1996 Jeep XJ Ignition Switch Replacement

  Рет қаралды 22,921

Swat's Corner

Swat's Corner

2 жыл бұрын

Replacing the ignition switch in my 1996 Jeep Cherokee XJ plus an unhappy surprise requiring me to replace the ignition cylinder.
I am not a mechanic, but I do enjoy working on my own vehicles. These videos are intended for general information and guidance. Do your own homework and research before attempting any auto repair. Always consult a professional when in doubt.

Пікірлер: 29
@JerimyRobinsonFixxxeR
@JerimyRobinsonFixxxeR Жыл бұрын
What a cheap and silly design for the locking cylinder... mine did the same thing and left me stranded a ways from home late last night. But Your video saved me a whole BUNCH of hassle, time, and headache. It's already fixed this morning thanks to you! Thanks!
@swatscorner
@swatscorner Жыл бұрын
Glad to hear you got it fixed so quickly!
@martinmoran2881
@martinmoran2881 Ай бұрын
Muy buena información mil gracias
@swatscorner
@swatscorner Ай бұрын
¡De nada!
@erichdouglas3012
@erichdouglas3012 Жыл бұрын
Just helped me do my own! Thank you man, it was exactly what I needed
@swatscorner
@swatscorner Жыл бұрын
Glad it helped!!
@jeepinbanditrider
@jeepinbanditrider Жыл бұрын
That broken "hat" that engages the ignition switch on the end is a common break on 95-96 XJs. If you can get the "Hat" off you can swap the lock cylinder itself, so you can keep your original key, but it's a PITA to get that hat off the end without breaking things apart. Certainly a lot easier ot use the new key along with your old one, just more inconvenient.
@swatscorner
@swatscorner Жыл бұрын
Someone on the XJ Preservation Society FB page told me the same thing. It is a pain to use two keys, but it has worked OK. Had to do this in the 99, and it was so easy - keyed right to existing.
@user-fh3bw1re4d
@user-fh3bw1re4d 5 ай бұрын
That helps a lot ❤
@swatscorner
@swatscorner 5 ай бұрын
Glad it helped!! Thanks for watching!
@kaleb1233
@kaleb1233 4 ай бұрын
If any of you are stuck/stranded because of this problem remove the lock cylinder and use needle nose to crank your Jeep for the time being.
@swatscorner
@swatscorner 4 ай бұрын
Great tip!! Thanks!!
@DakotaBrandes-zo8ki
@DakotaBrandes-zo8ki Ай бұрын
I have a problem with mine i got an 88 jeep Cherokee 4wd 6cy 4.0l xj when i turn the key it cranks but once i let go of the key it just shuts off
@swatscorner
@swatscorner Ай бұрын
Crank but no start could be a lot of things. Hope you can figure it out!
@nine_2_fivetoes964
@nine_2_fivetoes964 2 ай бұрын
So I have a 1996 jeep Cherokee and it wants to start without a key in the ignition I replaced the starter and have the same issue do you thinking doing this would fix it
@swatscorner
@swatscorner 2 ай бұрын
If it’s starting without the key, it seems like the ignition lock cylinder would be the problem. Hate to tell you to throw parts at it, but may be worth a shot.
@anthonythompsonjr81
@anthonythompsonjr81 Жыл бұрын
Yeah,and thanks alot,god bless
@swatscorner
@swatscorner Жыл бұрын
Thanks a lot!
@danielleon-jy3wn
@danielleon-jy3wn Жыл бұрын
So wasn’t the ignition switch . Was the key cylinder that caused failure ??
@swatscorner
@swatscorner Жыл бұрын
Yes. That’s correct
@anthonythompsonjr81
@anthonythompsonjr81 Жыл бұрын
I took this off but can't remove the cylinder it's was locked,but does this part come with a new cylinder?I'm no mechanic,just going off utube.
@swatscorner
@swatscorner Жыл бұрын
Yes, part came with new cylinder. It was super easy to do. Wish they made them for the pre 97. I have to use two keys on one of my 1996s.
@Holm.Q
@Holm.Q Жыл бұрын
That halo light is supposed to stay on at all times??
@swatscorner
@swatscorner Жыл бұрын
I think it stays on temporarily and fades out.
@jeepinbanditrider
@jeepinbanditrider Жыл бұрын
I forget the time frame but it comes on anytime a door is opened then fades out after a bit.
@user-ng4ch6cb4t
@user-ng4ch6cb4t 7 ай бұрын
How can I take the cylinder out without
@swatscorner
@swatscorner 6 ай бұрын
Without being able to get the key out? That was my problem!!
@vonkanon3091
@vonkanon3091 7 ай бұрын
How much for the new switch? I was quoted $450.
@swatscorner
@swatscorner 6 ай бұрын
It was only about $40 at the auto parts store.
Automotive Electrical Diagnosis // 5V Reference circuit
15:55
Reignited - Cycle and Automotive
Рет қаралды 72 М.
WORLD'S SHORTEST WOMAN
00:58
Stokes Twins
Рет қаралды 130 МЛН
Я обещал подарить ему самокат!
01:00
Vlad Samokatchik
Рет қаралды 9 МЛН
Это реально работает?!
00:33
БРУНО
Рет қаралды 3,3 МЛН
2000 Jeep Cherokee XJ Ignition Switch and Ignition Switch pin
8:09
Rusty Rays Garage
Рет қаралды 105 М.
1999 Jeep XJ Ignition Lock Cylinder - a Catch-22
6:07
Swat's Corner
Рет қаралды 8 М.
How To Replace An Ignition Switch In A Jeep Cherokee
5:47
Dillyfab
Рет қаралды 31 М.
Jeep Grand Cherokee, Ignition switch tilt wheelm removal
6:26
Crashman1963
Рет қаралды 30 М.
How to  bypass SKIM immobilize on a Jeep Grand Cherokee 1999 to 2004
10:14