1993 OBS Chevy | LS Swap

1993 OBS Chevy | LS Swap | Part 2

Рет қаралды 27,657

2 жыл бұрын

Part 2 of swapping the OBS Chevy.
I throw in some tips on cheap gauges and using the stock harness for oil and water temp sensor.
You can follow me on Instagram @ KrustyCuda

Пікірлер: 55

@Ronjovi77 Ай бұрын

Nice wrap job on the Cuda headers 👍

@lordactive6090 Жыл бұрын

Thank you for this video you confirmed a lot of little stuff I want to sure about doing these swaps!

@perifera1 Жыл бұрын

I use oem 93 oil sensor with adapter or I've used oem oil sender for LS for obdII and a added oem 93 oil sensor on side of motor above filter. On coolant I use a 98 camaro sensor (3 wire) and just added 1 wire for guage on dash.

@chadgardee1496 2 жыл бұрын

That older ls oil pressure sensor does work on the original obs harness I jus did one

@felipearzola7288 Жыл бұрын

Thanks gor all the info you answered alot of questions in detail

@chadgardee1496 2 жыл бұрын

What’s up Anthony like the content man keep it coming

@Horner181 2 ай бұрын

I ain’t mad at all u lol I’m trying to swap everything 😂 washer goes out? No problem,need a little pep on granny’s scooter no problem!

@tylorhead2190 Жыл бұрын

Buying a motor and harness and stuff and the shop said they will put it all on for 1565

@tylorhead2190 Жыл бұрын

93 k1500

@bigtonyself 6 ай бұрын

Where

@WilliamJenkins-tx5jr 5 ай бұрын

I've been reading a ls swap book for about a week or so. It says in the book it's not a good idea to use the factory lines even if they are metal like that because the tbi lines are only use to pushing 12psi of pressure, where as the LS efi system pushes 58psi. I've never tried it before, I'm just going off what the book said.

@alvinfisherii1341 2 жыл бұрын

Bruh you should drop the link for the hot rod mag article for the cuda!!!

@synisterfab Жыл бұрын

Doing a similar swap on a 90 step side but it's getting a 6.0 with a 5speed

@terrellgaines88 2 жыл бұрын

Did he sell the bell housing off the old transmission?

@eugeneowens82 Жыл бұрын

Subscribed instantly....bro i know that aint no LS in cuda...i have a 72 duster i want to try it...is it complicated...i need an LS book for dummies...

@krustyclassicsgarage Жыл бұрын

It sure is. Its my daily driver. Get in the group "LS swapped Mopars" on facebook. Quite a few swapped dusters in there

@AnthonyIngmire 9 ай бұрын

Where are you located ? I stay in around Austin area curious about a 6.0 lq4 build on my 91 obs with the original 350. I’m new to this & just wanting a reliable daily driver nothing crazy. But just got a lot of questions

@juliandominguez4404 4 ай бұрын

Great videos good info but no one shows how to hook up tcc and neutral saffy switch set up and how to wire it

@krustyclassicsgarage 4 ай бұрын

That has nothing to do with the swap itself. That's dependent on the vehicle itself as the switch isn't touched for a swap

@raynaldolopez3780 7 ай бұрын

I literally just watched a video of you and I wanted to ask for your opinion . I’m from the valley/RGV in Texas . Everything is so expensive that’s related to motors. Which engine would you recommend me getting ? A 4.8, 5.3, 5.7, or a 6.0 ? And what generation ?

@raynaldolopez3780 7 ай бұрын

I just got a 97 ck1500 2 months ago and I wanted to start buying piece by piece so I can hopefully put it together by the end of next year.

@juliandominguez4404 4 ай бұрын

Oh ok thanks good info

@oppgarage748 2 жыл бұрын

Are you going to drop that 12v in that red power wagon?

@krustyclassicsgarage 2 жыл бұрын

It's already got one. 92,12v, 4x4, 5 speed.

@IvanGarcia-xy8kr 2 жыл бұрын

How much would it cost if I let a shop do this ls swap ?

@krustyclassicsgarage Жыл бұрын

Theres no telling. Could be anywhere from 5-20k. All depends on the shop, their rates, the parts you want, what all you want done, etc.

@TOMVUTHEPIMP Жыл бұрын

My local shops start at $10K.

@Synthfidel Ай бұрын

Hey man, what part of Texas are you in?

@butler4719ify Жыл бұрын

How did you do with fuel tank with the return line the ls 5.3 ?

@swampchickenfxr779 Жыл бұрын

Fuel pump for a 96-98 with a 5.7 Vortec will have a return line fitting. Should drop right into the stock tank

@bruceshepard1136 2 жыл бұрын

1998 Camaro oil sensor is the one that will work

@krustyclassicsgarage 2 жыл бұрын

Awesome. Thanks.

@amosvaldez5125 2 жыл бұрын

Good work I’ve got a 1993 k1500 step side I wanna drop a Ls in anybody have suggestions and advice on what motor to use any advice would be appreciated new to mechanics thank you.

@krustyclassicsgarage 2 жыл бұрын

If you're new, any Gen 3 LS. 99-early 07. Check out my previous videos.

@amosvaldez5125 2 жыл бұрын

@@krustyclassicsgarage thank you looking forward to seeing the rest of this build🤝

@amosvaldez5125 2 жыл бұрын

@@krustyclassicsgarage another question I was thinking of a ls1 01 with a 4L80e transmission are these compatible?

@TOMVUTHEPIMP Жыл бұрын

@@amosvaldez5125 If you're asking these questions you're not ready for a swap.

@JoseGarcia-jp8gs Жыл бұрын

I just got my transmission built a month before my motor blew, and now i have a 6.0 ready to get put in. Would it be too hard to get to work with the new computer?

@TOMVUTHEPIMP Жыл бұрын

Use a carb and throw all the electronics in the trash.

@rmmm6725 Жыл бұрын

@@TOMVUTHEPIMP that’s a stupid idea. Guy is putting a 6.0 LS in and you want him to run a carb??? You must drink that bleach in the pic

@TOMVUTHEPIMP Жыл бұрын

@@rmmm6725 What wrong with a carb? LOL. You clearly know 0 about them.

@TOMVUTHEPIMP Жыл бұрын

@@rmmm6725 You clearly know jack squat about carbs.

@swampchickenfxr779 7 ай бұрын

If it's 96 or newer, the trans should work with the LS pcm

@Thomzombie303 Жыл бұрын

Another great video, thanks for the info. Quick question, i want to LS a 1990 OBS (will pick it up in a couple weekends) all the things you mention in the begining, the inline fuel filter /transmission etc. does that apply to the 90 OBS, or is it to early compared to that 93 you did? Oh and also, will all the front accessories from the efi 350 bolt up to the LS?

@krustyclassicsgarage Жыл бұрын

90 shouldn't be any different than 93. I believe they didn't start the 4l60e until 93 but I could be wrong. Im not well versed in these trucks specifically. But fuel system, headers, etc should all be the same for a 90yr model. The original engines accessories won't work on the LS brackets unless you do some customizing of the bracket itself. Thats why its best to get the LS engine 100% complete.

@Thomzombie303 Жыл бұрын

@Krusty Classics Garage thanks alot for your reply, so awesome to get some answers

@joblo2299 6 ай бұрын

Wat was ur bill on all that