| AC Vents Update 8/4/22 | The vents needed are from the JDM Oem 96-98 bezel. In my opinion for the price they are currently going for if even found in stock, you are better off cutting up the usdm bezel and adapting the top portion to the aftermarket bezel as stated and shown in video. My trip to the junkyard to find vents from other model vehicles using digital calipers for more precise measurements concluded that vents from the usdm Honda/Acura models Civic (EG, EF, Wagovan, 7th gen, and 99-00), Acura (DA, DC, TSX, 2nd gen Legend) and Accord 3rd-5th, and 7th did NOT work. I ended up finding vents from a 6th gen Toyota celica (specifically a 94') to work the best but not without modification. I had to cut the center divider off the aftermarket bezel as well as the material behind the bezel and trim some material off on the sides near the hazard and rear defroster (I think that what the button is for), and a bit on the botton as well but not the material the surronds the touchscreen on top. I also had to cut the passenger side vent almost in half due to it not being able to be flush with the bezel due to the limited space behind the vent. It didn't look as good as I hoped but definitely looked better than before, and it helped push and direct airflow way better. At the end of the day I still recommend adapting the oem vent housing onto the aftermarket bezel, same amount of work without the extra cost buying vents.

Thanks for the shoutout dude, and glad to see your video is getting attention as well!

I didn’t know if this helps but that whole issue about the air vents not fitting is because the mount you bout was for a RIGHT hand drive. they are mapped a little differently. if you ever want to fix it just make sure it’s for the left hand drive car.

Just as a note the Aussie delivered model has the same vent face as the stock one I had to pull the vents and glue them into the new surround. I have watched your video and the other guys video and found them to be very helpful

Thing as I don’t understand is why don’t people just get the air ducts for that model - piece that you bought and then get a saw cut them in half the tubes and then graph your tube onto the new tube so you need to measure from the part you cut and then you grab those two pieces. It’s actually making into one part part that’s custom

Literally EXACTLY what I've been looking to do recently!!! Thanks for the video (:

Done my like 4 years ago I like ur dash part but my came out way better i use 99 dash part my cup holder still all together

I had to do similar cuts around gages in my 89 accord so I could access th gage cluster without pulling th entire front trim around the dash, a couple cuts right at th corners and th top cover pops off ez

Yasssss needed this

Using 99-00 original radio bezel lets you use a double din 7" radio rather than 9". I myself prefer 7" double din radio as they give better sound quality than the new off brand 9" china radios.

WOW YOU DID A GOOD JOB

Great !! I will do it!

Looks awesome

Will this fit in my eg civic coupe... want be different...

Hey bro quick question this might be dumb,but if I were to install this and new speakers how would I connect my speakers to the digital display ? 17 here and just got an ek

when u said cut the top part, you mean cut both tops and glue it somehow to the other cut bezel? with a strong epoxy maybe?

Alright so quick question I installed a reason in my car a few months ago when I have it on high volume the bass is horrible and it stutters hella and shuts the radio off and when it is on low volume it does the same sometimes any tips?

Does the display link to a back up camera?

On your civic the on compartment area where you have above the cup holders I have a cd player there for the cd changer it came with. Is it still the same?

Do you still have you oem radio?

So where can get the cover, to mount the screen on...??

Whats the difference between the left and right bezel? Which should i buy? And also any luck on figuring out the air vents yet?

Did this radio connect to hondata by chance?

Teria como me informar aonde encontro os difusores de ar dessa moldura?

Think I could do this in my 99 si

What did u use to cut the area to fit the climate control

The Filipino/Asian Civic is different from the one you have re the top vents.

your vents are nasty why U dont clean IT before install those back

Looks good But if you are more perfectionist Like me I would not be happy But other than that looks good

Can you download KZfaq on that radio? Lol