұрын

Wat n werk, erg mooi geworden en knap gedaan 👌

@corner.custom 11 ай бұрын

Bedankt 👍🏼

@DoekeFaber 11 ай бұрын

Nice work! 🔥

@corner.custom 11 ай бұрын

Bedankt Doeke 👊🏼👍🏼

@williamllorens2141 5 ай бұрын

Beautiful work ❤❤❤

@corner.custom 5 ай бұрын

Thanks man 👌🏼👍🏼

@Rmonn1989 11 ай бұрын

Lovely restoration mate

@corner.custom 11 ай бұрын

Haha looks who's there 😁🤌🏼👍🏼

@TheBurriagas 11 ай бұрын

Awesome man!!!

@corner.custom 11 ай бұрын

Thanks 🤟🏼🤟🏼

@tomvoxx4082 11 ай бұрын

Nice restoration.

@corner.custom 11 ай бұрын

Thanks man💪🏼👍🏼

@pgiannikos 8 ай бұрын

this period i am trying to restore a pk 50 ss and i am trying to achieve the same result exactly! nice... the only difference is the products you use. very nice idea and very nice restoration! wanna se more pics

@corner.custom 8 ай бұрын

Thanks. Unfortunately it's already starting to rust underneath the clearcoat. I'm thinking about stripped the body back to the metal again and go for a bright color. Not sure on that though 🤔

@pgiannikos 8 ай бұрын

@@corner.custom wow.... is there any other option like a clear primer? or epoxy primer with no colour? maybe the rust stabilization varnish you use underneath the frame could do the job.... and after this one aply the clear laquer... maybe this could work

@corner.custom 7 ай бұрын

@pgiannikos I searched for it and couldn't really find an alternative. The only other option I can think of it spray it in with WD40 and maintain it

@ryszardmetrak2390 11 ай бұрын

Gorgeous build ! Your works is fantastic. Maybe Honda African Twin next or Honda cbr 600 made into scrambler (could be cool) ? :)

@corner.custom 11 ай бұрын

Appreciated man. I'm looking forward to get my hands on something bigger for sure, especially after the little Vespa 😅

@oleksandr50special 2 ай бұрын

Great job! But not without questionable moments.

@corner.custom 2 ай бұрын

Tell me, I'm all ears. What's the problem

@demetrioskondylas8631 Ай бұрын

howdy! what air pressure did u use on the gun when you did the paint?

@corner.custom Ай бұрын

Around 20 PSI

@timcolijn9831 4 ай бұрын

Echt prachtig, heb zelf uit Spanje een 125 pk 125s gekocht vorig jaar. Zitten best wel wat dingen op en aan waar ik wat aan kan doen, waar heb jij de meeste onderdelen vandaan?

@corner.custom 4 ай бұрын

125! Dat klinkt goed 👌🏼 Zeg niet dat ik spijt heb om de 50cc op te knappen, maar verlangen wordt wel steeds groter naar meer power. Heb alle onderdelen bij De Klassieke Vespa fabriek vandaan. Goede service, top gasten!

@timcolijn9831 4 ай бұрын

Thanks voor je reactie! Ik heb nu eea besteld Sip scootershop. Ik ga hem van de week uit elkaar halen, ik ga voor donkergroen, hij is nu oranje maar ik denk wel overgespoten ooit. er zit geen roest aan, maar al met al toch wel aardig werk. Wat een werk heb je gehad en dan ook nog alles filmen. @@corner.custom

@user-kq7xw7gs6s 3 ай бұрын

Italian made two stroke Vespa, which year had electric start?

@corner.custom 3 ай бұрын

Good question bud. Honestly I don't know, I'm not that deep into the whole Vespa thing

@hnguyen8385 Ай бұрын

How do you open the side panels. Just bought one and can’t figure how to open the panels😢

@corner.custom Ай бұрын

Haha I feel you man, I had the same struggle. Underneat the seat you'll find on both sides of the fuel tank a plug that need to be pulled up. Then you can open the side panels

@delaereveronique6132 11 ай бұрын

Merci de partager tes sensations fais attention à ton dos gros bisous 😘

@corner.custom 11 ай бұрын

You're welcome 👍🏼

@ZM4-978 11 ай бұрын

Uhh volgend project BMW R75 met n Seip zijspan 😎

@corner.custom 11 ай бұрын

Geloof dat ik dan eerst de loterij moet winnen 🤑😅

@ZM4-978 11 ай бұрын

@@corner.custom aaah, je maakt wel hele mooie projecten, top 👍

@corner.custom 11 ай бұрын

Bedankt! Zal wel weer een BMW worden voor een nieuw project 😁🤟🏼

@Aikaramba12 8 ай бұрын

Brunox is trash, i would just go for a regular 2k epoxy primer

@corner.custom 8 ай бұрын

Thanks for the heads up 👍🏼👌🏼

@Aikaramba12 8 ай бұрын

@@corner.custom no problem :) the 2k stuff is a lot better imo.

@corner.custom 8 ай бұрын

@Aikaramba12 yes sure is. Normally I don't worry with 1k stuff, but this I had laying around. Eventough with the 2k clearcoat it already started rusting underneath it 😟