1993 YZ250 Dirtbike Restomod Build Time Lapse
Рет қаралды 22,273
2 жыл бұрынThis build started in Dec of 2020 and finished in May of 2021. It was the first full bike build I have ever done. The idea was to take a classic bike and modernize it a bit with newer suspension and a freshly rebuilt motor. I had such a great time building this bike and learned so much while doing so. This bike is definitely no trailer queen and gets ridden often. Be sure to follow me on instagram (Next_Project_AZ). I have documented this build in much more detail and have linked the videos below.
Check out Factory Edge (my motor builder) on factory_edge
Check out CM.Off-road for parts and vapor blasting cm.offroad
Links to more detailed videos of this bike build:
1993 YZ250 Build: Part 1 | Wash and Tear down
• 1993 YZ250 Build: Part...
1993 YZ250 Build: Part 2 | Motor disassembly
• 1993 YZ250 Build: Part...
1993 Yz250 Build: Part 3 Powder Coating and Color Scheme
• 1993 Yz250 Build: Part...
1993 YZ250 Build: Part 4 KYB SSS Fork Swap
• 1993 YZ250 Build: Part...
1993 YZ250 Build: Part 5 Motor going back in the bike
• 1993 YZ250 Build: Part...
1993 YZ250 Build: Part 6 Modern Brakes from a 2006 YZ450F
• 1993 YZ250 Build: Part...
1993 YZ250 Build: Part 7 Keihin PWK Carb
• 1993 YZ250 Build: Part...
1993 YZ250 Build: Part 8 Linkage and Swing Arm Rebuild
• 1993 YZ250 Build: Part...
#dirtbike #restomod #yz250
@Thepianobird 3 ай бұрын
wow sss forks on a 93? thats wild!!!
@zago2 5 ай бұрын
i have got one 92.....im getting ready these years were the best bikes
@NextProjects 5 ай бұрын
I agree! I have an aluminum frame bike that just collects dust now!
@strangeblocks5756 2 жыл бұрын
just bought one of these for 500 bucks. runs and all. gonna run it till it blows and prob restore is the goal thanks for inspiration
@ls1_cammeroh 2 жыл бұрын
Wish I could find one for 500 bucks
@strangeblocks5756 2 жыл бұрын
@@ls1_cammeroh got really lucky was best friend. he just let it sit for years and years. i rode it more then him in 2 years and that was only 3 times. then one day he said make offer. i said 5 he said deal. should have said 300 ahahahah
@ls1_cammeroh 2 жыл бұрын
@@strangeblocks5756 you’re so lucky everyone in my area wants an arm and a leg for one
@theaustralianconundrum Жыл бұрын
@@strangeblocks5756 If you spent 500 bucks then running it "till it blows" sounds like a real plan. LOL. If you're lucky you'll destroy the top end and then the crank and gearbox can get all wrecked as well. That should be around $2,000 right there to replace all of that if it isn't too far gone.
@christopherharoldson9808 2 жыл бұрын
Turned out sharp 👌, looks like a fun project.
@tomatoknuckles 2 жыл бұрын
Turned out mint 👌 great job man.
@NextProjects 2 жыл бұрын
Thanks 👍
@thomashenry890 2 жыл бұрын
Looks mint!
@wrenchwise1529 Жыл бұрын
Great job, getting ready to restore my 94
@NextProjects Жыл бұрын
Thanks! Good luck with your resto!
@theaustralianconundrum Жыл бұрын
@@NextProjects Restoring MX bikes make no sense as they get roached as soon as you ride them again.
@fernandoespinoza52 2 жыл бұрын
Como cree no movieran tanto el video oara así poder observar el trabajo tan bueno que hacen
@user-dp3bs9qq8m 2 жыл бұрын
yesssssssss wery good nice👍👍👍💪💪💪
@elishaandruschenko1730 Жыл бұрын
love it
@iipriorii 2 жыл бұрын
Very nice. Some more footage of it would be nice
@NextProjects 2 жыл бұрын
There a whole detailed build series on this bike on my page.
@theaustralianconundrum Жыл бұрын
@@NextProjects You put Tagasako "signature" Excel rims on that thing? How much was the total spend including initial purchase?
@kyleprintz6471 2 жыл бұрын
What size hoops did you end up putting in?? Are they Excels?
