No video

1998 Kawasaki ZX9R - Project Shinobi, Episode 1 - Bodywork Off, Let's See What Horrors Lurk Beneath!

  Рет қаралды 6,434

Kev's Shed

Kev's Shed

Күн бұрын

Пікірлер: 47
@timselbie3419
@timselbie3419 3 жыл бұрын
Love the mechanical archaeology, it never ceases to amaze me what the previous Neanderthal has done before !
@KevsShed
@KevsShed 3 жыл бұрын
I know, but it wouldn't be a proper project without having to put right others bodges I guess! 😆
@markwellington4376
@markwellington4376 6 ай бұрын
Just brought myself this bike in black as a non runner (due to rattling timing chain) and loving this step by step videos. Great job 👏🏻
@DaemonWulf7
@DaemonWulf7 19 күн бұрын
many a great man has falling trying to vanquish a Kawasaki bolt.
@gkbike7002
@gkbike7002 Жыл бұрын
I've just bought that bike, its 90% mint. Owned by a copper, full service history, all original. Few cosmetic scuffs, but looks almost new
@Unfunny_Username_389
@Unfunny_Username_389 2 жыл бұрын
I thought the observation about the side-stand was very smart. Not the wrong one, after all. Just seems like it because someone's tried to raise the back with shorter dog-bones in an attempt to make it turn in quicker. Better idea was to fit a shock off a ZX12R.
@KevsShed
@KevsShed 2 жыл бұрын
Yeah, that would have worked. I actually have a shock from a 2009 ZX10R sat around gathering dust, I wonder if that could be utilised to good effect! 🤔
@coolNightFever
@coolNightFever 2 жыл бұрын
Love watching your videos man, you saying "i'm not a prof. mechanic" but you're better than most of the mechanics i know, that's for sure.
@KevsShed
@KevsShed 2 жыл бұрын
Cheers bud 👍🏻
@HalfdeadRider
@HalfdeadRider 2 жыл бұрын
Nice mate, just got recommended this as never came across your channel before. I'm going to enjoy this, I have the E1, amazing bikes still.
@KevsShed
@KevsShed 2 жыл бұрын
Glad you found me! Enjoy 👌🏻😎
@jasonjason7277
@jasonjason7277 3 жыл бұрын
its nice to see the ZXR finally getting attention. i look forward to following your progress.
@KevsShed
@KevsShed 3 жыл бұрын
Cheers bud 👍🏻
@AdeReeves
@AdeReeves 3 жыл бұрын
About blooming time 😂
@KevsShed
@KevsShed 3 жыл бұрын
I know, I know! Got round to it eventually though! 😂👌🤓
@jordangraham9533
@jordangraham9533 3 жыл бұрын
Looking forward to seeing you fix it up Kevin
@patrickwalsh6873
@patrickwalsh6873 3 жыл бұрын
Great stuff, mate. Thanks so much for all the quality content of the channel.
@KevsShed
@KevsShed 3 жыл бұрын
Glad you enjoy it! 👌😎
@steveadams8799
@steveadams8799 3 жыл бұрын
Good to see the ZX9R project started. I used to own a 99 C2 about 7 years ago and loved it. I have just got another one that is in similar condition to yours and I’m halfway through its restoration. Should sit nicely alongside my GTR1400 when finished. Reference the headlight, mine was also in rag order and not many are around on eBay. Found out that the ZX6R G is identical, so a bit easier to find one in good nick. Look forward to watching your progress.🍻
@KevsShed
@KevsShed 3 жыл бұрын
Yeah , I discovered that with the headlight and have already managed to bag a nice one, you'll see in a later episode ;)
@Squishington3rd
@Squishington3rd 3 жыл бұрын
Glad I'm not the only one really struggling to get the rear tail fairing bolts out as the front two are jammed on mine too. Going to thoroughly enjoy watching this transformation and hopefully pick up tips and ideas along the way. Would !lve to do a full resto on my C1 9R one day
@KevsShed
@KevsShed 3 жыл бұрын
Yeah they were seized solid! lucky they were the only thing that didn't really want to play ball so far!
@Squishington3rd
@Squishington3rd 3 жыл бұрын
@@KevsShed did you have to use an HSS bit to get at the head or were they quite soft? I think mine are the originals
@KevsShed
@KevsShed 3 жыл бұрын
@@Squishington3rd I did use a HSS Bit as that was what I had to hand although they aren't particularly tough bolts to be fair! Once the plastics were off, a decent amount of heat from the blow torch allowed the remaining studs to be removed with molegrips pretty easily!
