one of the cleanest build Ive ever seen. big inspiration
@SloppyMechanics Жыл бұрын
this is a really nice build! awesome job!
@BoWhiteRacing Жыл бұрын
Thank you. I need to install a back pressure sensor so I know when the 78/75 is out of its efficiency range. It has the 1.25 exhaust housing. I’ve only had it up to 20 psi. Have you maxed one out? I know this will vary based on the set up and how much back pressure is in the hot side. Love what you do, thank you for the kind words.
@SloppyMechanics Жыл бұрын
@@BoWhiteRacing the biggest 7875 i have done 930whp with and never again haha most are in the 800-880 range maxed (locked 80e)
@chvyxtreme Жыл бұрын
Great overview. Only thing I didn't hear was how much boost pressure to run the 5.80. Awesome clean simple setup to run that fast
@BoWhiteRacing Жыл бұрын
It was 15 psi then I hit the scramble and it went to 18 psi in high gear.
@wadebonhomme2142 Жыл бұрын
You have made a bunch of changes, appreciate you going over the current setup!
@BoWhiteRacing Жыл бұрын
Plan to make a lot more this winter. Thank you.
@georgefletcher80143 ай бұрын
How is the wastegate with it mounted/welded to the housing any cons with that setup?
@BoWhiteRacing3 ай бұрын
Only thing is is if you swap turbo you have to redo it and it’s hard to sell a turbo with a hole in it. But it works great.
@BigMikesGarage10 ай бұрын
Great job with the build. Very tidy.
@CherryBombZ284 ай бұрын
I might’ve missed this part but what kind of brakes front and back?
@BoWhiteRacing4 ай бұрын
Stock.
@CherryBombZ284 ай бұрын
@@BoWhiteRacing That’s with rear drum brakes right? Any stopping issues?
@BoWhiteRacing4 ай бұрын
@CherryBombZ28 yes rear drum breaks. And I didn’t have anything issues stopping.
@alcoatornado2749 Жыл бұрын
Bo,...... you running a manual steering box? Thank for the great video and break down of the truck.
@BoWhiteRacing Жыл бұрын
Yea it was on the truck when I got it. I want to swap it for a steering rack.
@88_turbo_fox73 Жыл бұрын
Nice job bro
@BoWhiteRacing Жыл бұрын
Thank you.
@nassergarcia18876 ай бұрын
Hello friend, I need your help, please, I am currently doing the same project, completely the same down to the same camshaft. I need help, could you tell me what headers to use for your project?
@BoWhiteRacing6 ай бұрын
The driver side is a eBay LS swap header and I made the turbo log.
@1818saul Жыл бұрын
What a sweet build!! Thanks for sharing all the info on such a cool truck!
@ChristianHernandez-vm2fk6 ай бұрын
Are they the stock lifters & oil pump ??
@BoWhiteRacing6 ай бұрын
Yes.
@tristenoberlender96859 ай бұрын
What did it take to mount that driveshaft and rear 8.8 diff?
@BoWhiteRacing9 ай бұрын
This is a 8.5” so just a stock ujoint.
@Gabe_Z31 Жыл бұрын
Dope ass build brotha 💪🏽 question I pretty much have the same setup but about to swap to a th400 from a t56. First time having an auto, I was wondering if all the pressure sensors are a must have I know I need a temp sensor for sure. Thanks brotha
@BoWhiteRacing Жыл бұрын
Thank you. The sensors are nice to have but it’s not a must. I just like to have as much data as possible.
@jgilyard461711 ай бұрын
Did you gap the rings on the pistons??
@BoWhiteRacing11 ай бұрын
No. This block had a lot of rust in the cylinders so I just cleaned that up and sent it.
@YoungerPrice11 ай бұрын
How do u have ur catch can routed?
@BoWhiteRacing11 ай бұрын
I have the passenger side going to the oil fill cap and the drive side goes to the old vent on the back of the valve cover.
@dtperformance256 Жыл бұрын
Did you convert the truck to a manual steering box?
@BoWhiteRacing Жыл бұрын
I didn’t. It had it went I got the truck I’m guessing it came stock that way but someone else could of swapped it before I got it.
@kevinlarrick3285 Жыл бұрын
That is one nice piece !! You have great job on the S-10
@BoWhiteRacing Жыл бұрын
@@kevinlarrick3285 thank you.
@kevinlarrick3285 Жыл бұрын
@@BoWhiteRacing you’ve done one nice job with that truck. I have a 2010 with a big block in it it’s just an old hot rod just something to cruise around but you’ve done a really nice job with a truck.
@BoWhiteRacing Жыл бұрын
@@kevinlarrick3285 thank you. I’m trying to make it go 5.5 in the 1/8
@Cheap011 ай бұрын
Simple .fast .and not breaking the bank .badass truck man you know how much it weights?
@BoWhiteRacing11 ай бұрын
Right at 3000 lbs
@terrywitzel6722 Жыл бұрын
what water pump are you using?
@BoWhiteRacing Жыл бұрын
Stock truck water pump.
@terrywitzel6722 Жыл бұрын
@@BoWhiteRacing did you modify it my pump comes from the top
@terrywitzel6722 Жыл бұрын
I watched the video again you shortened the tube right
@BoWhiteRacing Жыл бұрын
Here is the link to the one I got. It has a short neck not a long one. www.ebay.com/itm/284460838064?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=Tk9jWpUFTIy&sssrc=4429486&ssuid=KIGSMUX4SoW&var=&widget_ver=artemis&media=COPY
@hotrod76.10 ай бұрын
How much u got in all this swap.?
@BoWhiteRacing10 ай бұрын
Well I traded a turbo LS S10 for this truck and then sold the SBC and build it for around $10,000. Then I sold/traded this truck for a S10 I’m building now.
@hotrod76.10 ай бұрын
@@BoWhiteRacing cool. I'm trying to decide the way I want to go. Sbc or ls.
@BoWhiteRacing10 ай бұрын
@@hotrod76. both work just depends on what you want. To be honest if I was going to do nitrous is do SBC.
@hotrod76.10 ай бұрын
@BoWhiteRacing I just want a nice little street truck to play with. Don't really want to mess with a tune or all the wiring for a ls. I like to do a 400 sbc. 350 turbo. Good gear.