@cassarj76 Жыл бұрын
I’m curious to where you ran your throttle cable to the carb ,
@brianhansen1363 Жыл бұрын
Bike came out great where did u get the tank graphics
@NextProjects Жыл бұрын
Ebay lol
@Solihull.landscapes Жыл бұрын
I have a 93/94 yz 250 needing resto but I'm wondering if you guys can advise on how or where I can get headstock bearing to convert my cr500 triples with 2010 CRF triples
@kanesaw7456 11 ай бұрын
Clarke tanks i think make the YZ tank. Thats the WR tank. Will look alot better with the tank. I have 2x 94 yz. great bikes
@NextProjects 11 ай бұрын
Thanks! I'll be ordering one
@toskitomunoz8129 Жыл бұрын
What adjustment knobs are those??
@rinusdemeyer 2 жыл бұрын
Looking sweet! Currently busy with the exact same model, got some great tips from your build, one question? Did you leave the rear shock standard? If so, do you know if a '06 will fit?
@NextProjects 2 жыл бұрын
The rear shock is not standard. I put the 06 yz450f rear shock in, direct bolt in. No mods needed. 👍
@Solihull.landscapes Жыл бұрын
I'm assuming 06 to 09 yzf250/450 rear shock are similar .. will fit my 93/95 yz250 ,, is that correct lads or not , please advise
@theaustralianconundrum Жыл бұрын
@@Solihull.landscapes The 4 strokes are much heavier than the 2 strokers. I'd just buy a genuine OEM for your year bike. There are plenty of them around if you look for them.
@laker626 Жыл бұрын
Where did you get your stickers at?
@noahwiggins8746 Жыл бұрын
How did you source a cylinder for this bike please and tanks ready to freshen my 93 can’t find anything on the cylinder
@NextProjects Жыл бұрын
I used the original cylinder and had it bored over
@horseyy_edits7442 2 жыл бұрын
Looks like a WR fuel tank. Too big to be a YZ?
@NextProjects 2 жыл бұрын
Ya, I think you are right
@TheOnlyRealVeniVidiVici Жыл бұрын
Id like to buy it when your ready to let go😂
@strangeblocks5756 Жыл бұрын
how did you get clutch tight enough??? please help. bought motion pro cable was tad longer. so bought oem and def shorter. but still way to much slack. got new perch also. any advice? thanks
@NextProjects Жыл бұрын
I bought an adjustable perch from pro taper and that helped. Hope this info is helpful!
@strangeblocks5756 Жыл бұрын
@@NextProjects yeah i went that route too. got same one i think you do in video. made a post on thumpertalk with pics if interested. no clue how owner had in working before me. but thank you so much
@jakicastano1824 2 ай бұрын
Hello, good video! I wanted to ask you what country you are from, I'm from Argentina! I have one of those 1993 YZ 250 motorcycles and I can't find spare parts, I wanted to know if there is anything in your country
@NextProjects 2 ай бұрын
I am in the USA. What parts are you looking for?
@jakicastano1824 2 ай бұрын
@@NextProjects Here in Argentina, unfortunately, I can't get those gears, first speed... nor the set of gaskets to reassemble the engine... it's the only thing I'm missing but I already searched all over my country.
@paulpaul5606 Жыл бұрын
Me like
@mathewbolton30 Жыл бұрын
U wanna do my 1989 yz 250 wrw I’ll pay u good
@marjorieevans4076 Жыл бұрын
Could at least started it up
@theaustralianconundrum Жыл бұрын
Waste of time and money. Plus it looks horrible. Next time restore one to stock with all OEM parts from 1993 and you will have a nice collectable to keep in your man cave.
@carter.coleman Жыл бұрын
I think his goal was modern bike but still keeping the old styling
@theaustralianconundrum Жыл бұрын
@@carter.coleman he failed.
@Fyouandthehorseyoucomeinon 3 ай бұрын
The ak 😊😊😊
Cool Items Official
Рет қаралды 55 МЛН
mxgptv
Рет қаралды 1,7 М.
Horsepower House
Рет қаралды 11 М.
Chandan_edit _n.3
Рет қаралды 11 МЛН
Мастерская Синдиката
Рет қаралды 3 МЛН