@tonymontana897
@tonymontana897 11 ай бұрын
Use penetration spray in advance before attempting to rock them out.
@jordangraham9533
@jordangraham9533 3 жыл бұрын
I used to have e1 Kawasaki zx9r
@markconlon814
@markconlon814 3 жыл бұрын
great vid, unless i missed it, it looks like your catch bottles on the air ducts are missing !!
@KevsShed
@KevsShed 3 жыл бұрын
Nah, I think it was probably the angle I was holding them or something as they are both there! Plenty that I do need to get for this bike though so please follow the project! 👍😎
@markconlon814
@markconlon814 3 жыл бұрын
@@KevsShed I plan too , I am looking forward to part2 !!
@KevsShed
@KevsShed 3 жыл бұрын
@@markconlon814 New videos on the channel every Sunday bud!
@nitramh24
@nitramh24 3 жыл бұрын
If there’s oil in the coolant, there’s probably a head gasket leak. Hope you do the job in a video... I changed mine last year, took me a couple of weeks as I had to service everything once you crack the engine open😂
@KevsShed
@KevsShed 3 жыл бұрын
Yep, the whole engine is coming apart, everything is being replaced! 👍
@nitramh24
@nitramh24 3 жыл бұрын
@@KevsShed Hone the cylinders and install new piston rings while you re at it👍 Will be as new after, since you’re in there. Removing the cyl block is a piece of cake
@nitramh24
@nitramh24 3 жыл бұрын
Yours is a 99 model, the 98 is all blue. You should install an exhaust system from an E model, that’s an awesome upgrade as the e exhaust is modelled after the akra-racing exhaust system👍 they’re dead cheap on the zx9 pages.
@KevsShed
@KevsShed 3 жыл бұрын
You're spoiling the surprise! 😂😂😂
@KevsShed
@KevsShed 3 жыл бұрын
BTW, it can't be a 99 as it's on an S plate, 99 would have been a T or a V. I actually didn't know that about the colours though and if that is the case then mine is likely wearing different bodywork to what it had from the factory!
@nitramh24
@nitramh24 3 жыл бұрын
@@KevsShed Yea, at least the fairings are from a 99👍 Cool that you re doing the exhaust, if that’s the surprise, the c system is horrible, mine cracked, dont think too many read the comments tho, hope I didnt spoil it for ya...
@galwaytribesman9289
@galwaytribesman9289 Жыл бұрын
Up the Irons
@michaelraley3301
@michaelraley3301 10 ай бұрын
Hey, I'm just now seeing your channel ive just acquired a zx9r I live in the U.S my bike has 30k miles on it. Maintenance things I'm doing valve adjustment, new chains sprockets and clutch any other things you think I might need to look at while getting this bike into top shape also doing compression check to see how healthy the engine runs solid so far
@guystevens162
@guystevens162 3 жыл бұрын
Nice bike. So what is project then. Just restoring back to original 🙂
@KevsShed
@KevsShed 3 жыл бұрын
Yes mate, that’s the plan 👌🏻😎
@UnCivilEngineerIRL
@UnCivilEngineerIRL 3 жыл бұрын
Jesus, you're murdering the previous owner in a similar way to what he's done to that bike ! An eye for an eye leaves the world blind hahaha
@KevsShed
@KevsShed 3 жыл бұрын
😂😂😂 True! I just don't understand how anyone can treat a bike this poorly!
@UnCivilEngineerIRL
@UnCivilEngineerIRL 3 жыл бұрын
@@KevsShed he might have been a here-tech hahaha
@KevsShed
@KevsShed 3 жыл бұрын
😂
Kawasaki ninja zx9r full restoration
40:43
Azz Kam
Рет қаралды 14 М.
Doing This Instead Of Studying.. 😳
00:12
Jojo Sim
Рет қаралды 36 МЛН
Kind Waiter's Gesture to Homeless Boy #shorts
00:32
I migliori trucchetti di Fabiosa
Рет қаралды 12 МЛН
Алексей Щербаков разнес ВДВшников
00:47
❌Разве такое возможно? #story
01:00
Кэри Найс
Рет қаралды 1,5 МЛН
Who is Mr. Sam?
14:11
1320video
Рет қаралды 351 М.
2025 Can-Am Origin Review - The 115km "Adventure" Bike
12:22
FortNine
Рет қаралды 459 М.
Carbon Fiber Bodywork
7:42
Extra Medium
Рет қаралды 2 М.
Doing This Instead Of Studying.. 😳
00:12
Jojo Sim
Рет қаралды 36 МЛН