1988 Mack CF Fire Engine Restoration | First time Pumping in 10 Years!

Рет қаралды 33,919

3 жыл бұрын

In this episode, we pump water with the truck for the first time in more than 10 years. The engine was sold by the city around 2010, but before that it sat outside, untouched, for an unknown amount of time. We fill the pump and drain all the dirt, rust, and sediment, and are able to flow some water! Follow along and make sure to stay tuned for the next episode.
As always, thanks for watching!

Пікірлер: 31

@Robertmacmedia Жыл бұрын

Great video enjoy the old apparatus

@SeanGilmore92 Жыл бұрын

Thanks!! Stay tuned for another video soon, we're gonna draft with it and really move some water

@jaredthompson3011 3 жыл бұрын

This truck is coming back to life! Great work guys!

@user-wc8lf5km8k 3 жыл бұрын

You guys are doing a good job. Old vehicles can be tough to restore.

@SeanGilmore92 3 жыл бұрын

Thanks a lot, we appreciate the support!

@chief1945 Жыл бұрын

Looks like a Hahn body. Hahn built the bodies for Mack back in the day. Mack in Allentown PA and Hahn in Hamburg PA, not that far away from each other. The pump panel gives it away, thats a Hahn pump panel layout. Gezzzz, so simple to operate unlike todays nightmare rigs. KISS ..Keep It Simple Stupid ... where did that go?

@SeanGilmore92 Жыл бұрын

Amen to KISS. But its a Ward 79 Ltd body with a Hale Pump.

@johnmcdermitt1693 Жыл бұрын

THAT MACK GROWL!!!!! 😍😍❤️❤️

@MidwestStormSpottersLeague2015 3 жыл бұрын

That's exactly what Taco Bell will do to you! Great video guys! Enjoying the progress on this engine!

@zekefleming1 3 жыл бұрын

You are correct to have the tank fill and tank to pump open sense you aren’t flowing water actively but to build pressure easier you need to have the tank fill about 1/2 way closed. It’ll build pressure at a much lower RPM

@kellyhoganhpadventures 3 жыл бұрын

Put some Palmolive dish washing soap in the tank and work the pressure governors and valves, that will make the work easier

@SeanGilmore92 3 жыл бұрын

Sounds good, thanks for the help brother!

@adamf9000 3 жыл бұрын

That’s some great progress! I passed you driving it on Monday it looked good !

@SeanGilmore92 3 жыл бұрын

Oh awesome man! Had to grab lunch, why not take the engine 🤷🏼‍♂️

@adamf9000 3 жыл бұрын

any reason to take the engine for a ride is a good reason!!

@MrJeep75 11 ай бұрын

Awesome

@jamiecroll9303 3 жыл бұрын

Who wants a mustache ride ?! Lol !! Great job brothers! Only question is where you at a rifle range?! What was all that banging ?

@EmergencyReporterSRB 3 жыл бұрын

Great job!

@SeanGilmore92 3 жыл бұрын

Thanks!

@danielcapo1991 2 жыл бұрын

That’s so cool

@richardscott2622 2 жыл бұрын

If you want the rust to disappear fill the pump with distilled water and circulate the pump cap the valves and open need approximately 60 gal..

@floridamancomedy3151 3 жыл бұрын

Hey i don’t know if your interested i have a 1991 pierce arrow 95Ft aerial platform for sale truck has 20k miles 3k hours on engine 1k hours on aerial 68 pump hours I’m in Montgomery county pa, everything works perfect

@emergencyresponsevideosand4423 2 жыл бұрын

The guy slamming something sounds like music

@michaelburik1361 3 жыл бұрын

The gauges probably aren’t broken. Those little thumb screws basically turn the gauges on and off

@SeanGilmore92 3 жыл бұрын

Wow...that makes complete sense now, thanks for the help!

@juliandp1768 3 жыл бұрын

put it in pressure mode, relief valve closed and tank to pump opened

@johnmcmickle5685 3 жыл бұрын

Well it was a well built engine.

@SeanGilmore92 3 жыл бұрын

Very Well built!

@johnmcmickle5685 3 жыл бұрын

@@SeanGilmore92 My only problem is all those solenoids. The volunteer fire department of which I am a member had an FMC fire truck built on a Ford chassis, it had lots of solenoids and if one went bad it shut everything down.