1987-89 TOYOTA PICKUP/4RUNNER NO CRANK STARTER RELAY FIX

Рет қаралды 3,485

5 ай бұрын

Amazon link to relay I used
irhapsody 4-PIN 40/30AMP 12V DC Waterproof Relay with Harness - Heavy Duty 12 AWG Tinned Copper Wires, 1 Pack SPST Automotive Relay a.co/d/cQpFOv8
inline fuse holder
Bussmann BP/HHG-RP Heavy Duty In Line ATC Fuse Holder with Cover (32V/30A #12 Wire Leads), 1 Pack a.co/d/iq8qkcl
crimp connectors
Limited-time deal: Kuject Heat Shrink Wire Connectors, Multipurpose Waterproof Electrical Wire Terminals kit, Insulated Crimp Connectors Ring Fork Spade Butt Splices for Automotive Marine Boat Truck (200PCS) a.co/d/dQ4xllT

Пікірлер: 19

@chrishanna3422 3 күн бұрын

Ordered everything and cranked right up. Thanks buddy

@archaicautomotive2444 3 күн бұрын

@@chrishanna3422 no problem, I'm glad it helped you out!!!

@beverlyaustin924 8 күн бұрын

I have an 86 toy base, 5spd rwd. I also had the no click start problem. Did the wire by pass method n no starting issues since the install.

@JoseMarin-ww3ws 12 күн бұрын

Coolness!

@sc0mer 2 ай бұрын

THANK YOU for posting this. I just did it and you saved me a lot of grief.. :)

@archaicautomotive2444 2 ай бұрын

Of course! Glad it helps! 🙂

@octaviochavez4085 3 ай бұрын

I’ve tried running the wire directly to the harness and it worked. However, it’s more of a temporary solution because I started having the same problem again after about 2 years. I am now looking for a more permanent solution but I am also reluctant to get a ford relay in there. This looks like a great idea and it looks very clean and factory. Thank you for sharing!

@archaicautomotive2444 3 ай бұрын

Glad it helps! I've had this set up for a couple years now and have not had a problem.

@JimGiddens3 5 ай бұрын

Great video. Thanks for sharing this.

@archaicautomotive2444 5 ай бұрын

Thank you!

@JamesNealon-b5h 6 сағат бұрын

Man I feel like the dumb guy but the battery wire hooks directly to the pos on the battery?

@Ryan-ji5kw Ай бұрын

So if I already cut the harness and ran it to the battery, would I just keep that then just cap the red wire if I were to add this relay?

@archaicautomotive2444 Ай бұрын

Yes or reconnect it when you cut it from.

@aerialrescuesolutions3277 5 ай бұрын

Very cool, nice and tidy. How do you like the Weber? When I changed mine, it was night and day, I did put the Offenhauser intake on though, and a dual-row chain. JIm

@archaicautomotive2444 5 ай бұрын

Thank you Jim! The Weber works great I like it a lot more than the stock carb, It does have a little bit of issue at high angles when I'm off-roading but other than that it works really well.

@aerialrescuesolutions3277 5 ай бұрын

I heard they don't like elevation changes( going from sea level to 7000 ft up? I've not driven up into the mountains.@@archaicautomotive2444

@archaicautomotive2444 5 ай бұрын

@@aerialrescuesolutions3277 It's usually not too bad unless I'm going up a real steep incline. There's actually a modification that you can do to the Weber that relocates the fuel bowl vent to correct that issue. Maybe I'll cover it in an upcoming video.

@aerialrescuesolutions3277 5 ай бұрын

That would be great.@@archaicautomotive2444

@drewfleming7065 5 ай бұрын

Got a 38mm Weber on a LCE stage 2 stroker..(160hp).Only problem is it blows up G and W transmissions...had to find a R151F and it cost me big along with a V6 diff....Anyone installing a Weber remember they only need 2.5 to 4 psi fuel pressure(OEM pump is 7 psi), anything more and they run very rich and cant tune... Before you cut up any wires make sure the rely is totally bad, Ive opened one and cleaned the contacts and fixed it....